[PATCH v2 1/3] dt-binding: reset: add NPCM reset controller documentation

Tomer Maimon tmaimon77 at gmail.com
Fri Nov 1 01:18:52 AEDT 2019


Hi Philipp,

Thanks a lot for your comments.

On Tue, 29 Oct 2019 at 17:15, Philipp Zabel <p.zabel at pengutronix.de> wrote:

> Hi Tomer,
>
> On Mon, 2019-10-28 at 17:54 +0200, Tomer Maimon wrote:
> > Added device tree binding documentation for Nuvoton BMC
> > NPCM reset controller.
> >
> > Signed-off-by: Tomer Maimon <tmaimon77 at gmail.com>
> > ---
> >  .../bindings/reset/nuvoton,npcm-reset.txt     | 35 +++++++++++++++++++
> >  1 file changed, 35 insertions(+)
> >  create mode 100644
> Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt
> >
> > diff --git
> a/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt
> b/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt
> > new file mode 100644
> > index 000000000000..94793285a2ac
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt
> > @@ -0,0 +1,35 @@
> > +Nuvoton NPCM Reset controller
> > +
> > +In the NPCM Reset controller boot the USB PHY, USB host
> > +and USB device initialize.
>
> Isn't this just a detail of the driver implementation?
>
> > +Required properties:
> > +- compatible : "nuvoton,npcm750-reset" for NPCM7XX BMC
>
> Is this driver expected to be reused for other SoCs?
>
Yes.

>
> > +- reg : specifies physical base address and size of the register.
> > +- #reset-cells: must be set to 1
> > +
> > +Optional property:
> > +- nuvoton,sw-reset-number - Contains the software reset number to
> restart the SoC.
> > +  NPCM7xx contain four software reset that represent numbers 1 to 4.
>
> What's the difference between the four restart bits? Is this something
> that has to be configured per board?
>
The SW reset lines are the same, but we like to give full flexibility to
choose the line to use for board reset.

>
> > +  If 'nuvoton,sw-reset-number' is not specfied software reset is
> disabled.
> > +
> > +Example:
> > +     rstc: rstc at f0801000 {
> > +             compatible = "nuvoton,npcm750-reset";
> > +             reg = <0xf0801000 0x70>;
> > +             #reset-cells = <1>;
> > +             nuvoton,sw-reset-number = <2>;
> > +     };
> > +
> > +Specifying reset lines connected to IP NPCM7XX modules
> > +======================================================
> > +example:
> > +
> > +        spi0: spi at ..... {
> > +                ...
> > +                resets = <&rstc NPCM7XX_RESET_PSPI1>;
> > +                ...
> > +        };
> > +
> > +The index could be found in <dt-bindings/reset/nuvoton,npcm7xx-reset.h>.
>
> regards
> Philipp
>
>
Regards,

Tomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20191031/53a7b022/attachment-0001.htm>


More information about the openbmc mailing list