Polling OpenBMC using IPMB

Vijay Khemka vijaykhemka at fb.com
Thu Apr 30 07:18:38 AEST 2020


Also define your device in DTS compatible with ipmb-dev driver.

From: openbmc <openbmc-bounces+vijaykhemka=fb.com at lists.ozlabs.org> on behalf of "Bhat, Sumanth" <sumanth.bhat at intel.com>
Date: Wednesday, April 29, 2020 at 3:07 AM
To: Konstantin Klubnichkin <kitsok at yandex-team.ru>, "openbmc at lists.ozlabs.org" <openbmc at lists.ozlabs.org>
Subject: RE: Polling OpenBMC using IPMB

Hi Konstantin,
   Ipmbbridge is the right service. Please override the https://github.com/openbmc/ipmbbridge/blob/master/ipmb-channels.json with the IPMB channel relevant on your board.

Thanks,
Sumanth

From: openbmc <openbmc-bounces+sumanth.bhat=intel.com at lists.ozlabs.org> On Behalf Of Konstantin Klubnichkin
Sent: Wednesday, April 29, 2020 3:29 PM
To: openbmc at lists.ozlabs.org
Subject: Polling OpenBMC using IPMB



Hello all!

I've got a Purley motherboard with one of the I2C buses going out from AST2500 to external controller.
It gets BMC data (sensors, MAC address, etc) by polling it with IPMB.

I'm trying to find out how to implement it in OpenBMC.
Is it ipmbbridge service used for this?

Thank you!
--
Best regards,
Konstantin Klubnichkin,
lead firmware engineer,
server hardware R&D group,
Yandex Moscow office.
tel: +7-903-510-33-33

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20200429/1b70126e/attachment-0001.htm>


More information about the openbmc mailing list