[PATCH v1 1/4] dt-binding: watchdog: add restart priority documentation

[Tomer Maimon]

On Sun, 1 Mar 2020 at 12:06, Guenter Roeck <linux at roeck-us.net> wrote:

> On 3/1/20 1:40 AM, Tomer Maimon wrote:
> > Add device tree restart priority documentation.
> >
>
> I think this warrants an explanation _why_ this is needed.
> What is the use case ? Not just theory, please.
>

In the NPCM750 there is two initiated restarts:

   - Software reset
   - WD reset

the Software restart found at NPCM reset driver
https://github.com/torvalds/linux/blob/master/drivers/reset/reset-npcm.c

In NPCM WD driver the restart is configure as well, I will like to add the
priority so the user will have maximum flexibility if he using both restarts

Thanks,

Tomer



> Guenter
>
> > Signed-off-by: Tomer Maimon <tmaimon77 at gmail.com>
> > ---
> >  Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt | 2 ++
> >  1 file changed, 2 insertions(+)
> >
> > diff --git
> a/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt
> b/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt
> > index 6d593003c933..0a0f86a25eb0 100644
> > --- a/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt
> > +++ b/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt
> > @@ -17,6 +17,7 @@ Required clocking property, have to be one of:
> >
> >  Optional properties:
> >  - timeout-sec : Contains the watchdog timeout in seconds
> > +- nuvoton,restart-priority : Contains the card restart priority.
> >
> >  Example:
> >
> > @@ -25,4 +26,5 @@ timer at f000801c {
> >      interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
> >      reg = <0xf000801c 0x4>;
> >      clocks = <&clk NPCM7XX_CLK_TIMER>;
> > +     nuvoton,restart-priority = <155>;
> >  };
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20200301/661f2cf7/attachment.htm>