phosphor-ipmi-flash: tools build fail

[Patrick Venture]

On Tue, Mar 31, 2020 at 1:42 AM CS20 CTCchien <CTCCHIEN at nuvoton.com> wrote:
>
> Hi Patrick,
>
> I upload a commit for phosphor-ipmi-flash/tools, but Jenkins shows build fail.
> I add two more options for nuvoton pci device
> enable-nuvoton-p2a-vga and enable-nuvoton-p2a-mbox
> and I build with below three command sets on my PC
> and they all build successfully


Take a look at the output in Jenkins more specifically as it'll try to
format the code first - chances are this is what is failing.

>
> 1.
> ./bootstrap.sh
> ./configure --disable-build-bmc-blob-handler
> make
> sudo make install
>
> 2.
> ./bootstrap.sh
> ./configure --disable-build-bmc-blob-handler  --enable-nuvoton-p2a-mbox
> make
> sudo make install
>
> 3.
> ./bootstrap.sh
> ./configure --disable-build-bmc-blob-handler  --enable-nuvoton-p2a-vga
> make
> sudo make install
>
> so would you please help to solve this problem? I have no idea what's wrong.
> Thanks a lot
>
> B.R.
> Medad
> ________________________________
> ________________________________
>  The privileged confidential information contained in this email is intended for use only by the addressees as indicated by the original sender of this email. If you are not the addressee indicated in this email or are not responsible for delivery of the email to such a person, please kindly reply to the sender indicating this fact and delete all copies of it from your computer and network server immediately. Your cooperation is highly appreciated. It is advised that any unauthorized use of confidential information of Nuvoton is strictly prohibited; and any information in this email irrelevant to the official business of Nuvoton shall be deemed as neither given nor endorsed by Nuvoton.