sensor disabled

[Patrick Williams]

On Wed, Jun 10, 2020 at 01:26:30PM +0000, 周 远清 wrote:
> Hi，
> 
>     After openbmc is started, all sensors are in the disabled state, please help guide, where need to be configured to enable by default?

Is this all sensors or just DIMM sensors like you've listed below?
Likely, DIMM information comes from your BIOS over IPMI so the sensors
won't be enabled until after your host starts up and begins
communication.

> dimm0            | disabled          | ns
> dimm1            | disabled          | ns
> dimm2            | disabled          | ns
> dimm3            | disabled          | ns
> dimm4            | disabled          | ns
> dimm5            | disabled          | ns
> dimm6            | disabled          | ns
> dimm7            | disabled          | ns
> dimm8            | disabled          | ns
> dimm9            | disabled          | ns
> dimm10           | disabled          | ns
> dimm11           | disabled          | ns
> dimm12           | disabled          | ns
> dimm13           | disabled          | ns
> dimm14           | disabled          | ns
> dimm15           | disabled          | ns
> dimm0_temp       | disabled          | ns
> dimm1_temp       | disabled          | ns
> dimm2_temp       | disabled          | ns
> dimm3_temp       | disabled          | ns
> dimm4_temp       | disabled          | ns
> dimm5_temp       | disabled          | ns

I don't directly recognize this output.  What tool is it coming from?
It may also help to know what machine / architecture this system is.

-- 
Patrick Williams
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20200610/efa782aa/attachment.sig>