[PATCH] ARM:dts:aspeed Add Inspur on5263m5 BMC
John Wang
wangzqbj at inspur.com
Thu Jan 17 17:56:31 AEDT 2019
Add initial version of device tree file for on5263m5 ast2500bmc
Signed-off-by: John Wang <wangzqbj at inspur.com>
---
arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts | 146 +++++++++++++++++++++++
1 file changed, 146 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts
new file mode 100644
index 0000000..064ae30
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Inspur Corporation
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "ON5263M5 BMC";
+ compatible = "inspur,on5263m5-bmc", "aspeed,ast2500";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "earlyprintk";
+ };
+
+ memory {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vga_memory: framebuffer at 9f000000 {
+ no-map;
+ reg = <0x9f000000 0x01000000>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ bmc_alive {
+ label = "bmc_alive";
+ gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+ };
+
+};
+
+&fmc {
+ status = "okay";
+ flash at 0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash at 0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "pnor";
+ };
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ use-ncsi;
+};
+
+&mac1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c6 {
+ status = "okay";
+
+ tmp421 at 4e {
+ compatible = "ti,tmp421";
+ reg = <0x4e>;
+ };
+
+ tmp112 at 48 {
+ compatible = "ti,tmp112";
+ reg = <0x48>;
+ };
+
+ eeprom at 54 {
+ compatible = "atmel,24c64";
+ reg = <0x54>;
+ pagesize = <32>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+
+ adm1278 at 11 {
+ compatible = "adi,adm1278";
+ reg = <0x11>;
+ };
+};
+
+&gfx {
+ status = "okay";
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+
+ fan at 0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+ };
+
+ fan at 1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+ };
+};
+
+&adc {
+ status = "okay";
+};
--
2.7.4
More information about the openbmc
mailing list