[PATCH v10 10/12] hwmon: Add PECI cputemp driver

Jae Hyun Yoo jae.hyun.yoo at linux.intel.com
Tue Jan 8 08:41:34 AEDT 2019


This commit adds PECI cputemp hwmon driver.

Cc: Guenter Roeck <linux at roeck-us.net>
Cc: Jean Delvare <jdelvare at suse.com>
Cc: Alan Cox <alan at linux.intel.com>
Cc: Andrew Jeffery <andrew at aj.id.au>
Cc: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
Cc: Arnd Bergmann <arnd at arndb.de>
Cc: Jason M Biils <jason.m.bills at linux.intel.com>
Cc: Joel Stanley <joel at jms.id.au>
Cc: Miguel Ojeda <miguel.ojeda.sandonis at gmail.com>
Cc: Andrew Lunn <andrew at lunn.ch>
Cc: Stef van Os <stef.van.os at prodrive-technologies.com>
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo at linux.intel.com>
Reviewed-by: Haiyue Wang <haiyue.wang at linux.intel.com>
Reviewed-by: James Feist <james.feist at linux.intel.com>
Reviewed-by: Vernon Mauery <vernon.mauery at linux.intel.com>
Acked-by: Guenter Roeck <linux at roeck-us.net>
---
 drivers/hwmon/Kconfig        |  14 ++
 drivers/hwmon/Makefile       |   1 +
 drivers/hwmon/peci-cputemp.c | 394 +++++++++++++++++++++++++++++++++++
 drivers/hwmon/peci-hwmon.h   |  49 +++++
 4 files changed, 458 insertions(+)
 create mode 100644 drivers/hwmon/peci-cputemp.c
 create mode 100644 drivers/hwmon/peci-hwmon.h

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 6f929bfa9fcd..c2eaadcf6525 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1310,6 +1310,20 @@ config SENSORS_PCF8591
 	  These devices are hard to detect and rarely found on mainstream
 	  hardware. If unsure, say N.
 
+config SENSORS_PECI_CPUTEMP
+	tristate "PECI CPU temperature monitoring support"
+	depends on PECI
+	select MFD_INTEL_PECI_CLIENT
+	help
+	  If you say yes here you get support for the generic Intel PECI
+	  cputemp driver which provides Digital Thermal Sensor (DTS) thermal
+	  readings of the CPU package and CPU cores that are accessible using
+	  the PECI Client Command Suite via the processor PECI client.
+	  Check Documentation/hwmon/peci-cputemp for details.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called peci-cputemp.
+
 source "drivers/hwmon/pmbus/Kconfig"
 
 config SENSORS_PWM_FAN
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index f5c7b442e69e..f37117fb9af3 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -141,6 +141,7 @@ obj-$(CONFIG_SENSORS_NTC_THERMISTOR)	+= ntc_thermistor.o
 obj-$(CONFIG_SENSORS_PC87360)	+= pc87360.o
 obj-$(CONFIG_SENSORS_PC87427)	+= pc87427.o
 obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
+obj-$(CONFIG_SENSORS_PECI_CPUTEMP)	+= peci-cputemp.o
 obj-$(CONFIG_SENSORS_POWR1220)  += powr1220.o
 obj-$(CONFIG_SENSORS_PWM_FAN)	+= pwm-fan.o
 obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON)	+= raspberrypi-hwmon.o
diff --git a/drivers/hwmon/peci-cputemp.c b/drivers/hwmon/peci-cputemp.c
new file mode 100644
index 000000000000..63796d883c82
--- /dev/null
+++ b/drivers/hwmon/peci-cputemp.c
@@ -0,0 +1,394 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018-2019 Intel Corporation
+
+#include <linux/hwmon.h>
+#include <linux/jiffies.h>
+#include <linux/mfd/intel-peci-client.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include "peci-hwmon.h"
+
+#define DEFAULT_CHANNEL_NUMS   4
+#define CORETEMP_CHANNEL_NUMS  CORE_NUMS_MAX
+#define CPUTEMP_CHANNEL_NUMS   (DEFAULT_CHANNEL_NUMS + CORETEMP_CHANNEL_NUMS)
+
+/* The RESOLVED_CORES register in PCU of a client CPU */
+#define REG_RESOLVED_CORES_BUS       1
+#define REG_RESOLVED_CORES_DEVICE    30
+#define REG_RESOLVED_CORES_FUNCTION  3
+#define REG_RESOLVED_CORES_OFFSET    0xB4
+
+struct temp_group {
+	struct temp_data die;
+	struct temp_data tcontrol;
+	struct temp_data tthrottle;
+	struct temp_data tjmax;
+	struct temp_data core[CORETEMP_CHANNEL_NUMS];
+};
+
+struct peci_cputemp {
+	struct peci_client_manager *mgr;
+	struct device *dev;
+	char name[PECI_NAME_SIZE];
+	const struct cpu_gen_info *gen_info;
+	struct temp_group temp;
+	u32 core_mask;
+	u32 temp_config[CPUTEMP_CHANNEL_NUMS + 1];
+	uint config_idx;
+	struct hwmon_channel_info temp_info;
+	const struct hwmon_channel_info *info[2];
+	struct hwmon_chip_info chip;
+};
+
+enum cputemp_channels {
+	channel_die,
+	channel_tcontrol,
+	channel_tthrottle,
+	channel_tjmax,
+	channel_core,
+};
+
+static const u32 config_table[DEFAULT_CHANNEL_NUMS + 1] = {
+	/* Die temperature */
+	HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
+	HWMON_T_CRIT_HYST,
+
+	/* Tcontrol temperature */
+	HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_CRIT,
+
+	/* Tthrottle temperature */
+	HWMON_T_LABEL | HWMON_T_INPUT,
+
+	/* Tjmax temperature */
+	HWMON_T_LABEL | HWMON_T_INPUT,
+
+	/* Core temperature - for all core channels */
+	HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
+	HWMON_T_CRIT_HYST,
+};
+
+static const char *cputemp_label[CPUTEMP_CHANNEL_NUMS] = {
+	"Die",
+	"Tcontrol",
+	"Tthrottle",
+	"Tjmax",
+	"Core 0", "Core 1", "Core 2", "Core 3",
+	"Core 4", "Core 5", "Core 6", "Core 7",
+	"Core 8", "Core 9", "Core 10", "Core 11",
+	"Core 12", "Core 13", "Core 14", "Core 15",
+	"Core 16", "Core 17", "Core 18", "Core 19",
+	"Core 20", "Core 21", "Core 22", "Core 23",
+	"Core 24", "Core 25", "Core 26", "Core 27",
+};
+
+static s32 ten_dot_six_to_millidegree(s32 val)
+{
+	return ((val ^ 0x8000) - 0x8000) * 1000 / 64;
+}
+
+static int get_temp_targets(struct peci_cputemp *priv)
+{
+	s32 tthrottle_offset;
+	s32 tcontrol_margin;
+	u8  pkg_cfg[4];
+	int rc;
+
+	/**
+	 * Just use only the tcontrol marker to determine if target values need
+	 * update.
+	 */
+	if (!peci_temp_need_update(&priv->temp.tcontrol))
+		return 0;
+
+	rc = peci_client_read_package_config(priv->mgr,
+					     MBX_INDEX_TEMP_TARGET, 0, pkg_cfg);
+	if (rc)
+		return rc;
+
+	priv->temp.tjmax.value = pkg_cfg[2] * 1000;
+
+	tcontrol_margin = pkg_cfg[1];
+	tcontrol_margin = ((tcontrol_margin ^ 0x80) - 0x80) * 1000;
+	priv->temp.tcontrol.value = priv->temp.tjmax.value - tcontrol_margin;
+
+	tthrottle_offset = (pkg_cfg[3] & 0x2f) * 1000;
+	priv->temp.tthrottle.value = priv->temp.tjmax.value - tthrottle_offset;
+
+	peci_temp_mark_updated(&priv->temp.tcontrol);
+
+	return 0;
+}
+
+static int get_die_temp(struct peci_cputemp *priv)
+{
+	struct peci_get_temp_msg msg;
+	int rc;
+
+	if (!peci_temp_need_update(&priv->temp.die))
+		return 0;
+
+	msg.addr = priv->mgr->client->addr;
+
+	rc = peci_command(priv->mgr->client->adapter, PECI_CMD_GET_TEMP,
+			  &msg);
+	if (rc)
+		return rc;
+
+	/* Note that the tjmax should be available before calling it */
+	priv->temp.die.value = priv->temp.tjmax.value +
+			       (msg.temp_raw * 1000 / 64);
+
+	peci_temp_mark_updated(&priv->temp.die);
+
+	return 0;
+}
+
+static int get_core_temp(struct peci_cputemp *priv, int core_index)
+{
+	s32 core_dts_margin;
+	u8  pkg_cfg[4];
+	int rc;
+
+	if (!peci_temp_need_update(&priv->temp.core[core_index]))
+		return 0;
+
+	rc = peci_client_read_package_config(priv->mgr,
+					     MBX_INDEX_PER_CORE_DTS_TEMP,
+					     core_index, pkg_cfg);
+	if (rc)
+		return rc;
+
+	core_dts_margin = le16_to_cpup((__le16 *)pkg_cfg);
+
+	/**
+	 * Processors return a value of the core DTS reading in 10.6 format
+	 * (10 bits signed decimal, 6 bits fractional).
+	 * Error codes:
+	 *   0x8000: General sensor error
+	 *   0x8001: Reserved
+	 *   0x8002: Underflow on reading value
+	 *   0x8003-0x81ff: Reserved
+	 */
+	if (core_dts_margin >= 0x8000 && core_dts_margin <= 0x81ff)
+		return -EIO;
+
+	core_dts_margin = ten_dot_six_to_millidegree(core_dts_margin);
+
+	/* Note that the tjmax should be available before calling it */
+	priv->temp.core[core_index].value = priv->temp.tjmax.value +
+					    core_dts_margin;
+
+	peci_temp_mark_updated(&priv->temp.core[core_index]);
+
+	return 0;
+}
+
+static int cputemp_read_string(struct device *dev,
+			       enum hwmon_sensor_types type,
+			       u32 attr, int channel, const char **str)
+{
+	if (attr != hwmon_temp_label)
+		return -EOPNOTSUPP;
+
+	*str = cputemp_label[channel];
+	return 0;
+}
+
+static int cputemp_read(struct device *dev,
+			enum hwmon_sensor_types type,
+			u32 attr, int channel, long *val)
+{
+	struct peci_cputemp *priv = dev_get_drvdata(dev);
+	int rc, core_index;
+
+	if (channel >= CPUTEMP_CHANNEL_NUMS ||
+	    !(priv->temp_config[channel] & BIT(attr)))
+		return -EOPNOTSUPP;
+
+	rc = get_temp_targets(priv);
+	if (rc)
+		return rc;
+
+	switch (attr) {
+	case hwmon_temp_input:
+		switch (channel) {
+		case channel_die:
+			rc = get_die_temp(priv);
+			if (rc)
+				break;
+
+			*val = priv->temp.die.value;
+			break;
+		case channel_tcontrol:
+			*val = priv->temp.tcontrol.value;
+			break;
+		case channel_tthrottle:
+			*val = priv->temp.tthrottle.value;
+			break;
+		case channel_tjmax:
+			*val = priv->temp.tjmax.value;
+			break;
+		default:
+			core_index = channel - DEFAULT_CHANNEL_NUMS;
+			rc = get_core_temp(priv, core_index);
+			if (rc)
+				break;
+
+			*val = priv->temp.core[core_index].value;
+			break;
+		}
+		break;
+	case hwmon_temp_max:
+		*val = priv->temp.tcontrol.value;
+		break;
+	case hwmon_temp_crit:
+		*val = priv->temp.tjmax.value;
+		break;
+	case hwmon_temp_crit_hyst:
+		*val = priv->temp.tjmax.value - priv->temp.tcontrol.value;
+		break;
+	default:
+		rc = -EOPNOTSUPP;
+		break;
+	}
+
+	return rc;
+}
+
+static umode_t cputemp_is_visible(const void *data,
+				  enum hwmon_sensor_types type,
+				  u32 attr, int channel)
+{
+	const struct peci_cputemp *priv = data;
+
+	if (priv->temp_config[channel] & BIT(attr))
+		if (channel < DEFAULT_CHANNEL_NUMS ||
+		    (channel >= DEFAULT_CHANNEL_NUMS &&
+		     (priv->core_mask & BIT(channel - DEFAULT_CHANNEL_NUMS))))
+			return 0444;
+
+	return 0;
+}
+
+static const struct hwmon_ops cputemp_ops = {
+	.is_visible = cputemp_is_visible,
+	.read_string = cputemp_read_string,
+	.read = cputemp_read,
+};
+
+static int check_resolved_cores(struct peci_cputemp *priv)
+{
+	struct peci_rd_pci_cfg_local_msg msg;
+	int rc;
+
+	/* Get the RESOLVED_CORES register value */
+	msg.addr = priv->mgr->client->addr;
+	msg.bus = REG_RESOLVED_CORES_BUS;
+	msg.device = REG_RESOLVED_CORES_DEVICE;
+	msg.function = REG_RESOLVED_CORES_FUNCTION;
+	msg.reg = REG_RESOLVED_CORES_OFFSET;
+	msg.rx_len = 4;
+
+	rc = peci_command(priv->mgr->client->adapter,
+			  PECI_CMD_RD_PCI_CFG_LOCAL, &msg);
+	if (rc)
+		return rc;
+
+	priv->core_mask = le32_to_cpup((__le32 *)msg.pci_config);
+	if (!priv->core_mask)
+		return -EAGAIN;
+
+	dev_dbg(priv->dev, "Scanned resolved cores: 0x%x\n", priv->core_mask);
+	return 0;
+}
+
+static int create_core_temp_info(struct peci_cputemp *priv)
+{
+	int rc, i;
+
+	rc = check_resolved_cores(priv);
+	if (rc)
+		return rc;
+
+	for (i = 0; i < priv->gen_info->core_max; i++)
+		if (priv->core_mask & BIT(i))
+			while (i + DEFAULT_CHANNEL_NUMS >= priv->config_idx)
+				priv->temp_config[priv->config_idx++] =
+					config_table[channel_core];
+
+	return 0;
+}
+
+static int peci_cputemp_probe(struct platform_device *pdev)
+{
+	struct peci_client_manager *mgr = dev_get_drvdata(pdev->dev.parent);
+	struct device *dev = &pdev->dev;
+	struct peci_cputemp *priv;
+	struct device *hwmon_dev;
+	int rc;
+
+	if ((mgr->client->adapter->cmd_mask &
+	    (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG))) !=
+	    (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG)))
+		return -ENODEV;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, priv);
+	priv->mgr = mgr;
+	priv->dev = dev;
+	priv->gen_info = mgr->gen_info;
+
+	snprintf(priv->name, PECI_NAME_SIZE, "peci_cputemp.cpu%d",
+		 mgr->client->addr - PECI_BASE_ADDR);
+
+	priv->temp_config[priv->config_idx++] = config_table[channel_die];
+	priv->temp_config[priv->config_idx++] = config_table[channel_tcontrol];
+	priv->temp_config[priv->config_idx++] = config_table[channel_tthrottle];
+	priv->temp_config[priv->config_idx++] = config_table[channel_tjmax];
+
+	rc = create_core_temp_info(priv);
+	if (rc)
+		dev_dbg(dev, "Skipped creating core temp info\n");
+
+	priv->chip.ops = &cputemp_ops;
+	priv->chip.info = priv->info;
+
+	priv->info[0] = &priv->temp_info;
+
+	priv->temp_info.type = hwmon_temp;
+	priv->temp_info.config = priv->temp_config;
+
+	hwmon_dev = devm_hwmon_device_register_with_info(priv->dev,
+							 priv->name,
+							 priv,
+							 &priv->chip,
+							 NULL);
+
+	if (IS_ERR(hwmon_dev))
+		return PTR_ERR(hwmon_dev);
+
+	dev_dbg(dev, "%s: sensor '%s'\n", dev_name(hwmon_dev), priv->name);
+
+	return 0;
+}
+
+static const struct platform_device_id peci_cputemp_ids[] = {
+	{ .name = "peci-cputemp", .driver_data = 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, peci_cputemp_ids);
+
+static struct platform_driver peci_cputemp_driver = {
+	.probe    = peci_cputemp_probe,
+	.id_table = peci_cputemp_ids,
+	.driver   = { .name = "peci-cputemp", },
+};
+module_platform_driver(peci_cputemp_driver);
+
+MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo at linux.intel.com>");
+MODULE_DESCRIPTION("PECI cputemp driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/hwmon/peci-hwmon.h b/drivers/hwmon/peci-hwmon.h
new file mode 100644
index 000000000000..16e3c195094c
--- /dev/null
+++ b/drivers/hwmon/peci-hwmon.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2018-2019 Intel Corporation */
+
+#ifndef __PECI_HWMON_H
+#define __PECI_HWMON_H
+
+#include <linux/peci.h>
+
+#define TEMP_TYPE_PECI   6 /* Sensor type 6: Intel PECI */
+#define UPDATE_INTERVAL  HZ
+
+/**
+ * struct temp_data - PECI temperature information
+ * @valid: flag to indicate the temperature value is valid
+ * @value: temperature value in millidegree Celsius
+ * @last_updated: time of the last update in jiffies
+ */
+struct temp_data {
+	uint  valid;
+	s32   value;
+	ulong last_updated;
+};
+
+/**
+ * peci_temp_need_update - check whether temperature update is needed or not
+ * @temp: pointer to temperature data struct
+ *
+ * Return: true if update is needed, false if not.
+ */
+static inline bool peci_temp_need_update(struct temp_data *temp)
+{
+	if (temp->valid &&
+	    time_before(jiffies, temp->last_updated + UPDATE_INTERVAL))
+		return false;
+
+	return true;
+}
+
+/**
+ * peci_temp_mark_updated - mark the temperature is updated
+ * @temp: pointer to temperature data struct
+ */
+static inline void peci_temp_mark_updated(struct temp_data *temp)
+{
+	temp->valid = 1;
+	temp->last_updated = jiffies;
+}
+
+#endif /* __PECI_HWMON_H */
-- 
2.20.1



More information about the openbmc mailing list