[RFC v2 dev-5.1 2/5] ARM: dts: aspeed: add I2C buffer mode support
Jae Hyun Yoo
jae.hyun.yoo at linux.intel.com
Wed Jun 26 06:51:06 AEST 2019
Byte mode currently this driver uses makes lots of interrupt call
which isn't good for performance and it makes the driver very
timing sensitive. To improve performance of the driver, this commit
adds buffer mode transfer support which uses I2C SRAM buffer
instead of using a single byte buffer.
AST2400:
It has 2 KBytes (256 Bytes x 8 pages) of I2C SRAM buffer pool from
0x1e78a800 to 0x1e78afff that can be used for all busses with
buffer pool manipulation. To simplify implementation for supporting
both AST2400 and AST2500, it assigns each 128 Bytes per bus without
using buffer pool manipulation so total 1792 Bytes of I2C SRAM
buffer will be used.
AST2500:
It has 16 Bytes of individual I2C SRAM buffer per each bus and its
range is from 0x1e78a200 to 0x1e78a2df, so it doesn't have 'buffer
page selection' bit field in the Function control register, and
neither 'base address pointer' bit field in the Pool buffer control
register it has. To simplify implementation for supporting both
AST2400 and AST2500, it writes zeros on those register bit fields
but it's okay because it does nothing in AST2500.
This commit fixes all I2C bus nodes to support buffer mode
transfer.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo at linux.intel.com>
---
v1 -> v2:
- Added i2c-global-regs node to provide access of the I2C global regs.
arch/arm/boot/dts/aspeed-g4.dtsi | 61 ++++++++++++++++++++++----------
arch/arm/boot/dts/aspeed-g5.dtsi | 61 ++++++++++++++++++++++----------
2 files changed, 84 insertions(+), 38 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 6011692df15a..33432b6ac87f 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -411,12 +411,21 @@
};
&i2c {
- i2c_ic: interrupt-controller at 0 {
- #interrupt-cells = <1>;
- compatible = "aspeed,ast2400-i2c-ic";
+ i2c_gr: i2c-global-regs at 0 {
+ compatible = "aspeed,ast2400-i2c-gr", "syscon";
reg = <0x0 0x40>;
- interrupts = <12>;
- interrupt-controller;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x40>;
+
+ i2c_ic: interrupt-controller at 0 {
+ #interrupt-cells = <1>;
+ compatible = "aspeed,ast2400-i2c-ic";
+ reg = <0x0 0x4>;
+ interrupts = <12>;
+ interrupt-controller;
+ };
};
i2c0: i2c-bus at 40 {
@@ -424,7 +433,8 @@
#size-cells = <0>;
#interrupt-cells = <1>;
- reg = <0x40 0x40>;
+ reg = <0x40 0x40>, <0x800 0x80>;
+ reg-names = "bus-regs", "buf";
compatible = "aspeed,ast2400-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
@@ -440,7 +450,8 @@
#size-cells = <0>;
#interrupt-cells = <1>;
- reg = <0x80 0x40>;
+ reg = <0x80 0x40>, <0x880 0x80>;
+ reg-names = "bus-regs", "buf";
compatible = "aspeed,ast2400-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
@@ -456,7 +467,8 @@
#size-cells = <0>;
#interrupt-cells = <1>;
- reg = <0xc0 0x40>;
+ reg = <0xc0 0x40>, <0x900 0x80>;
+ reg-names = "bus-regs", "buf";
compatible = "aspeed,ast2400-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
@@ -473,7 +485,8 @@
#size-cells = <0>;
#interrupt-cells = <1>;
- reg = <0x100 0x40>;
+ reg = <0x100 0x40>, <0x980 0x80>;
+ reg-names = "bus-regs", "buf";
compatible = "aspeed,ast2400-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
@@ -490,7 +503,8 @@
#size-cells = <0>;
#interrupt-cells = <1>;
- reg = <0x140 0x40>;
+ reg = <0x140 0x40>, <0xa00 0x80>;
+ reg-names = "bus-regs", "buf";
compatible = "aspeed,ast2400-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
@@ -507,7 +521,8 @@
#size-cells = <0>;
#interrupt-cells = <1>;
- reg = <0x180 0x40>;
+ reg = <0x180 0x40>, <0xa80 0x80>;
+ reg-names = "bus-regs", "buf";
compatible = "aspeed,ast2400-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
@@ -524,7 +539,8 @@
#size-cells = <0>;
#interrupt-cells = <1>;
- reg = <0x1c0 0x40>;
+ reg = <0x1c0 0x40>, <0xb00 0x80>;
+ reg-names = "bus-regs", "buf";
compatible = "aspeed,ast2400-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
@@ -541,7 +557,8 @@
#size-cells = <0>;
#interrupt-cells = <1>;
- reg = <0x300 0x40>;
+ reg = <0x300 0x40>, <0xb80 0x80>;
+ reg-names = "bus-regs", "buf";
compatible = "aspeed,ast2400-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
@@ -558,7 +575,8 @@
#size-cells = <0>;
#interrupt-cells = <1>;
- reg = <0x340 0x40>;
+ reg = <0x340 0x40>, <0xc00 0x80>;
+ reg-names = "bus-regs", "buf";
compatible = "aspeed,ast2400-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
@@ -575,7 +593,8 @@
#size-cells = <0>;
#interrupt-cells = <1>;
- reg = <0x380 0x40>;
+ reg = <0x380 0x40>, <0xc80 0x80>;
+ reg-names = "bus-regs", "buf";
compatible = "aspeed,ast2400-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
@@ -592,7 +611,8 @@
#size-cells = <0>;
#interrupt-cells = <1>;
- reg = <0x3c0 0x40>;
+ reg = <0x3c0 0x40>, <0xd00 0x80>;
+ reg-names = "bus-regs", "buf";
compatible = "aspeed,ast2400-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
@@ -609,7 +629,8 @@
#size-cells = <0>;
#interrupt-cells = <1>;
- reg = <0x400 0x40>;
+ reg = <0x400 0x40>, <0xd80 0x80>;
+ reg-names = "bus-regs", "buf";
compatible = "aspeed,ast2400-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
@@ -626,7 +647,8 @@
#size-cells = <0>;
#interrupt-cells = <1>;
- reg = <0x440 0x40>;
+ reg = <0x440 0x40>, <0xe00 0x80>;
+ reg-names = "bus-regs", "buf";
compatible = "aspeed,ast2400-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
@@ -643,7 +665,8 @@
#size-cells = <0>;
#interrupt-cells = <1>;
- reg = <0x480 0x40>;
+ reg = <0x480 0x40>, <0xe80 0x80>;
+ reg-names = "bus-regs", "buf";
compatible = "aspeed,ast2400-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 383510d47140..c7278966f02b 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -533,12 +533,21 @@
};
&i2c {
- i2c_ic: interrupt-controller at 0 {
- #interrupt-cells = <1>;
- compatible = "aspeed,ast2500-i2c-ic";
+ i2c_gr: i2c-global-regs at 0 {
+ compatible = "aspeed,ast2500-i2c-gr", "syscon";
reg = <0x0 0x40>;
- interrupts = <12>;
- interrupt-controller;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x40>;
+
+ i2c_ic: interrupt-controller at 0 {
+ #interrupt-cells = <1>;
+ compatible = "aspeed,ast2500-i2c-ic";
+ reg = <0x0 0x4>;
+ interrupts = <12>;
+ interrupt-controller;
+ };
};
i2c0: i2c-bus at 40 {
@@ -546,7 +555,8 @@
#size-cells = <0>;
#interrupt-cells = <1>;
- reg = <0x40 0x40>;
+ reg = <0x40 0x40>, <0x200 0x10>;
+ reg-names = "bus-regs", "buf";
compatible = "aspeed,ast2500-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
@@ -562,7 +572,8 @@
#size-cells = <0>;
#interrupt-cells = <1>;
- reg = <0x80 0x40>;
+ reg = <0x80 0x40>, <0x210 0x10>;
+ reg-names = "bus-regs", "buf";
compatible = "aspeed,ast2500-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
@@ -578,7 +589,8 @@
#size-cells = <0>;
#interrupt-cells = <1>;
- reg = <0xc0 0x40>;
+ reg = <0xc0 0x40>, <0x220 0x10>;
+ reg-names = "bus-regs", "buf";
compatible = "aspeed,ast2500-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
@@ -595,7 +607,8 @@
#size-cells = <0>;
#interrupt-cells = <1>;
- reg = <0x100 0x40>;
+ reg = <0x100 0x40>, <0x230 0x10>;
+ reg-names = "bus-regs", "buf";
compatible = "aspeed,ast2500-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
@@ -612,7 +625,8 @@
#size-cells = <0>;
#interrupt-cells = <1>;
- reg = <0x140 0x40>;
+ reg = <0x140 0x40>, <0x240 0x10>;
+ reg-names = "bus-regs", "buf";
compatible = "aspeed,ast2500-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
@@ -629,7 +643,8 @@
#size-cells = <0>;
#interrupt-cells = <1>;
- reg = <0x180 0x40>;
+ reg = <0x180 0x40>, <0x250 0x10>;
+ reg-names = "bus-regs", "buf";
compatible = "aspeed,ast2500-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
@@ -646,7 +661,8 @@
#size-cells = <0>;
#interrupt-cells = <1>;
- reg = <0x1c0 0x40>;
+ reg = <0x1c0 0x40>, <0x260 0x10>;
+ reg-names = "bus-regs", "buf";
compatible = "aspeed,ast2500-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
@@ -663,7 +679,8 @@
#size-cells = <0>;
#interrupt-cells = <1>;
- reg = <0x300 0x40>;
+ reg = <0x300 0x40>, <0x270 0x10>;
+ reg-names = "bus-regs", "buf";
compatible = "aspeed,ast2500-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
@@ -680,7 +697,8 @@
#size-cells = <0>;
#interrupt-cells = <1>;
- reg = <0x340 0x40>;
+ reg = <0x340 0x40>, <0x280 0x10>;
+ reg-names = "bus-regs", "buf";
compatible = "aspeed,ast2500-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
@@ -697,7 +715,8 @@
#size-cells = <0>;
#interrupt-cells = <1>;
- reg = <0x380 0x40>;
+ reg = <0x380 0x40>, <0x290 0x10>;
+ reg-names = "bus-regs", "buf";
compatible = "aspeed,ast2500-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
@@ -714,7 +733,8 @@
#size-cells = <0>;
#interrupt-cells = <1>;
- reg = <0x3c0 0x40>;
+ reg = <0x3c0 0x40>, <0x2a0 0x10>;
+ reg-names = "bus-regs", "buf";
compatible = "aspeed,ast2500-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
@@ -731,7 +751,8 @@
#size-cells = <0>;
#interrupt-cells = <1>;
- reg = <0x400 0x40>;
+ reg = <0x400 0x40>, <0x2b0 0x10>;
+ reg-names = "bus-regs", "buf";
compatible = "aspeed,ast2500-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
@@ -748,7 +769,8 @@
#size-cells = <0>;
#interrupt-cells = <1>;
- reg = <0x440 0x40>;
+ reg = <0x440 0x40>, <0x2c0 0x10>;
+ reg-names = "bus-regs", "buf";
compatible = "aspeed,ast2500-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
@@ -765,7 +787,8 @@
#size-cells = <0>;
#interrupt-cells = <1>;
- reg = <0x480 0x40>;
+ reg = <0x480 0x40>, <0x2d0 0x10>;
+ reg-names = "bus-regs", "buf";
compatible = "aspeed,ast2500-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB>;
resets = <&syscon ASPEED_RESET_I2C>;
--
2.22.0
More information about the openbmc
mailing list