Re: [PATCH linux dev-5.4 2/3] ARM: dts: aspeed: rainier: Add CFAM reset GPIO

[Andrew Jeffery]

On Fri, 24 Jul 2020, at 12:00, Joel Stanley wrote:
> The GPIO on Q0 is used for resetting the CFAM of the processor that the
> ASPEED master is connected to.
> 
> The signal is wired as active high on the first pass systems.
> 
> Signed-off-by: Joel Stanley <joel at jms.id.au>

Reviewed-by: Andrew Jeffery <andrew at aj.id.au>