[PATCH v5 7/7] dt-bindings: usb: add documentation for aspeed usb-vhub

[Benjamin Herrenschmidt]

On Thu, 2020-02-27 at 15:05 -0800, rentao.bupt at gmail.com wrote:

 .../...

You haven't fixed the problem spotted by Rob which is that the example
is now out of sync, it's missing the required properties.

Also long run I think best is going to have a child node per downstream
port, so we create a matching linux struct device. This will make it
easier to deal with the other device-controller in the ast2600 which is
basically one of these without a vhub above it.

> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - interrupts
> +  - aspeed,vhub-downstream-ports
> +  - aspeed,vhub-generic-endpoints
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/aspeed-clock.h>
> +    vhub: usb-vhub at 1e6a0000 {
> +            compatible = "aspeed,ast2500-usb-vhub";
> +            reg = <0x1e6a0000 0x300>;
> +            interrupts = <5>;
> +            clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
> +            pinctrl-names = "default";
> +            pinctrl-0 = <&pinctrl_usb2ad_default>;
> +    };
> --