[PATCH v2 dev-5.0 3/4] media: aspeed: remove checking of VE_INTERRUPT_CAPTURE_COMPLETE
Jae Hyun Yoo
jae.hyun.yoo at linux.intel.com
Thu May 2 07:37:49 AEST 2019
VE_INTERRUPT_CAPTURE_COMPLETE and VE_INTERRUPT_COMP_COMPLETE are
not set at the same time but the current interrupt handling
mechanism of this driver doesn't clear the interrupt flag until
both two are set, and this behavior causes unnecessary interrupt
handler calls. In fact, this driver provides JPEG format only so
taking care of the VE_INTERRUPT_COMP_COMPLETE is enough for getting
compressed image frame so this commit gets rid of the
VE_INTERRUPT_CAPTURE_COMPLETE checking logic to simplify the logic.
Handling of VE_INTERRUPT_CAPTURE_COMPLETE could be added back later
when it's actually needed.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo at linux.intel.com>
Reviewed-by: Eddie James <eajames at linux.ibm.com>
---
Changes since v1:
None
drivers/media/platform/aspeed-video.c | 12 ++++--------
1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index 429f676f9dea..77c209a472ca 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -463,8 +463,7 @@ static int aspeed_video_start_frame(struct aspeed_video *video)
aspeed_video_write(video, VE_COMP_ADDR, addr);
aspeed_video_update(video, VE_INTERRUPT_CTRL, 0,
- VE_INTERRUPT_COMP_COMPLETE |
- VE_INTERRUPT_CAPTURE_COMPLETE);
+ VE_INTERRUPT_COMP_COMPLETE);
aspeed_video_update(video, VE_SEQ_CTRL, 0,
VE_SEQ_CTRL_TRIG_CAPTURE | VE_SEQ_CTRL_TRIG_COMP);
@@ -570,8 +569,7 @@ static irqreturn_t aspeed_video_irq(int irq, void *arg)
}
}
- if ((sts & VE_INTERRUPT_COMP_COMPLETE) &&
- (sts & VE_INTERRUPT_CAPTURE_COMPLETE)) {
+ if (sts & VE_INTERRUPT_COMP_COMPLETE) {
struct aspeed_video_buffer *buf;
u32 frame_size = aspeed_video_read(video,
VE_OFFSET_COMP_STREAM);
@@ -600,11 +598,9 @@ static irqreturn_t aspeed_video_irq(int irq, void *arg)
VE_SEQ_CTRL_FORCE_IDLE |
VE_SEQ_CTRL_TRIG_COMP, 0);
aspeed_video_update(video, VE_INTERRUPT_CTRL,
- VE_INTERRUPT_COMP_COMPLETE |
- VE_INTERRUPT_CAPTURE_COMPLETE, 0);
+ VE_INTERRUPT_COMP_COMPLETE, 0);
aspeed_video_write(video, VE_INTERRUPT_STATUS,
- VE_INTERRUPT_COMP_COMPLETE |
- VE_INTERRUPT_CAPTURE_COMPLETE);
+ VE_INTERRUPT_COMP_COMPLETE);
if (test_bit(VIDEO_STREAMING, &video->flags) && buf)
aspeed_video_start_frame(video);
--
2.21.0
More information about the openbmc
mailing list