[PATCH linux dev-5.4 1/2] clk: AST2600: Add mux for EMMC clock
Eddie James
eajames at linux.ibm.com
Thu Jul 9 06:24:53 AEST 2020
The EMMC clock can be derived from either the HPLL or the MPLL. Register
a clock mux so that the rate is calculated correctly based upon the
parent.
Signed-off-by: Eddie James <eajames at linux.ibm.com>
---
drivers/clk/clk-ast2600.c | 49 ++++++++++++++++++++++++++++++++-------
1 file changed, 41 insertions(+), 8 deletions(-)
diff --git a/drivers/clk/clk-ast2600.c b/drivers/clk/clk-ast2600.c
index 35f53956c762..bbacaccad554 100644
--- a/drivers/clk/clk-ast2600.c
+++ b/drivers/clk/clk-ast2600.c
@@ -131,6 +131,18 @@ static const struct clk_div_table ast2600_eclk_div_table[] = {
{ 0 }
};
+static const struct clk_div_table ast2600_emmc_extclk_div_table[] = {
+ { 0x0, 2 },
+ { 0x1, 4 },
+ { 0x2, 6 },
+ { 0x3, 8 },
+ { 0x4, 10 },
+ { 0x5, 12 },
+ { 0x6, 14 },
+ { 0x7, 16 },
+ { 0 }
+};
+
static const struct clk_div_table ast2600_mac_div_table[] = {
{ 0x0, 4 },
{ 0x1, 4 },
@@ -390,6 +402,11 @@ static struct clk_hw *aspeed_g6_clk_hw_register_gate(struct device *dev,
return hw;
}
+static const char *const emmc_extclk_parent_names[] = {
+ "emmc_extclk_hpll_in",
+ "mpll",
+};
+
static const char * const vclk_parent_names[] = {
"dpll",
"d1pll",
@@ -459,16 +476,32 @@ static int aspeed_g6_clk_probe(struct platform_device *pdev)
return PTR_ERR(hw);
aspeed_g6_clk_data->hws[ASPEED_CLK_UARTX] = hw;
- /* EMMC ext clock divider */
- hw = clk_hw_register_gate(dev, "emmc_extclk_gate", "hpll", 0,
- scu_g6_base + ASPEED_G6_CLK_SELECTION1, 15, 0,
- &aspeed_g6_clk_lock);
+ /* EMMC ext clock */
+ hw = clk_hw_register_fixed_factor(dev, "emmc_extclk_hpll_in", "hpll",
+ 0, 1, 2);
if (IS_ERR(hw))
return PTR_ERR(hw);
- hw = clk_hw_register_divider_table(dev, "emmc_extclk", "emmc_extclk_gate", 0,
- scu_g6_base + ASPEED_G6_CLK_SELECTION1, 12, 3, 0,
- ast2600_div_table,
- &aspeed_g6_clk_lock);
+
+ hw = clk_hw_register_mux(dev, "emmc_extclk_mux",
+ emmc_extclk_parent_names,
+ ARRAY_SIZE(emmc_extclk_parent_names), 0,
+ scu_g6_base + ASPEED_G6_CLK_SELECTION1, 11, 1,
+ 0, &aspeed_g6_clk_lock);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+
+ hw = clk_hw_register_gate(dev, "emmc_extclk_gate", "emmc_extclk_mux",
+ 0, scu_g6_base + ASPEED_G6_CLK_SELECTION1,
+ 15, 0, &aspeed_g6_clk_lock);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+
+ hw = clk_hw_register_divider_table(dev, "emmc_extclk",
+ "emmc_extclk_gate", 0,
+ scu_g6_base +
+ ASPEED_G6_CLK_SELECTION1, 12,
+ 3, 0, ast2600_emmc_extclk_div_table,
+ &aspeed_g6_clk_lock);
if (IS_ERR(hw))
return PTR_ERR(hw);
aspeed_g6_clk_data->hws[ASPEED_CLK_EMMC] = hw;
--
2.24.0
More information about the openbmc
mailing list