Pass the gpio value from phospohr-gpio-monitor to other applications

[Velumani T-ERS,HCLTech]

Hi Team,

I understand, when the gpio event occurs, phospohr-gpio-monitor starts the target unit and exits.

So whenever gpio event occurs, is there any way to pass the gpio value from phospohr-gpio-monitor to other running applications like x86-power-control.

Regards,
Velu
::DISCLAIMER::
________________________________
The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects.
________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20200820/34ede60d/attachment-0001.htm>