[PATCH v2 0/2] iio: adc: npcm: add NPCM ADC driver
Tomer Maimon
tmaimon77 at gmail.com
Thu Jan 10 03:43:41 AEDT 2019
This patch set adds Analog-to-Digital Converter (ADC) support
for the Nuvoton NPCM Baseboard Management Controller (BMC).
The NPCM ADC is a 10-bit converter for eight channel inputs.
The NPCM ADC driver tested on NPCM750 evaluation board.
Addressed comments from:.
- Peter Meerwald-Stadler: https://www.spinics.net/lists/linux-iio/msg42159.html
- Jonathan Cameron: https://www.spinics.net/lists/linux-iio/msg42183.html
Changes since version 1:
- Add NPCM prefix.
- Remove unnecessary parameter initialization.
- Modify read function to avoid racy condition.
- Reading the reference voltage when needed.
- Modify dt-binding documentation according Jonathan comments.
Tomer Maimon (2):
dt-binding: iio: add NPCM ADC documentation
iio: adc: add NPCM ADC driver
.../bindings/iio/adc/nuvoton,npcm-adc.txt | 35 +++
drivers/iio/adc/Kconfig | 10 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/npcm_adc.c | 338 +++++++++++++++++++++
4 files changed, 384 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt
create mode 100644 drivers/iio/adc/npcm_adc.c
--
2.14.1
More information about the openbmc
mailing list