[PATCH 2/8] dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema
Rob Herring
robh+dt at kernel.org
Fri Jun 28 00:32:12 AEST 2019
On Wed, Jun 26, 2019 at 9:55 PM Andrew Jeffery <andrew at aj.id.au> wrote:
>
>
>
> On Wed, 26 Jun 2019, at 23:17, Rob Herring wrote:
> > On Wed, Jun 26, 2019 at 1:21 AM Andrew Jeffery <andrew at aj.id.au> wrote:
> > > + The pin controller node should be the child of a syscon node with the
> > > + required property:
> > > +
> > > + - compatible: Should be one of the following:
> > > + "aspeed,ast2400-scu", "syscon", "simple-mfd"
> > > + "aspeed,g4-scu", "syscon", "simple-mfd"
> > > +
> > > + Refer to the the bindings described in
> > > + Documentation/devicetree/bindings/mfd/syscon.txt
> > > +
> > > + For the AST2400 pinmux, each mux function has only one associated pin group.
> > > + Each group is named by its function. The following values for the function
> > > + and groups properties are supported:
> > > +
> > > + ACPI ADC0 ADC1 ADC10 ADC11 ADC12 ADC13 ADC14 ADC15 ADC2 ADC3 ADC4 ADC5 ADC6
> > > + ADC7 ADC8 ADC9 BMCINT DDCCLK DDCDAT EXTRST FLACK FLBUSY FLWP GPID GPID0 GPID2
> > > + GPID4 GPID6 GPIE0 GPIE2 GPIE4 GPIE6 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4
> > > + I2C5 I2C6 I2C7 I2C8 I2C9 LPCPD LPCPME LPCRST LPCSMI MAC1LINK MAC2LINK MDIO1
> > > + MDIO2 NCTS1 NCTS2 NCTS3 NCTS4 NDCD1 NDCD2 NDCD3 NDCD4 NDSR1 NDSR2 NDSR3 NDSR4
> > > + NDTR1 NDTR2 NDTR3 NDTR4 NDTS4 NRI1 NRI2 NRI3 NRI4 NRTS1 NRTS2 NRTS3 OSCCLK
> > > + PWM0 PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7 RGMII1 RGMII2 RMII1 RMII2 ROM16 ROM8
> > > + ROMCS1 ROMCS2 ROMCS3 ROMCS4 RXD1 RXD2 RXD3 RXD4 SALT1 SALT2 SALT3 SALT4 SD1
> > > + SD2 SGPMCK SGPMI SGPMLD SGPMO SGPSCK SGPSI0 SGPSI1 SGPSLD SIOONCTRL SIOPBI
> > > + SIOPBO SIOPWREQ SIOPWRGD SIOS3 SIOS5 SIOSCI SPI1 SPI1DEBUG SPI1PASSTHRU
> > > + SPICS1 TIMER3 TIMER4 TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2 TXD3 TXD4 UART6
> > > + USB11D1 USB11H2 USB2D1 USB2H1 USBCKI VGABIOS_ROM VGAHS VGAVS VPI18 VPI24
> > > + VPI30 VPO12 VPO24 WDTRST1 WDTRST2
> >
> > This should be a schema. You need to define child nodes and list these
> > as values for 'function' and 'group'. Ideally, the child nodes would
> > have some sort of pattern, but if not, you can just match on '^.*$'
> > under patternProperties.
>
> The children don't have any pattern in their node name, which drives
> me towards the '^.*$' pattern match, however, what I've found is that
> I get the following errors for some of the relevant dts files:
>
> ```
> /home/andrew/src/linux/aspeed/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dt.yaml: compatible: ['aspeed,g4-pinctrl'] is not of type 'object'
> /home/andrew/src/linux/aspeed/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dt.yaml: pinctrl-names: ['default'] is not of type 'object'
> /home/andrew/src/linux/aspeed/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dt.yaml: pinctrl-0: [[7, 8, 9, 10, 11, 12]] is not of type 'object'
> /home/andrew/src/linux/aspeed/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dt.yaml: phandle: [[13]] is not of type 'object'
> /home/andrew/src/linux/aspeed/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dt.yaml: $nodename: ['pinctrl'] is not of type 'object'
> /home/andrew/src/linux/aspeed/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dt.yaml: compatible: ['aspeed,g4-pinctrl'] is not of type 'object'
> /home/andrew/src/linux/aspeed/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dt.yaml: pinctrl-names: ['default'] is not of type 'object'
> /home/andrew/src/linux/aspeed/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dt.yaml: pinctrl-0: [[9, 10, 11, 12]] is not of type 'object'
> /home/andrew/src/linux/aspeed/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dt.yaml: phandle: [[13]] is not of type 'object'
> /home/andrew/src/linux/aspeed/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dt.yaml: $nodename: ['pinctrl'] is not of type 'object'
> ```
>
The problem is "^.*$" matches both properties and child nodes.
> We shouldn't be expecting these properties in the child nodes, so
> something is busted. Looking at processed-schema.yaml, we have:
>
> ```
> - $filename: /home/andrew/src/linux/aspeed/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
> $id: http://devicetree.org/schemas/pinctrl/aspeed,ast2400-pinctrl.yaml#
> $schema: http://devicetree.org/meta-schemas/core.yaml#
> patternProperties:
> ^.*$:
> patternProperties:
> ^function|groups$:
> allOf:
> - {$ref: /schemas/types.yaml#/definitions/string}
> - additionalItems: false
> items:
> enum: [ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
> ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
> EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0,
> GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4,
> I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK,
> MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2,
> NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4,
> NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0,
> PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, RMII2,
> ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, RXD4,
> SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD, SGPMO,
> SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ,
> SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU, SPICS1,
> TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3,
> TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM,
> VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2]
> maxItems: 1
> minItems: 1
> type: array
> pinctrl-[0-9]+: true
> properties: {phandle: true, pinctrl-names: true, status: true}
> type: object
> pinctrl-[0-9]+: true
> properties:
> $nodename: true
> compatible:
> additionalItems: false
> items:
> - enum: ['aspeed,ast2400-pinctrl', 'aspeed,g4-pinctrl']
> maxItems: 1
> minItems: 1
> type: array
> phandle: true
> pinctrl-names: true
> status: true
> required: [compatible]
> select:
> properties:
> compatible:
> contains:
> enum: ['aspeed,ast2400-pinctrl', 'aspeed,g4-pinctrl']
> required: [compatible]
> title: ASPEED AST2400 Pin Controller
> ```
>
> `properties: {phandle: true, pinctrl-names: true, status: true}` has been
> merged into my '^.*$' patternProperty, presumably partly from
> pinctrl-consumer.yaml, and this seems to be the source of the bad
> output. If as a hack I change my pattern to '^.*_default$' the problem
> goes away as we no longer try to enforce the constraints on properties
> provided by other bindings, but the problem is the node names are
> largely freeform[1] (unless I enforce a naming constraint as part of my
> bindings?).
>
> [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt?h=v5.2-rc6#n112
>
> >
> > BTW, You can put the names under a 'definitions' key and then use
> > '$ref' to reference them from function and group to avoid duplicating
> > the names. Or use patternProperties with '^(function|group)$'.
>
> I've used the patternProperties approach above as I couldn't get the
> definitions/$ref approach to work. I did the following:
The problem is we'd need to process the schema under definitions. The
YAML encoding we validate against always encodes strings as arrays as
dtc has no way of knowing if a given property is a string array or
single string. So to avoid a bunch of boilerplate in every binding, we
process the schema to transform single strings into arrays of length
1.
It's probably best to stick with the patternProperties approach. I
think you can do something like this:
"^.*$":
if:
type: object
then:
patternProperties:
'^(function|group)$':
...
I'm not completely certain this works though, so if you can send me an
updated binding with what you have so far I can test it out.
Rob
More information about the openbmc
mailing list