system is hang during uboot with wolfpass recipe firmware

zhang_cy1989 zhang_cy1989 at
Fri Mar 6 12:08:18 AEDT 2020

Dear All
    I build openbmc recipies with
    And got 64M size firmware.
    Then put it into flash of real board.
    Unfortunately, I got these tips during uboot phase:

U-Boot 2016.07 (Mar 05 2020 - 09:21:17 +0000)

 SOC : AST2500-A2

RST : 0x11

PLL :     24 MHz

CPU :    792 MHz

MEM :    792 MHz, EEC: Disable, Cache: Disable

VGA :    16 MiB

DRAM :   init by SOC

       Watchdog enabled

DRAM:  496 MiB

Flash: 64 MiB

*** Warning - bad CRC, using default environment


In:    serial

Out:   serial

Err:   serial

Un-Protected 1 sectors

Un-Protected 1 sectors

Erasing Flash...

. done

Erased 1 sectors

Writing to Flash... done

Protected 1 sectors

Protected 1 sectors




Error: FTGMAC100#0 address not set.

, FTGMAC100#1

Error: FTGMAC100#1 address not set.

After error tip:Error: FTGMAC100#1 address not set. 
The system is hang and can not go ahead.

How can I solve this problem, please help me.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <>

More information about the openbmc mailing list