[PATCH v0 linux master] i2c/busses: Avoid i2c interrupt status clear race condition.

Benjamin Herrenschmidt benh at kernel.crashing.org
Thu Apr 30 20:52:56 AEST 2020


On Wed, 2020-04-29 at 11:37 +0800, ryan_chen wrote:
> In AST2600 there have a slow peripheral bus between CPU
>  and i2c controller.
> Therefore GIC i2c interrupt status clear have delay timing,
> when CPU issue write clear i2c controller interrupt status.
> To avoid this issue, the driver need have read after write
>  clear at i2c ISR.
> 
> Signed-off-by: ryan_chen <ryan_chen at aspeedtech.com>

Acked-by: Benjamin Herrenschmidt <benh at kernel.crashing.org>
--


> ---
>  drivers/i2c/busses/i2c-aspeed.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/i2c/busses/i2c-aspeed.c
> b/drivers/i2c/busses/i2c-aspeed.c
> index 07c1993274c5..f51702d86a90 100644
> --- a/drivers/i2c/busses/i2c-aspeed.c
> +++ b/drivers/i2c/busses/i2c-aspeed.c
> @@ -603,6 +603,7 @@ static irqreturn_t aspeed_i2c_bus_irq(int irq,
> void *dev_id)
>  	/* Ack all interrupts except for Rx done */
>  	writel(irq_received & ~ASPEED_I2CD_INTR_RX_DONE,
>  	       bus->base + ASPEED_I2C_INTR_STS_REG);
> +	readl(bus->base + ASPEED_I2C_INTR_STS_REG);
>  	irq_remaining = irq_received;
>  
>  #if IS_ENABLED(CONFIG_I2C_SLAVE)
> @@ -645,9 +646,11 @@ static irqreturn_t aspeed_i2c_bus_irq(int irq,
> void *dev_id)
>  			irq_received, irq_handled);
>  
>  	/* Ack Rx done */
> -	if (irq_received & ASPEED_I2CD_INTR_RX_DONE)
> +	if (irq_received & ASPEED_I2CD_INTR_RX_DONE) {
>  		writel(ASPEED_I2CD_INTR_RX_DONE,
>  		       bus->base + ASPEED_I2C_INTR_STS_REG);
> +		readl(bus->base + ASPEED_I2C_INTR_STS_REG);
> +	}
>  	spin_unlock(&bus->lock);
>  	return irq_remaining ? IRQ_NONE : IRQ_HANDLED;
>  }



More information about the openbmc mailing list