Questions about openbmc-test-automation

[Rahul Maheshwari]

Yes, that is correct way.

On Wed, Nov 6, 2019 at 11:22 AM Tony Lee (李文富) <Tony.Lee at quantatw.com>
wrote:

> Hi Rahul,
>
> For example, case "Retrieve IP Address Via IPMI And Verify Using Redfish"
> in /ipmi/test_ipmi_network.robot.
> The new way is as follows:
>
> IPMI network channel logically starts from 1. For example, once it figure
> out the channel count is 3,
> we can retrieve IP addresses through channels 1, 2, and 3, and verify them
> correspond to eth0, eth1, and eth2, respectively by redfish.
> Is it right?
>
> Thanks
> Best Regards,
> Tony
>
> From: Rahul Maheshwari <rahulmaheshwari01 at gmail.com>
> Sent: Tuesday, November 5, 2019 6:51 PM
> To: Tony Lee (李文富) <Tony.Lee at quantatw.com>
> Cc: openbmc at lists.ozlabs.org
> Subject: Re: Questions about openbmc-test-automation
>
> Thanks for pointing that out. Passing interface/channel number is an
> easier option but we should be avoiding passing environment variable unless
> there is no other way. I would say better way to overcome this is to figure
> out the channel count using "ip addr" command from BMC cli.
> Let us know if that sounds good to you.
> Also let us know if you would like to drop code change for the same?
>
> Thanks
> Rahul
>
>
>
>
>
>
> On Tue, Nov 5, 2019 at 2:28 PM Tony Lee (李文富) <mailto:
> Tony.Lee at quantatw.com> wrote:
> Hi Rahul,
>
> I'm wondering that why "REDFISH_NW_ETH0" is hardcode as
> "Managers/bmc/EthernetInterfaces/eth0/" in /data/variables.py
>
> https://github.com/openbmc/openbmc-test-automation/blob/master/data/variables.py#L155
> Furthermore, the command "lan print" didn't specify the channel number in
> /ipmi/test_ipmi_network.robot.
> Therefore, the default will print information on the first found LAN
> channel.
>
> Isn't it more reasonable to set the interface and the channel number as
> environment variables and give them default values?
>
> Thanks
> Best Regards,
> Tony
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20191106/89f22b5e/attachment-0001.htm>