[PATCH v13 1/3] dt-bindings: i2c: npcm7xx: add NPCM I2C controller

[Tali Perry]

Hi Rob,

On Sat, May 23, 2020 at 1:47 AM Rob Herring <robh+dt at kernel.org> wrote:
>
> On Fri, May 22, 2020 at 4:42 PM Rob Herring <robh at kernel.org> wrote:
> >
> > On Fri, 22 May 2020 14:33:10 +0300, Tali Perry wrote:
> > > Added device tree binding documentation for Nuvoton BMC
> > > NPCM I2C controller.
> > >
> > > Signed-off-by: Tali Perry <tali.perry1 at gmail.com>
> > > ---
> > >  .../bindings/i2c/nuvoton,npcm7xx-i2c.yaml     | 60 +++++++++++++++++++
> > >  1 file changed, 60 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
> > >
> >
> >
> > My bot found errors running 'make dt_binding_check' on your patch:
> >
> > Error: Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.example.dts:22.28-29 syntax error
> > FATAL ERROR: Unable to parse input tree
> > scripts/Makefile.lib:312: recipe for target 'Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.example.dt.yaml' failed
> > make[1]: *** [Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.example.dt.yaml] Error 1
> > make[1]: *** Waiting for unfinished jobs....
> > Makefile:1300: recipe for target 'dt_binding_check' failed
> > make: *** [dt_binding_check] Error 2
> >
> > See https://patchwork.ozlabs.org/patch/1296162
> >
> > If you already ran 'make dt_binding_check' and didn't see the above
> > error(s), then make sure dt-schema is up to date:
> >
> > pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade
> >
> > Please check and re-submit.
>
> Why do you keep sending new versions with the same problem? It won't
> get reviewed until this is fixed. This isn't a free automated service
> to throw things at to see if they work. I have to review the failures.
>
> Rob

Definitely not trying to use the Bot to check my yaml. On the first
version the dt-check was not updated on my side.
On the previous version I updated according to the bot explanations.
Found an error and fixed it. Now I don't see any errors. with latest
dt-check.
I did:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master
--upgrade
make dt_binding_check

And got a clean log, no warnings or errors. Was I suppose to check
anything else?

Thanks,
Tali