[PATCH dev-5.0 3/7] clk: aspeed: Setup video engine clocking

[Joel Stanley]

On Thu, 21 Mar 2019 at 19:30, Eddie James <eajames at linux.ibm.com> wrote:
>
> Add the video engine reset bit. Add eclk mux and clock divider table.
>
> Signed-off-by: Eddie James <eajames at linux.ibm.com>
> Acked-by: Stephen Boyd <sboyd at kernel.org>
> ---
>  drivers/clk/clk-aspeed.c | 41 +++++++++++++++++++++++++++++++++++++++--
>  1 file changed, 39 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/clk-aspeed.c b/drivers/clk/clk-aspeed.c
> index 5961367..f16ce7d 100644
> --- a/drivers/clk/clk-aspeed.c
> +++ b/drivers/clk/clk-aspeed.c
> @@ -87,7 +87,7 @@ struct aspeed_clk_gate {
>  /* TODO: ask Aspeed about the actual parent data */
>  static const struct aspeed_gate_data aspeed_gates[] = {
>         /*                               clk rst   name                 parent  flags */
> -       [ASPEED_CLK_GATE_ECLK] =        {  0, -1, "eclk-gate",          "eclk", 0 }, /* Video Engine */
> +       [ASPEED_CLK_GATE_ECLK] =        {  0,  6, "eclk-gate",          "eclk", 0 }, /* Video Engine */

As I've said on previous reviews, it's incorrect to add the reset line
to the clock, and have it be a separate reset device.

When you add the reset bit to the clk device, we control both the
clock gating (bit 0, SCU0C) and the reset line (bit 6, SCU04) with the
clk device. You can see this happen in aspeed_clk_enable if
gate->reset_idx >= 0.

Assuming you are doing this on purpose, can you explain why you want
to have the reset device and the clk device both control the one bit?

Cheers,

Joel


>         [ASPEED_CLK_GATE_GCLK] =        {  1,  7, "gclk-gate",          NULL,   0 }, /* 2D engine */
>         [ASPEED_CLK_GATE_MCLK] =        {  2, -1, "mclk-gate",          "mpll", CLK_IS_CRITICAL }, /* SDRAM */
>         [ASPEED_CLK_GATE_VCLK] =        {  3,  6, "vclk-gate",          NULL,   0 }, /* Video Capture */
> @@ -113,6 +113,24 @@ struct aspeed_clk_gate {
>         [ASPEED_CLK_GATE_LHCCLK] =      { 28, -1, "lhclk-gate",         "lhclk", 0 }, /* LPC master/LPC+ */
>  };
>
> +static const char * const eclk_parent_names[] = {
> +       "mpll",
> +       "hpll",
> +       "dpll",
> +};
> +
> +static const struct clk_div_table ast2500_eclk_div_table[] = {
> +       { 0x0, 2 },
> +       { 0x1, 2 },
> +       { 0x2, 3 },
> +       { 0x3, 4 },
> +       { 0x4, 5 },
> +       { 0x5, 6 },
> +       { 0x6, 7 },
> +       { 0x7, 8 },
> +       { 0 }
> +};
> +
>  static const struct clk_div_table ast2500_mac_div_table[] = {
>         { 0x0, 4 }, /* Yep, really. Aspeed confirmed this is correct */
>         { 0x1, 4 },
> @@ -192,18 +210,21 @@ static struct clk_hw *aspeed_ast2500_calc_pll(const char *name, u32 val)
>
>  struct aspeed_clk_soc_data {
>         const struct clk_div_table *div_table;
> +       const struct clk_div_table *eclk_div_table;
>         const struct clk_div_table *mac_div_table;
>         struct clk_hw *(*calc_pll)(const char *name, u32 val);
>  };
>
>  static const struct aspeed_clk_soc_data ast2500_data = {
>         .div_table = ast2500_div_table,
> +       .eclk_div_table = ast2500_eclk_div_table,
>         .mac_div_table = ast2500_mac_div_table,
>         .calc_pll = aspeed_ast2500_calc_pll,
>  };
>
>  static const struct aspeed_clk_soc_data ast2400_data = {
>         .div_table = ast2400_div_table,
> +       .eclk_div_table = ast2400_div_table,
>         .mac_div_table = ast2400_div_table,
>         .calc_pll = aspeed_ast2400_calc_pll,
>  };
> @@ -317,6 +338,7 @@ struct aspeed_reset {
>         [ASPEED_RESET_PECI]     = 10,
>         [ASPEED_RESET_I2C]      =  2,
>         [ASPEED_RESET_AHB]      =  1,
> +       [ASPEED_RESET_VIDEO]    =  6,
>
>         /*
>          * SCUD4 resets start at an offset to separate them from
> @@ -522,6 +544,22 @@ static int aspeed_clk_probe(struct platform_device *pdev)
>                 return PTR_ERR(hw);
>         aspeed_clk_data->hws[ASPEED_CLK_24M] = hw;
>
> +       hw = clk_hw_register_mux(dev, "eclk-mux", eclk_parent_names,
> +                                ARRAY_SIZE(eclk_parent_names), 0,
> +                                scu_base + ASPEED_CLK_SELECTION, 2, 0x3, 0,
> +                                &aspeed_clk_lock);
> +       if (IS_ERR(hw))
> +               return PTR_ERR(hw);
> +       aspeed_clk_data->hws[ASPEED_CLK_ECLK_MUX] = hw;
> +
> +       hw = clk_hw_register_divider_table(dev, "eclk", "eclk-mux", 0,
> +                                          scu_base + ASPEED_CLK_SELECTION, 28,
> +                                          3, 0, soc_data->eclk_div_table,
> +                                          &aspeed_clk_lock);
> +       if (IS_ERR(hw))
> +               return PTR_ERR(hw);
> +       aspeed_clk_data->hws[ASPEED_CLK_ECLK] = hw;
> +
>         /*
>          * TODO: There are a number of clocks that not included in this driver
>          * as more information is required:
> @@ -531,7 +569,6 @@ static int aspeed_clk_probe(struct platform_device *pdev)
>          *   RGMII
>          *   RMII
>          *   UART[1..5] clock source mux
> -        *   Video Engine (ECLK) mux and clock divider
>          */
>
>         for (i = 0; i < ARRAY_SIZE(aspeed_gates); i++) {
> --
> 1.8.3.1
>