[PATCH v10 1/3] dt-bindings: i2c: npcm7xx: add NPCM I2C controller
Anton Kachalov
rnouse at google.com
Thu May 14 01:03:26 AEST 2020
The example uses "bus-frequency" while description says "clock-frequency"
for bus speed.
On Sun, May 10, 2020, 12:27 Tali Perry <tali.perry1 at gmail.com> wrote:
> Added device tree binding documentation for Nuvoton BMC
> NPCM I2C controller.
>
> Signed-off-by: Tali Perry <tali.perry1 at gmail.com>
> ---
> .../bindings/i2c/nuvoton,npcm7xx-i2c.yaml | 62 +++++++++++++++++++
> 1 file changed, 62 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
>
> diff --git
> a/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
> b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
> new file mode 100644
> index 000000000000..d6f553154388
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
> @@ -0,0 +1,62 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/i2c/nuvoton,npcm7xx-i2c.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: nuvoton NPCM7XX I2C Controller Device Tree Bindings
> +
> +description: |
> + The NPCM750x includes sixteen I2C bus controllers. All Controllers
> support
> + both master and slave mode. Each controller can switch between master
> and slave
> + at run time (i.e. IPMB mode). Each controller has two 16 byte HW FIFO
> for TX and
> + RX.
> +
> +maintainers:
> + - Tali Perry <tali.perry1 at gmail.com>
> +
> +properties:
> + compatible:
> + - const: nuvoton,npcm7xx-i2c
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> + items:
> + - description: Reference clock for the I2C bus
> +
> + clock-frequency:
> + maxItems: 1
> + default: 100000
> + enum: [ 100000, 400000, 1000000 ]
> + description:
> + SCL frequency to use (in Hz). If omitted, 100kHz is used.
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> +
> +allOf:
> + - $ref: /schemas/i2c/i2c-controller.yaml#
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + i2c0: i2c at 80000 {
> + compatible = "nuvoton,npcm750-i2c";
> + reg = <0x80000 0x1000>;
> + clocks = <&clk NPCM7XX_CLK_APB2>;
> + bus-frequency = <100000>;
> + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&smb0_pins>;
> + };
> +
> +...
> --
> 2.22.0
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20200513/9f5e3dd0/attachment.htm>
More information about the openbmc
mailing list