question aboat sensor sel

[阿桂]

Hi, all:


Why is the result empty when I run 'ipmitool sel list', as follows:




Below is what I changed:


1. I added yaml config file of those sensors 'ipmi-sensors.yaml'


2. I added below compling option to module 'phosphor-sel-logger'';
EXTRA_OECMAKE += "-DSEL_LOGGER_MONITOR_THRESHOLD_EVENTS=ON"


3. I modified the config settings of rsyslog as https://lists.ozlabs.org/pipermail/openbmc/2019-November/019619.html refer to.
    so, I can see a journalctl log,  ipmi_sel and redfish file at /var/log;




Below two commands can get wanted results. But why the command 'ipmitool sel list' can't? what else should I modify?







-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20200426/e0a8cb81/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 4100 bytes
Desc: not available
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20200426/e0a8cb81/attachment-0003.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 26910 bytes
Desc: not available
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20200426/e0a8cb81/attachment-0004.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 70582 bytes
Desc: not available
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20200426/e0a8cb81/attachment-0005.png>