[RFC qemu legoater/aspeed-3.1 2/4] timer: aspeed: Status register contains reload for stopped timer
Andrew Jeffery
andrew at aj.id.au
Fri Jan 11 14:56:36 AEDT 2019
>From the datasheet:
> This register stores the current status of counter #N. When timer
> enable bit TMC30[N * b] is disabled, the reload register will be
> loaded into this counter. When timer bit TMC30[N * b] is set, the
> counter will start to decrement. CPU can update this register value
> when enable bit is set.
Signed-off-by: Andrew Jeffery <andrew at aj.id.au>
---
hw/timer/aspeed_timer.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/hw/timer/aspeed_timer.c b/hw/timer/aspeed_timer.c
index 54c75bf4f322..6adc14d62034 100644
--- a/hw/timer/aspeed_timer.c
+++ b/hw/timer/aspeed_timer.c
@@ -182,7 +182,11 @@ static uint64_t aspeed_timer_get_value(AspeedTimer *t, int reg)
switch (reg) {
case TIMER_REG_STATUS:
- value = calculate_ticks(t, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL));
+ if (timer_enabled(t)) {
+ value = calculate_ticks(t, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL));
+ } else {
+ value = t->reload;
+ }
break;
case TIMER_REG_RELOAD:
value = t->reload;
--
2.19.1
More information about the openbmc
mailing list