AMI Bios not booting completely

[Oskar Senft]

What really peaks out is that it stops just as it's trying to initialize
the DXE serial driver ... Is it possible that this driver is attempting to
access a resource that's not exposed or not handled through/by OpenBMC?

Oskar.

On Fri, Jan 18, 2019 at 2:33 PM Vijay Khemka <vijaykhemka at fb.com> wrote:

> Team,
>
> I am unable to boot Bios all the way to boot  (grub in our case) prompt.
> I have verified IPMI communication with KCS debug. It does work with our FB
> internal image but not with LF openbmc image. Following is the last log
> lines and it get stuck after that.
>
>
>
> InstallRom...Run-time ROM Size = 8000 Bytes
>
> FetchBbsBootDevices: B3/D0/F0, ClassCode 3
>
> InstallProtocolInterface: OpromStartEnd 0
>
> OnPciIOInstalled
>
> OnPciIOInstalled LocateHandle = Success
>
> OnPciIOInstalled HandleProtocol = Success
>
> OpRomStartEndProtocol located
>
>                PCI OPROM(handle 66307C98, 3/0/0): addr C0000, size 8000
>
> InstallProtocolInterface: EfiDevicePath 65EAE9D8
>
> VESA: fetching the list of VESA modes supported by the controller from
> 3F022
>
> VESA mode 101 (640x480)  skipping as BPP (8) is less than 24...
>
> VESA mode 102 (800x600)  skipping as the mode has not linear frame
> buffer...
>
> VESA mode 103 (800x600)  skipping as BPP (8) is less than 24...
>
> VESA mode 105 (1024x768)  skipping as BPP (8) is less than 24...
>
> VESA mode 110 (640x480)  skipping as BPP (15) is less than 24...
>
> VESA mode 111 (640x480)  skipping as BPP (16) is less than 24...
>
> VESA mode 113 (800x600)  skipping as BPP (15) is less than 24...
>
> VESA mode 114 (800x600)  skipping as BPP (16) is less than 24...
>
> VESA mode 116 (1024x768)  skipping as BPP (15) is less than 24...
>
> VESA mode 117 (1024x768)  skipping as BPP (16) is less than 24...
>
> VESA mode 120 (640x480)  neither EDID nor MODE match is found.
>
> VESA mode 121 (800x600)  MODE match found (0).
>
> ODE match found (2).
>
> VESA mode 122 (1024x768)  neither EDID nor MODE match is found.
>
> VESA mode 130 (320x240)  skipping as BPP (8) is less than 24...
>
> VESA mode 131 (320x240)  skipping as BPP (15) is less than 24...
>
> VESA mode 132 (320x240)  skipping as BPP (16) is less than 24...
>
> VESA mode 133 (320x240)  neither EDID nor MODE match is found.
>
> VESA mode 134 (400x300)  skipping as BPP (8) is less than 24...
>
> VESA mode 135 (400x300)  skipping as BPP (15) is less than 24...
>
> VESA mode 136 (400x300)  skipping as BPP (16) is less than 24...
>
> VESA mode 137 (400x300)  neither EDID nor MODE match is found.
>
> VESA mode 138 (512x384)  skipping as BPP (8) is less than 24...
>
> VESA mode 139 (512x384)  skipping as BPP (15) is less than 24...
>
> VESA mode 13A (512x384)  skipping as BPP (16) is less than 24...
>
> VESA mode 13B (512x384)  neither EDID nor MODE match is found.
>
> Total number of GOP modes: 1
>
> UefiBiosVideo AllocateTheBuffers()
>
> VbeModeNumber: 0x121
>
> BytesPerScanLine: 0xC80
>
> HorizontalResolution: 0x320
>
> VerticalResolution: 0x258
>
> axBytesPerScanLine: 0xC80
>
> axVerticalResolution: 0x258
>
> InstallProtocolInterface: EfiGraphicsOutput 65EABB38[24m
>
> [4mInstallProtocolInterface: EfiEdidDiscovered 65EABB58[24m
>
> [4mInstallProtocolInterface: EfiEdidActive 65EABB68[24m
>
>
>
> [4mOptRomSetup: GOP Protocol Installed, EVENT=0x68A8FB98.[24m
>
> [4mOptRomSetup: ChkVga - VGA Settings: VgaIdx=0x14D; Item=1; Group=2;
> cbMode=1; GopFound=1;[24m
>
> [4mSuccess[24m
>
> [4mAMI Graphic Console
> Driver.Start(6A4C081C)[PciRoot(0x0)/Pci(0x1C,0x4)/Pci(0x0,0x0)/Pci(0x0,0x0)/AcpiAdr(0x80010100)]=InstallProtocolInterface:
> EfiSimpleTextOut 65EAE298[24m
>
> [4mInstallProtocolInterface: AmiTextOut 65EAE399[24m
>
> [4mSuccess[24m
>
> [4mAMI Console Splitter Text Out
> Driver.Start(6A4C80B0)[PciRoot(0x0)/Pci(0x1C,0x4)/Pci(0x0,0x0)/Pci(0x0,0x0)/AcpiAdr(0x80010100)]=[24m
>
> [4mRows = 19  Col = 50    AllDevices = 1 [24m
>
> [4mRows = 19  Col = 50    AllDevices = 0 [24m
>
> [4mRows = 1F  Col = 64    AllDevices = 1 [24m
>
> [4mRows = 1F  Col = 64    AllDevices = 1 [24m
>
> [4mSuccess[24m
>
> [4mBDS.ConnectConOutVariable(6A730CF8)[24m
>
> [4mAMI Serial I/O
> Driver.Start(6A64A87C)[PciRoot(0x0)/Pci(0x1F,0x0)/Serial(0x0);Uart(InstallProtocolInterface:
> EfiSerialIo 65EAB298[24m
>
> [4mInstallProtocolInterface: EfiDevicePath 65C9D818[24m
>
> [4mSuccess[24m
>
> [4mAMI Terminal
> Driver.Start(6A47662C)[PciRoot(0x0)/Pci(0x1F,0x0)/Serial(0x0)/Uart(57600,8,N,1)/UartFlowCtrl(Hardware);VenVt100()]=ACPI:
> SetAcpiTable() Table=0x65C9D2D8; Handle=0x6A47D530; *Handle=0x0[24m
>
> [4mACPI: SetAcpiTable() Exiting... Status = Success[24m
>
> [4mInstallProtocolInterface: EfiDevicePath 68A46D18[24m
>
> [H[2J[61B[H[4mInstallProtocolInterface: EfiSimpleTextIn 68A45018
>
> InstallProtocolInterface: EfiSimpleTextInputEx 68A45030
>
> InstallProtocolInterface: AmiEfiKeycode 68A45060
>
> InstallProtocolInterface: EfiSimpleTextOut 68A45090
>
> Success
>
> AMI Console Splitter Text Out
> Driver.Start(6A4C80B0)[PciRoot(0x0)/Pci(0x1F,0x0)/Serial(0x0)/Uart(57600,8,N,1)/UartFlowCtrl(Hardware)/VenVt100()]=
>
> Rows = 19  Col = 50    AllDevices = 1
>
> [24m[H[2J[7B[H[25;60HSuccess
>
> AMI Console Splitter Text In
> Driver.Start(6A4C84C4)[PciRoot(0x0)/Pci(0x1F,0x0)/Serial(0x0)/Uart(57600,8,N,1)/UartFlowCtrl(Hardware)/VenVt100()]=Success
>
> AMI Serial I/O
> Driver.Start(6A64A87C)[PciRoot(0x0)/Pci(0x1F,0x0)/Serial(0x1);Uart(57600,8,N,1)]=
>
>
>
>
>
> Please throw some light here.
>
>
>
> Regards
>
> -Vijay
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20190118/969b9013/attachment-0001.html>