No event logs in webUI
Thu Nguyen OS
thu at os.amperecomputing.com
Wed Dec 23 20:05:00 AEDT 2020
Those sensors event log should be logged in
Health -> Event log -> Select system log type = Event.
From: openbmc <openbmc-bounces+thu=os.amperecomputing.com at lists.ozlabs.org> on behalf of "Mohammed.Habeeb ISV" <mohammed.habeeb at inventec.com>
Date: Tuesday, December 22, 2020 at 08:47
To: "openbmc at lists.ozlabs.org" <openbmc at lists.ozlabs.org>
Subject: No event logs in webUI
I am new to openBmc . Currently, I don’t see any events logged in webUI
Server health > Event log page. I see “No events have been logged yet.”
When I see the sel elist using ipmitool there are lot of logs shown. I am not sure if it is a bug in webUI or there are no events to be shown.
What kind of events are shown in Server health > Event log page. Any example would be helpful. Currently using openbmc 2.7 version.
ipmitool -I lanplus -U root -P 0penBmc -H 10.6.141.197 sel elist
16bd | 12/18/20 | 12:04:41 UTC | Temperature SCM_TEMP | Lower Non-critical going low | Deasserted | Reading 34 < Threshold 5 degrees C
16be | 12/18/20 | 12:04:41 UTC | Temperature SCM_TEMP | Lower Critical going low | Deasserted | Reading 34 < Threshold 0 degrees C
16bf | 12/18/20 | 12:04:57 UTC | Temperature SCM_TEMP | Lower Non-critical going low | Asserted | Reading 252 < Threshold 5 degrees C
16c0 | 12/18/20 | 12:04:57 UTC | Temperature SCM_TEMP | Lower Critical going low | Asserted | Reading 252 < Threshold 0 degrees C
Thanks & regards
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the openbmc