[PATCH dev-5.17 v1 3/6] ARM: dts: nuvoton: nuvoton-npcm750-runbmc: Add i2c nodes

[Samuel Jiang]

From: Samuel Jiang <Samuel.Jiang at quantatw.com>

update nuvoton-npcm750-runbmc dts i2c nodes which includeing:
1. ADC
2. EEPROM
3. i2c-switch
4. temperature sensor
5. ADM

Signed-off-by: Samuel Jiang <Samuel.Jiang at quantatw.com>
---
 arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts | 232 +++++++++++++++++++
 1 file changed, 232 insertions(+)

diff --git a/arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts b/arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts
index bcd7f1063399..b7d3b4d83f0d 100644
--- a/arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts
+++ b/arch/arm/boot/dts/nuvoton-npcm750-runbmc.dts
@@ -27,6 +27,20 @@
 		udc8 = &udc8;
 		udc9 = &udc9;
 		emmc0 = &sdhci0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
 		spi0 = &spi0;
 		spi1 = &spi1;
 		fiu0 = &fiu0;
@@ -269,6 +283,224 @@
 				};
 			};
 
+			i2c0: i2c at 80000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				bus-frequency = <100000>;
+				status = "disabled";
+			};
+
+			i2c1: i2c at 81000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				bus-frequency = <100000>;
+				status = "okay";
+				i2c-switch at 70 {
+					compatible = "nxp,pca9548";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x70>;
+					i2c-mux-idle-disconnect;
+
+					i2c_slot1a: i2c-bus at 0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+
+					i2c_slot1b: i2c-bus at 1 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <1>;
+					};
+
+					i2c_slot2a: i2c-bus at 2 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <2>;
+					};
+
+					i2c_slot2b: i2c-bus at 3 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <3>;
+					};
+
+					i2c_slot3: i2c-bus at 4 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <4>;
+					};
+
+					i2c_slot4: i2c-bus at 5 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <5>;
+					};
+
+					i2c_slot5: i2c-bus at 6 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <6>;
+					};
+				};
+
+				i2c-switch at 71 {
+					compatible = "nxp,pca9546";
+					reg = <0x71>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					i2c-mux-idle-disconnect;
+
+					i2c_m2_s1: i2c-bus at 0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+
+					i2c_m2_s2: i2c-bus at 1 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <1>;
+					};
+					i2c_m2_s3: i2c-bus at 2 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <2>;
+					};
+
+					i2c_m2_s4: i2c-bus at 3 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <3>;
+					};
+				};
+			};
+
+			i2c2: i2c at 82000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				bus-frequency = <100000>;
+				status = "okay";
+				tmp421 at 4c {
+					compatible = "ti,tmp421";
+					reg = <0x4c>;
+				};
+			};
+
+			i2c3: i2c at 83000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				bus-frequency = <100000>;
+				status = "okay";
+			};
+
+			i2c4: i2c at 84000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				bus-frequency = <100000>;
+				status = "okay";
+				eeprom at 54 {
+					compatible = "atmel,24c64";
+					reg = <0x54>;
+				};
+			};
+
+			i2c5: i2c at 85000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				bus-frequency = <100000>;
+				status = "okay";
+			};
+
+			i2c6: i2c at 86000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				bus-frequency = <100000>;
+				status = "okay";
+			};
+
+			i2c7: i2c at 87000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				bus-frequency = <100000>;
+				status = "okay";
+				tmp421 at 4c {
+					compatible = "ti,tmp421";
+					reg = <0x4c>;
+				};
+
+				adc128d818 at 1d {
+					compatible = "ti,adc128d818";
+					reg = <0x1d>;
+					ti,mode = <1>;
+				};
+			};
+
+			i2c8: i2c at 88000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				bus-frequency = <100000>;
+				status = "okay";
+				adm1278 at 11 {
+					compatible = "adm1278";
+					reg = <0x11>;
+					Rsense = <500>;
+				};
+
+				adm1278 at 12 {
+					compatible = "adm1278";
+					reg = <0x12>;
+					Rsense = <500>;
+				};
+			};
+
+			i2c9: i2c at 89000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				bus-frequency = <100000>;
+				status = "okay";
+			};
+
+			i2c10: i2c at 8a000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				bus-frequency = <100000>;
+				status = "okay";
+			};
+
+			i2c11: i2c at 8b000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				bus-frequency = <100000>;
+				status = "okay";
+			};
+
+			i2c12: i2c at 8c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				bus-frequency = <100000>;
+				status = "okay";
+			};
+
+			i2c13: i2c at 8d000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				bus-frequency = <100000>;
+				status = "okay";
+				tmp75 at 4a {
+					compatible = "ti,tmp75";
+					reg = <0x4a>;
+					status = "okay";
+				};
+				m24128_fru at 51 {
+					compatible = "atmel,24c128";
+					reg = <0x51>;
+					pagesize = <64>;
+					status = "okay";
+				};
+			};
+
 			pwm_fan:pwm-fan-controller at 103000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <   &pwm0_pins &pwm1_pins
-- 
2.20.1