[PATCH v5 0/2] i2c: npcm7xx: new driver for I2C controller
Tali Perry
tali.perry1 at gmail.com
Wed Nov 20 01:49:28 AEDT 2019
Nuvoton NPCM7XX I2C Controller
NPCM7xx includes 16 I2C controllers. This driver operates the controller.
This module also includes a slave mode.
---
v5 -> v4:
- support recovery
- master-slave switch support needed for IPMB
v4 -> v3:
- typo on cover letter.
v3 -> v2:
- fix dt binding: compatible name: omit "bus"
v2 -> v1:
- run check patch in strict mode.
- use linux crc.
- define regs in constant offset without base.
- remove debug prints.
- no declarations for local functions.
v1: initial version
Signed-off-by: Tali Perry <tali.perry1 at gmail.com>
Reviewed-by: Rob Herring <robh at kernel.org>
---
Tali Perry (2):
dt-bindings: i2c: npcm7xx: * add binding for i2c controller
i2c: npcm7xx:
.../devicetree/bindings/i2c/i2c-npcm7xx.txt | 29 +
drivers/i2c/busses/Kconfig | 11 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-npcm7xx.c | 2486 +++++++++++++++++
4 files changed, 2527 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-npcm7xx.txt
create mode 100644 drivers/i2c/busses/i2c-npcm7xx.c
--
2.22.0
More information about the openbmc
mailing list