[PATCH 4/4] pmbus (dps650ab): add power supply driver

[Guenter Roeck]

On 1/4/19 1:05 AM, Xiaoting Liu wrote:
> The Delta dps650ab provides main power and standby power to server.
> dps650ab can be detected by MFR_ID and MFR_MODEL referring to
> manufacturer's feedback. This patch adds driver to moniter power
> supply status.
> 
> Signed-off-by: Xiaoting Liu <xiaoting.liu at hxt-semitech.com>
> ---
>   drivers/hwmon/pmbus/Kconfig    |  10 +++++
>   drivers/hwmon/pmbus/Makefile   |   1 +
>   drivers/hwmon/pmbus/dps650ab.c | 100 +++++++++++++++++++++++++++++++++++++++++
>   drivers/hwmon/pmbus/pmbus.c    |   3 ++
>   4 files changed, 114 insertions(+)
> 
> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> index 629cb45f8557..de4638396592 100644
> --- a/drivers/hwmon/pmbus/Kconfig
> +++ b/drivers/hwmon/pmbus/Kconfig
> @@ -184,4 +184,14 @@ config SENSORS_ZL6100
>            This driver can also be built as a module. If so, the module will
>            be called zl6100.
> 
> +config SENSORS_DPS650AB
> +       tristate "Delta DPS650AB"
> +       default n
> +       help
> +         If you say yes here you get hardware monitoring support for the
> +         Delta DPS650AB controller.
> +
> +         This driver can also be built as a module. If so, the module will
> +         be called dps650ab.
> +
>   endif # PMBUS
> diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
> index ea0e39518c21..414818230a26 100644
> --- a/drivers/hwmon/pmbus/Makefile
> +++ b/drivers/hwmon/pmbus/Makefile
> @@ -21,3 +21,4 @@ obj-$(CONFIG_SENSORS_TPS53679)        += tps53679.o
>   obj-$(CONFIG_SENSORS_UCD9000)  += ucd9000.o
>   obj-$(CONFIG_SENSORS_UCD9200)  += ucd9200.o
>   obj-$(CONFIG_SENSORS_ZL6100)   += zl6100.o
> +obj-$(CONFIG_SENSORS_DPS650AB) += dps650ab.o
> diff --git a/drivers/hwmon/pmbus/dps650ab.c b/drivers/hwmon/pmbus/dps650ab.c
> new file mode 100644
> index 000000000000..3c300e621f5a
> --- /dev/null
> +++ b/drivers/hwmon/pmbus/dps650ab.c
> @@ -0,0 +1,100 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Hardware monitoring driver for DELTA DPS650AB
> + *
> + * Copyright (c) 2018 Huaxintong Semiconductor Technology Co., Ltd.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include "pmbus.h"
> +
> +#define DPS650AB_MFR_ID                        "DELTA"
> +#define DPS650AB_MFR_MODEL             "DPS-650AB-16 A"
> +
> +static int dps650ab_probe(struct i2c_client *client,
> +                        const struct i2c_device_id *id)
> +{
> +       struct pmbus_driver_info *info;
> +       u8 buf[I2C_SMBUS_BLOCK_MAX];
> +       int ret;
> +
> +       memset(buf, 0, I2C_SMBUS_BLOCK_MAX);
> +

I don't think this is needed.

> +       if (!i2c_check_functionality(client->adapter,
> +                                    I2C_FUNC_SMBUS_READ_BYTE_DATA
> +                               | I2C_FUNC_SMBUS_READ_WORD_DATA
> +                               | I2C_FUNC_SMBUS_READ_BLOCK_DATA))
> +               return -ENODEV;
> +
> +       ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf);
> +       if (ret < 0) {
> +               dev_err(&client->dev, "Failed to read PMBUS_MFR_ID\n");
> +               return ret;
> +       }
> +
> +       if (strncmp(buf, DPS650AB_MFR_ID, strlen(DPS650AB_MFR_ID))) {

It might make sense to verify the length of the returned string as well,
unless strings such as "DELTAX" are accepted on purpose. But even if
that is the case I would prefer an added check of "ret < strlen(DPS650AB_MFR_ID)"
over the memset() above....

> +               dev_err(&client->dev, "DPS650AB_MFR_ID unrecognised\n");
> +               return -ENODEV;
> +       }
> +
> +       ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf);
> +       if (ret < 0) {
> +               dev_err(&client->dev, "Failed to read PMBUS_MFR_MODEL\n");
> +               return ret;
> +       }
> +
> +       if (strncmp(buf, DPS650AB_MFR_MODEL, strlen(DPS650AB_MFR_MODEL))) {

... to ensure that nothing bad slips through here. As currently written, the code
accepts a MFR_ID of "DELTA50AB-16 A" combined with a MFR_MODEL "DPS-6" as valid.

> +               dev_err(&client->dev, "DPS650AB_MFR_MODEL unrecognised\n");

It would be a nice touch to actually list the unrecognized model. Otherwise
the message is quite useless. Same for MFR_ID.

> +               return -ENODEV;
> +       }
> +
> +       info = devm_kzalloc(&client->dev, sizeof(*info), GFP_KERNEL);
> +       if (!info)
> +               return -ENOMEM;
> +
> +       info->pages = 1;
> +       info->format[PSC_VOLTAGE_IN] = linear;
> +       info->format[PSC_VOLTAGE_OUT] = linear;
> +       info->format[PSC_CURRENT_IN] = linear;
> +       info->format[PSC_CURRENT_OUT] = linear;
> +       info->format[PSC_POWER] = linear;
> +       info->format[PSC_TEMPERATURE] = linear;
> +
> +       info->func[0] = PMBUS_HAVE_VIN
> +               | PMBUS_HAVE_IIN | PMBUS_HAVE_PIN
> +               | PMBUS_HAVE_STATUS_INPUT
> +               | PMBUS_HAVE_POUT | PMBUS_HAVE_FAN12
> +               | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
> +               | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
> +               | PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2
> +               | PMBUS_HAVE_STATUS_TEMP;
> +       info->func[1] = info->func[0];
> +
> +       return pmbus_do_probe(client, id, info);
> +}
> +
> +static const struct i2c_device_id dps650ab_id[] = {
> +       {"dps650ab", 1},
> +       {}
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, dps650ab_id);
> +
> +static struct i2c_driver dps650ab_driver = {
> +       .driver = {
> +               .name   = "dps650ab",
> +       },
> +       .probe          = dps650ab_probe,
> +       .remove         = pmbus_do_remove,
> +       .id_table       = dps650ab_id,
> +};
> +
> +module_i2c_driver(dps650ab_driver);
> +
> +MODULE_AUTHOR("Liuxiaoting <xiaoting.liu at hxt-semitech.com");
> +MODULE_DESCRIPTION("PMBus driver for DPS650AB");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/hwmon/pmbus/pmbus.c b/drivers/hwmon/pmbus/pmbus.c
> index aa4cf9636e99..930e8a3e2366 100644
> --- a/drivers/hwmon/pmbus/pmbus.c
> +++ b/drivers/hwmon/pmbus/pmbus.c
> @@ -204,6 +204,8 @@ static int pmbus_probe(struct i2c_client *client,
>   static const struct pmbus_device_info sgd009_pmbus_info = {
>                                  1, PMBUS_SKIP_STATUS_CHECK};
>   static const struct pmbus_device_info pmbus_info = {0, 0};
> +static const struct pmbus_device_info dps650ab_pmbus_info = {
> +                               1, PMBUS_SKIP_STATUS_CHECK};

Something is conceptually wrong here. Either this change or a new driver,
but not both.

>   /*
>    * Use driver_data to set the number of pages supported by the chip.
>    */
> @@ -227,6 +229,7 @@ static int pmbus_probe(struct i2c_client *client,
>          {"tps544c20", (kernel_ulong_t)&default_pmbus_info},
>          {"tps544c25", (kernel_ulong_t)&default_pmbus_info},
>          {"udt020", (kernel_ulong_t)&default_pmbus_info},
> +       {"dps650ab", (kernel_ulong_t)&dps650ab_pmbus_info},

Also, FWIW, this should be kept in alphabetic order.

>          {}
>   };
> 
> --
> 1.8.3.1
> 
> 
> 
> 
> This email is intended only for the named addressee. It may contain information that is confidential/private, legally privileged, or copyright-protected, and you should handle it accordingly. If you are not the intended recipient, you do not have legal rights to retain, copy, or distribute this email or its contents, and should promptly delete the email and all electronic copies in your system; do not retain copies in any media. If you have received this email in error, please notify the sender promptly. Thank you.
> 
> 
>