IPMI Raw Commands

[Anony Mous]

To whom it may concern,

1. Does openbmc ipmitool support any of the ipmi raw commands? Most of them
(such as the one below) returns "invalid command".
ipmitool raw <netfn> <command>

Where:
netfn = storage = 0x0a
command = enter sdr respository update mode = 0x2a

The above command was executed on the BMC and the following error returned:

"Unable to send RAW command (channel=0x0 netfn=0xa lun=0x0 cmd=0x2a
rsp=0xc1): Invalid command"

2.  Can the ipmi raw commands be executed on the BMC itself or does it need
to be executed from an external source (such as a processor connected to
the BMC)?

3. Do any kind of privilege settings need to be modified in order to
execute any ipmi raw commands?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20200306/ebf6cb64/attachment.htm>