do_cofigure fail

[Benjamin Fair]

On Wed, Jan 9, 2019 at 10:05 AM Patrick Venture <venture at google.com> wrote:
>
> On Wed, Jan 9, 2019 at 12:16 AM Sheldon 13 <tssheldonpotter at gmail.com> wrote:
> >
> > After I add a new application (such as sdbus or phosphor-fan-presence) using DEVTOOL, I build it with BITBAKE, but it always get error like this:

Why are you adding a new recipe for these applications? You should be
able to use the existing recipes that have already been written.

Here's the one for sdbusplus for instance:
https://github.com/openbmc/openbmc/blob/master/meta-phosphor/recipes-extended/sdbusplus/sdbusplus_git.bb

> > ##########################################################
> > NOTE: Executing RunQueue Tasks
> > ERROR: sdbusplus-1.0+git999-r0 do_configure: configure failed
> > ERROR: sdbusplus-1.0+git999-r0 do_configure: Function failed: do_configure (log file is located at /home/sheldon13/dev/openbmc-2.2/build/tmp/work/armv5e-openbmc-linux-gnueabi/sdbusplus/1.0+git999-r0/temp/log.do_configure.114229)
> > ERROR: Logfile of failure stored in: /home/sheldon13/dev/openbmc-2.2/build/tmp/work/armv5e-openbmc-linux-gnueabi/sdbusplus/1.0+git999-r0/temp/log.do_configure.114229
> > Log data follows:
> > | DEBUG: Executing python function externalsrc_configure_prefunc
> > ############################################################
> >
> >
> >
> > My recipe file sdbusplus_git.bb was automatically generated by the DEVTOOL command ,it is like this:
> > ##################################################################################################################
> > # Recipe created by recipetool
> > # This is the basis of a recipe and may need further editing in order to be fully functional.
> > # (Feel free to remove these comments when editing.)
> >
> > # WARNING: the following LICENSE and LIC_FILES_CHKSUM values are best guesses - it is
> > # your responsibility to verify that the values are complete and correct.
> > #
> > # The following license files were not able to be identified and are
> > # represented as "Unknown" below, you will need to check them yourself:
> > #   LICENSE
> > LICENSE = "Unknown"
> > LIC_FILES_CHKSUM = "file://LICENSE;md5=e3fc50a88d0a364313df4b21ef20c29e"
> >
> > SRC_URI = "git://github.com/openbmc/sdbusplus.git;protocol=https"
> >
> > # Modify these as desired
> > PV = "1.0+git${SRCPV}"
> > SRCREV = "09c981700d7bd98eed54a670e959a424585dcd84"
> >
> > S = "${WORKDIR}/git"
> >
> > # NOTE: the following library dependencies are unknown, ignoring: gtest gmock
> > #       (this is based on recipes that have previously been built and packaged)
> > DEPENDS = "gtest systemd"
> >
> > # NOTE: if this software is not capable of being built in a separate build directory
> > # from the source, you should replace autotools with autotools-brokensep in the
> > # inherit line
> > inherit pkgconfig pythonnative autotools
> >
> > # Specify any options you want to pass to the configure script using EXTRA_OECONF:
> > EXTRA_OECONF = ""
> > ###############################################################################################################
> > and I didn't change the recipe and didn't know how to change it. Can you help me build my project?
>
> Can you provide your full steps to reproduce your workspace, such as,
> git clone openbmc, git clone sdbusplus, and so on, as I haven't had
> issues recently with devtool.

Can you also describe what you're trying to accomplish? Feel free to
join the IRC channel #openbmc on freenode.net if that's easier.

Benjamin