[External] Power-on monitor for phosphor-hwmon question

Ivan Li11 rli11 at lenovo.com
Thu Nov 7 19:34:50 AEDT 2019


> -----Original Message-----
> From: James Feist <james.feist at linux.intel.com>
> Sent: Thursday, November 7, 2019 7:39 AM
> To: Ivan Li11 <rli11 at lenovo.com>; Matt Spinler <mspinler at linux.ibm.com>;
> openbmc at lists.ozlabs.org
> Subject: Re: [External] Power-on monitor for phosphor-hwmon question
> 
> On 11/5/19 11:25 PM, Ivan Li11 wrote:
> >> -----Original Message-----
> >> From: James Feist <james.feist at linux.intel.com>
> >> Sent: Tuesday, October 22, 2019 11:51 PM
> >> To: Matt Spinler <mspinler at linux.ibm.com>; Ivan Li11
> >> <rli11 at lenovo.com>; openbmc at lists.ozlabs.org
> >> Subject: Re: [External] Power-on monitor for phosphor-hwmon question
> >>
> >> On 10/22/19 6:23 AM, Matt Spinler wrote:
> >>>
> >>>
> >>> On 10/21/2019 6:02 AM, Ivan Li11 wrote:
> >>>>
> >>>> Hi Team,
> >>>>
> >>>> Does anyone have suggestion for this ?
> >>>>
> >>> Hi, you're right, it doesn't support that yet.  We've had a few
> >>> internal discussions about how to handle that gracefully, though our
> >>> platforms don't use sel-logger, but nothing solid came out of them
> >>> and we don't have anything scheduled yet.
> >>>
> >>> It would be easy enough to have a watch on the PGOOD property, and
> >>> then do you what you want, like maybe turning off the thresholds.
> >>>
> >>> I heard that the d-bus sensors repository has some sort of support
> >>> for this, but since we don't use it I'm not sure what all that
> >>> entails. I think it may also force you to replace
> >>> phosphor-inventor-manager with entity-manager.
> >>
> >> It should force you to switch 100%, but you would at least have to run both.
> >>
> >> Here's what dbus-sensors does:
> >>
> >>
> https://github.com/openbmc/dbus-sensors/blob/432d1edf7ac86f6955827330
> >> 7
> >> a59e4b1cf86b8a6/src/Utils.cpp#L141
> >>
> >> Basically just a dbus-match that sets a "powerStatusOn" bool that can
> >> be queried. Depending on the sensor type thresholds don't get crossed
> >> if that bool is set. We also have a similar bool for bios post, as
> >> some sensors come up later after power on.
> >>
> >
> > I try to use dbus-sensors and set "powerStatusOn" bool, but still have
> incorrect threshold logs during power on(S0) to power off(S5) state.
> > Could you help to comment on it ?
> >
> 
> This has only been tested with x86-power-control, are you using that project
> for power control or something else?
> 

Got it. I currently use phosphor-state-manager for power control.

> >>>
> >>>> Thanks your great support in advance.
> >>>>
> >>>> *From:*openbmc
> <openbmc-bounces+rli11=lenovo.com at lists.ozlabs.org>
> >> *On
> >>>> Behalf Of *Ivan Li11
> >>>> *Sent:* Friday, October 18, 2019 5:59 PM
> >>>> *To:* openbmc at lists.ozlabs.org
> >>>> *Subject:* [External] Power-on monitor for phosphor-hwmon question
> >>>>
> >>>> Hi Team,
> >>>>
> >>>> We found that there's no power-on monitor mechanism in
> >> phosphor-hwmon.
> >>>>
> >>>> https://github.com/openbmc/phosphor-hwmon
> >>>>
> >>>> And it will cause incorrect threshold logs to be added to journal
> >>>> log by 'sel-logger' when system is in power off(S5) state.
> >>>>
> >>>> Is there any plan to implement it? Or other repository we can refer to ?
> >>>>
> >>>> Thanks,
> >>>>
> >>>> Ivan
> >>>>
> >>>


More information about the openbmc mailing list