do_cofigure fail

[Patrick Venture]

On Wed, Jan 9, 2019 at 5:46 PM Sheldon 13 <tssheldonpotter at gmail.com> wrote:
>
> I am using openbmc-v2.2 and want to add some new features,just for test. But when I try to add any application, not only sdbus or phosphor-fan-presence, but all the application I tried have this problem.
> Here is my step:
> (1)export TEMPLATECONF=meta-ibm/meta-palmetto/conf
> (2)openbmc-env
> (3)devtool add sdbusplus https://github.com/openbmc/sdbusplus.git
> (4) vim openbmc/build/conf/local.conf
>      add"IMAGE_INSTALL_append = " welcome" "
> (5)bitbake bitbake obmc-phosphor-image
>
> I have change to existing recipes but the problem is as the same.
>
> Benjamin Fair <benjaminfair at google.com> 于2019年1月10日周四 上午2:59写道：
>>
>> On Wed, Jan 9, 2019 at 10:05 AM Patrick Venture <venture at google.com> wrote:
>> >
>> > On Wed, Jan 9, 2019 at 12:16 AM Sheldon 13 <tssheldonpotter at gmail.com> wrote:
>> > >
>> > > After I add a new application (such as sdbus or phosphor-fan-presence) using DEVTOOL, I build it with BITBAKE, but it always get error like this:
>>
>> Why are you adding a new recipe for these applications? You should be
>> able to use the existing recipes that have already been written.

^--- per Benjamin, sdbusplus is already a recipe.  If you want to
develop against it use:

devtool modify -n sdbusplus /workspaces/sdbusplus_wip

s.t. sdbusplus_wip is where you've checked out the code you wish to
modify.  That said, v2.2 of openbmc may be too old to work with HEAD
of sdbusplus.


>>
>> Here's the one for sdbusplus for instance:
>> https://github.com/openbmc/openbmc/blob/master/meta-phosphor/recipes-extended/sdbusplus/sdbusplus_git.bb
>>
>> > > ##########################################################
>> > > NOTE: Executing RunQueue Tasks
>> > > ERROR: sdbusplus-1.0+git999-r0 do_configure: configure failed
>> > > ERROR: sdbusplus-1.0+git999-r0 do_configure: Function failed: do_configure (log file is located at /home/sheldon13/dev/openbmc-2.2/build/tmp/work/armv5e-openbmc-linux-gnueabi/sdbusplus/1.0+git999-r0/temp/log.do_configure.114229)
>> > > ERROR: Logfile of failure stored in: /home/sheldon13/dev/openbmc-2.2/build/tmp/work/armv5e-openbmc-linux-gnueabi/sdbusplus/1.0+git999-r0/temp/log.do_configure.114229
>> > > Log data follows:
>> > > | DEBUG: Executing python function externalsrc_configure_prefunc
>> > > ############################################################
>> > >
>> > >
>> > >
>> > > My recipe file sdbusplus_git.bb was automatically generated by the DEVTOOL command ,it is like this:
>> > > ##################################################################################################################
>> > > # Recipe created by recipetool
>> > > # This is the basis of a recipe and may need further editing in order to be fully functional.
>> > > # (Feel free to remove these comments when editing.)
>> > >
>> > > # WARNING: the following LICENSE and LIC_FILES_CHKSUM values are best guesses - it is
>> > > # your responsibility to verify that the values are complete and correct.
>> > > #
>> > > # The following license files were not able to be identified and are
>> > > # represented as "Unknown" below, you will need to check them yourself:
>> > > #   LICENSE
>> > > LICENSE = "Unknown"
>> > > LIC_FILES_CHKSUM = "file://LICENSE;md5=e3fc50a88d0a364313df4b21ef20c29e"
>> > >
>> > > SRC_URI = "git://github.com/openbmc/sdbusplus.git;protocol=https"
>> > >
>> > > # Modify these as desired
>> > > PV = "1.0+git${SRCPV}"
>> > > SRCREV = "09c981700d7bd98eed54a670e959a424585dcd84"
>> > >
>> > > S = "${WORKDIR}/git"
>> > >
>> > > # NOTE: the following library dependencies are unknown, ignoring: gtest gmock
>> > > #       (this is based on recipes that have previously been built and packaged)
>> > > DEPENDS = "gtest systemd"
>> > >
>> > > # NOTE: if this software is not capable of being built in a separate build directory
>> > > # from the source, you should replace autotools with autotools-brokensep in the
>> > > # inherit line
>> > > inherit pkgconfig pythonnative autotools
>> > >
>> > > # Specify any options you want to pass to the configure script using EXTRA_OECONF:
>> > > EXTRA_OECONF = ""
>> > > ###############################################################################################################
>> > > and I didn't change the recipe and didn't know how to change it. Can you help me build my project?
>> >
>> > Can you provide your full steps to reproduce your workspace, such as,
>> > git clone openbmc, git clone sdbusplus, and so on, as I haven't had
>> > issues recently with devtool.
>>
>> Can you also describe what you're trying to accomplish? Feel free to
>> join the IRC channel #openbmc on freenode.net if that's easier.
>>
>> Benjamin