question about sensor sel

阿桂 guilin1985 at 126.com
Tue Apr 28 11:24:14 AEST 2020




Thanks very much. I will try to thant




在 2020-04-28 03:14:14,"Bills, Jason M" <jason.m.bills at linux.intel.com> 写道:
>
>
>On 4/25/2020 8:44 PM, 阿桂 wrote:
>> Hi, all:
>> 
>> Why is the result empty when I run 'ipmitool sel list', as follows:
>> root at lon:/var/log# ipmitool sel list
>> SEL has no entries
>> 
>> Below is what I changed:
>> 
>> 1. I added yaml config file of those sensors 'ipmi-sensors.yaml'
>> 
>> 2. I added below compling option to module 'phosphor-sel-logger'';
>> EXTRA_OECMAKE += "-DSEL_LOGGER_MONITOR_THRESHOLD_EVENTS=ON"
>> 
>> 3. I modified the config settings of rsyslog as 
>> https://lists.ozlabs.org/pipermail/openbmc/2019-November/019619.html 
>> refer to.
>>      so, I can see a journalctl log,  ipmi_sel and redfish file at /var/log;
>> 
>> 
>> Below two commands can get wanted results. But why the command 'ipmitool 
>> sel list' can't? what else should I modify?
>It looks like the only thing missing is the override to the IPMI Get SEL 
>Entry command to make it look in the /var/log/ipmi_sel file instead of 
>on D-Bus.
>
>You can find the override implemented in intel-ipmi-oem, here: 
>https://github.com/openbmc/intel-ipmi-oem/blob/master/src/storagecommands.cpp#L827.
>
>> root at lon:/var/log# ipmitool sensor list
>> ambient_temp     | na         |            | na    | na        | na      
>>    | na        | na        | na        | na
>> cpu0_temp          | na         |            | na    | na        | na    
>>      | na        | na        | na        | na
>> cpu1_temp          | na         |            | na    | na        | na    
>>      | na        | na        | na        | na
>> psu_vol_in          | 12.031     | Volts      | ok    | 0.000     | 
>> 10.971    | 11.448    | 12.985    | 13.462    | 0.000
>> psu_curr_in         | 0.275      | Amps       | ok    | 0.000     | 
>> 0.275     | 0.550     | 49.775    | 69.850    | 0.000
>> psu_power_in     | 3.150      | Watts      | ok    | 0.000     | 3.150  
>>     | 6.300     | 497.700   | 796.950   | 0.000
>> battery         | 0.345      | Volts      | ok    | 0.000     | 1.995    
>>   | 2.490     | 3.300     | 3.495     | 0.000
>> fan1             | na         |            | na    | na        | na      
>>    | na        | na        | na        | na
>> fan2             | na         |            | na    | na        | na      
>>    | na        | na        | na        | na
>> fan3             | na         |            | na    | na        | na      
>>    | na        | na        | na        | na
>> fan4             | na         |            | na    | na        | na      
>>    | na        | na        | na        | na
>> fan5             | na         |            | na    | na        | na      
>>    | na        | na        | na        | na
>> fan6             | na         |            | na    | na        | na      
>>    | na        | na        | na        | na
>> fan7             | na         |            | na    | na        | na      
>>    | na        | na        | na        | na
>> fan8             | na         |            | na    | na        | na      
>>    | na        | na        | na        | na
>> 
>> root at lon:/var/log# journalctl |grep sel
>> Apr 25 15:16:36 lon sel-logger[240]: battery sensor crossed a warning 
>> low threshold going low. Reading=0.344000 Threshold=2.500000.
>> Apr 25 15:16:36 lon sel-logger[240]: battery sensor crossed a critical 
>> low threshold going low. Reading=0.344000 Threshold=2.000000.
>> Apr 25 15:16:36 lon sel-logger[240]: psu_curr_in sensor crossed a 
>> warning low threshold going low. Reading=0.361000 Threshold=0.600000.
>> Apr 25 15:16:36 lon sel-logger[240]: psu_power_in sensor crossed a 
>> warning low threshold going low. Reading=4.667744 Threshold=6.500000.
>> 
>> root at lon:/var/log# ls
>> ipmi_sel          lastlog           obmc-console.log  private/          
>> redfish           state             tallylog
>> 
>> root at lon:/var/log# cat ipmi_sel
>> 2020-04-25T15:16:36.125187+00:00 
>> 1,2,50FFFF,20,/xyz/openbmc_project/sensors/voltage/battery,1
>> 2020-04-25T15:16:36.245679+00:00 
>> 1,2,52FFFF,20,/xyz/openbmc_project/sensors/voltage/battery,1
>> 2020-04-25T15:16:36.705420+00:00 
>> 2,2,50FFFF,20,/xyz/openbmc_project/sensors/current/psu_curr_in,1
>> 2020-04-25T15:16:36.764327+00:00 
>> 3,2,50FFFF,20,/xyz/openbmc_project/sensors/power/psu_power_in,1
>> root at lon:/var/log# cat redfish
>> 2020-04-25T15:16:19.003251+00:00 
>> OpenBMC.0.1.ServiceFailure,phosphor-pid-control.service
>> 2020-04-25T15:16:36.125187+00:00 
>> OpenBMC.0.1.SensorThresholdWarningLowGoingLow,battery,0.344000,2.500000
>> 2020-04-25T15:16:36.245679+00:00 
>> OpenBMC.0.1.SensorThresholdCriticalLowGoingLow,battery,0.344000,2.000000
>> 2020-04-25T15:16:36.705420+00:00 
>> OpenBMC.0.1.SensorThresholdWarningLowGoingLow,psu_curr_in,0.361000,0.600000
>> 2020-04-25T15:16:36.764327+00:00 
>> OpenBMC.0.1.SensorThresholdWarningLowGoingLow,psu_power_in,4.667744,6.500000
>> 2020-04-25T15:16:51.611885+00:00 
>> OpenBMC.0.1.ServiceFailure,obmc-read-eeprom at system-chassis-motherboard.service
>> 
>> 
>> 
>> 
>> 
>> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20200428/e5f58b24/attachment.htm>


More information about the openbmc mailing list