[PATCH v2 1/3] drivers/tty/serial/8250: Make Aspeed VUART SIRQ polarity configurable
Oskar Senft
osk at google.com
Wed Jul 31 11:34:02 AEST 2019
Make the SIRQ polarity for Aspeed AST24xx/25xx VUART configurable via
sysfs. This setting need to be changed on specific host platforms
depending on the selected host interface (LPC / eSPI).
The setting is configurable via sysfs rather than device-tree to stay in
line with other related configurable settings.
On AST2500 the VUART SIRQ polarity can be auto-configured by reading the
LPC/eSPI interface configuration from the HW strap table.
Tested: Verified on TYAN S7106 mainboard.
Signed-off-by: Oskar Senft <osk at google.com>
---
.../ABI/stable/sysfs-driver-aspeed-vuart | 10 ++-
drivers/tty/serial/8250/8250_aspeed_vuart.c | 82 +++++++++++++++++++
drivers/tty/serial/8250/Kconfig | 1 +
3 files changed, 92 insertions(+), 1 deletion(-)
diff --git a/Documentation/ABI/stable/sysfs-driver-aspeed-vuart b/Documentation/ABI/stable/sysfs-driver-aspeed-vuart
index 8062953ce77b..64fad87ad964 100644
--- a/Documentation/ABI/stable/sysfs-driver-aspeed-vuart
+++ b/Documentation/ABI/stable/sysfs-driver-aspeed-vuart
@@ -6,10 +6,18 @@ Description: Configures which IO port the host side of the UART
Users: OpenBMC. Proposed changes should be mailed to
openbmc at lists.ozlabs.org
-What: /sys/bus/platform/drivers/aspeed-vuart*/sirq
+What: /sys/bus/platform/drivers/aspeed-vuart/*/sirq
Date: April 2017
Contact: Jeremy Kerr <jk at ozlabs.org>
Description: Configures which interrupt number the host side of
the UART will appear on the host <-> BMC LPC bus.
Users: OpenBMC. Proposed changes should be mailed to
openbmc at lists.ozlabs.org
+
+What: /sys/bus/platform/drivers/aspeed-vuart/*/sirq_polarity
+Date: July 2019
+Contact: Oskar Senft <osk at google.com>
+Description: Configures the polarity of the serial interrupt to the
+ host via the BMC LPC bus.
+Users: OpenBMC. Proposed changes should be mailed to
+ openbmc at lists.ozlabs.org
diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
index 0438d9a905ce..e0e441c38541 100644
--- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -14,6 +14,8 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/clk.h>
@@ -22,6 +24,7 @@
#define ASPEED_VUART_GCRA 0x20
#define ASPEED_VUART_GCRA_VUART_EN BIT(0)
+#define ASPEED_VUART_GCRA_HOST_SIRQ_POLARITY BIT(1)
#define ASPEED_VUART_GCRA_DISABLE_HOST_TX_DISCARD BIT(5)
#define ASPEED_VUART_GCRB 0x24
#define ASPEED_VUART_GCRB_HOST_SIRQ_MASK GENMASK(7, 4)
@@ -131,8 +134,53 @@ static ssize_t sirq_store(struct device *dev, struct device_attribute *attr,
static DEVICE_ATTR_RW(sirq);
+static ssize_t sirq_polarity_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct aspeed_vuart *vuart = dev_get_drvdata(dev);
+ u8 reg;
+
+ reg = readb(vuart->regs + ASPEED_VUART_GCRA);
+ reg &= ASPEED_VUART_GCRA_HOST_SIRQ_POLARITY;
+
+ return snprintf(buf, PAGE_SIZE - 1, "%u\n", reg ? 1 : 0);
+}
+
+static void aspeed_vuart_set_sirq_polarity(struct aspeed_vuart *vuart,
+ bool polarity)
+{
+ u8 reg = readb(vuart->regs + ASPEED_VUART_GCRA);
+
+ if (polarity)
+ reg |= ASPEED_VUART_GCRA_HOST_SIRQ_POLARITY;
+ else
+ reg &= ~ASPEED_VUART_GCRA_HOST_SIRQ_POLARITY;
+
+ writeb(reg, vuart->regs + ASPEED_VUART_GCRA);
+}
+
+static ssize_t sirq_polarity_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct aspeed_vuart *vuart = dev_get_drvdata(dev);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 0, &val);
+ if (err)
+ return err;
+
+ aspeed_vuart_set_sirq_polarity(vuart, val != 0);
+
+ return count;
+}
+
+static DEVICE_ATTR_RW(sirq_polarity);
+
static struct attribute *aspeed_vuart_attrs[] = {
&dev_attr_sirq.attr,
+ &dev_attr_sirq_polarity.attr,
&dev_attr_lpc_address.attr,
NULL,
};
@@ -302,6 +350,27 @@ static int aspeed_vuart_handle_irq(struct uart_port *port)
return 1;
}
+static void aspeed_vuart_auto_configure_sirq_polarity(
+ struct aspeed_vuart *vuart, struct device_node *syscon_np,
+ u32 reg_offset, u32 reg_mask)
+{
+ struct regmap *regmap;
+ u32 value;
+
+ regmap = syscon_node_to_regmap(syscon_np);
+ if (IS_ERR(regmap)) {
+ dev_warn(vuart->dev,
+ "could not get regmap for espi-enabled\n");
+ return;
+ }
+ if (regmap_read(regmap, reg_offset, &value)) {
+ dev_warn(vuart->dev, "could not read hw strap table\n");
+ return;
+ }
+
+ aspeed_vuart_set_sirq_polarity(vuart, (value & reg_mask) == 0);
+}
+
static int aspeed_vuart_probe(struct platform_device *pdev)
{
struct uart_8250_port port;
@@ -310,6 +379,7 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
struct resource *res;
u32 clk, prop;
int rc;
+ struct of_phandle_args espi_enabled_args;
np = pdev->dev.of_node;
@@ -402,6 +472,18 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
vuart->line = rc;
+ rc = of_parse_phandle_with_fixed_args(
+ np, "espi-enabled", 2, 0, &espi_enabled_args);
+ if (rc < 0) {
+ dev_warn(&pdev->dev, "espi-enabled property not found\n");
+ } else {
+ aspeed_vuart_auto_configure_sirq_polarity(
+ vuart, espi_enabled_args.np,
+ espi_enabled_args.args[0],
+ BIT(espi_enabled_args.args[1]));
+ of_node_put(espi_enabled_args.np);
+ }
+
aspeed_vuart_set_enabled(vuart, true);
aspeed_vuart_set_host_tx_discard(vuart, true);
platform_set_drvdata(pdev, vuart);
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 509f6a3bb9ff..98e25781a293 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -243,6 +243,7 @@ config SERIAL_8250_ASPEED_VUART
tristate "Aspeed Virtual UART"
depends on SERIAL_8250
depends on OF
+ depends on REGMAP && MFD_SYSCON
help
If you want to use the virtual UART (VUART) device on Aspeed
BMC platforms, enable this option. This enables the 16550A-
--
2.22.0.709.g102302147b-goog
More information about the openbmc
mailing list