Building intel s2600wf image

[Wim Vervoorn]

Hello James,

I got the tree building now.

I have been performing some tests as well. One thing that popped up immediately is that there are no devices created for the kcs interface while the service for this is started.

I noticed that the facebook-tiogapass.dts has the items for kcs2 and 3 included while the s2600wf.dts doesn't assign addresses for these devices (leaving the kcs_addr at 0 causing the driver not to load).

I this intentional and do start the driver in another way or should I change the dts?

Best regards,

Wim Vervoorn


Message: 4
Date: Thu, 14 Feb 2019 16:01:57 -0800
From: James Feist <james.feist at linux.intel.com>
To: openbmc at lists.ozlabs.org
Subject: Re: Building intel s2600wf image
Message-ID: <0af603f9-33e6-0dcb-7e9c-2cfa13cc2a02 at linux.intel.com>
Content-Type: text/plain; charset=utf-8; format=flowed

On 2/14/19 3:49 PM, Andrew Jeffery wrote:
> Hi Wim,
> 
> On Fri, 15 Feb 2019, at 02:51, Wim Vervoorn wrote:
>> Hello,
>>
>> We are trying to build the Intel s2600wf image using the latest 
>> OpenBMC tree. If we do that we are running into build errors.
>>
>> Before digging into this can you tell me which commit of the tree can 
>> be used to build an image for  this device without errors. This 
>> allows us to have a stable version for reference.

I tried to build today with latest trunk and there were some issues, I fixed them all today but all the bumps have to go through first. 
Specifically this one: 
https://gerrit.openbmc-project.xyz/#/c/openbmc/meta-intel/+/18410/

Then it needs to get synced into openbmc-openbmc, or you can checkout the patch with the above version of meta-phosphor and it should build.

Thanks

-James


End of openbmc Digest, Vol 42, Issue 36
***************************************