Fan speed controller validation

[Kumar Thangavel]

Hi All,

Our product have Inlet temperature sensor and  two Fan with TACHO sensor feedback connected through Fan speed controller to BMC SoC.
We can able to read temperature sensor and control the Fan (PWM) through D-Bus interface.
All product specific configuration declared as JSON configuration file in Entity-Manager .
What is the procedure to  test  Fan Speed Controller(FSC)  based on STEP and PID based algorithm.

Please find the attached FanSensor dbus logs for your reference.

Thanks,
Kumar.








::DISCLAIMER::
________________________________
The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects.
________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20191115/c474f1aa/attachment.htm>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: fansensor_nodes.txt
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20191115/c474f1aa/attachment.txt>