Re: [PATCH linux dev-5.3 1/2] ARM: dts: Aspeed: Tacoma: Add gpio-key definitions

Andrew Jeffery andrew at aj.id.au
Tue Oct 8 11:17:53 AEDT 2019



On Fri, 4 Oct 2019, at 07:54, Eddie James wrote:
> Add gpio-keys for various signals on Tacoma.
> 
> Signed-off-by: Eddie James <eajames at linux.ibm.com>

Acked-by: Andrew Jeffery <andrew at aj.id.au>

> ---
>  arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 60 +++++++++++++++++++++
>  1 file changed, 60 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts 
> b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
> index 52c4374ce0d9..ea6e666d0caa 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
> @@ -3,6 +3,7 @@
>  /dts-v1/;
>  
>  #include "aspeed-g6.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
>  #include <dt-bindings/leds/leds-pca955x.h>
>  
>  / {
> @@ -33,6 +34,65 @@
>  			reg = <0xba000000 0x2000000>; /* 32M */
>  		};
>  	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +
> +		air-water {
> +			label = "air-water";
> +			gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
> +			linux,code = <ASPEED_GPIO(Q, 7)>;
> +		};
> +
> +		checkstop {
> +			label = "checkstop";
> +			gpios = <&gpio0 ASPEED_GPIO(E, 3) GPIO_ACTIVE_LOW>;
> +			linux,code = <ASPEED_GPIO(E, 3)>;
> +		};
> +
> +		ps0-presence {
> +			label = "ps0-presence";
> +			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
> +			linux,code = <ASPEED_GPIO(H, 3)>;
> +		};
> +
> +		ps1-presence {
> +			label = "ps1-presence";
> +			gpios = <&gpio0 ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>;
> +			linux,code = <ASPEED_GPIO(E, 5)>;
> +		};
> +	};
> +
> +	gpio-keys-polled {
> +		compatible = "gpio-keys-polled";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		poll-interval = <1000>;
> +
> +		fan0-presence {
> +			label = "fan0-presence";
> +			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
> +			linux,code = <4>;
> +		};
> +
> +		fan1-presence {
> +			label = "fan1-presence";
> +			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
> +			linux,code = <5>;
> +		};
> +
> +		fan2-presence {
> +			label = "fan2-presence";
> +			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
> +			linux,code = <6>;
> +		};
> +
> +		fan3-presence {
> +			label = "fan3-presence";
> +			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
> +			linux,code = <7>;
> +		};
> +	};
>  };
>  
>  &fmc {
> -- 
> 2.23.0
> 
>


More information about the openbmc mailing list