[PATCH v11 07/14] dt-bindings: peci: add NPCM PECI documentation

[Rob Herring]

On Wed, Dec 11, 2019 at 11:46:17AM -0800, Jae Hyun Yoo wrote:
> From: Tomer Maimon <tmaimon77 at gmail.com>
> 
> Added device tree binding documentation for Nuvoton BMC
> NPCM Platform Environment Control Interface(PECI).
> 
> Signed-off-by: Tomer Maimon <tmaimon77 at gmail.com>
> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo at linux.intel.com>
> ---
> Changes since v10:
> - Newly added in v11.
> 
>  .../devicetree/bindings/peci/peci-npcm.yaml   | 102 ++++++++++++++++++
>  1 file changed, 102 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/peci/peci-npcm.yaml
> 
> diff --git a/Documentation/devicetree/bindings/peci/peci-npcm.yaml b/Documentation/devicetree/bindings/peci/peci-npcm.yaml
> new file mode 100644
> index 000000000000..bcd5626e68e7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/peci/peci-npcm.yaml
> @@ -0,0 +1,102 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/peci/peci-npcm.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Nuvoton NPCM PECI Bus Device Tree Bindings
> +
> +maintainers:
> +  - Tomer Maimon <tmaimon77 at gmail.com>
> +
> +properties:
> +  compatible:
> +    const: nuvoton,npcm750-peci # for the NPCM7XX BMC.
> +
> +  reg:
> +    maxItems: 1
> +
> +  "#address-cells":
> +    # Required to define a client address.
> +    const: 1
> +
> +  "#size-cells":
> +    # Required to define a client address.
> +    const: 0
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    # PECI reference clock.
> +    maxItems: 1
> +
> +  cmd-timeout-ms:
> +    # Command timeout in units of ms.
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32

You can drop this as standard units already have a type.

> +      - minimum: 1
> +        maximum: 60000
> +        default: 1000
> +
> +  pull-down:
> +    description: |
> +      Defines the PECI I/O internal pull down operation.
> +        0: pull down always enable
> +        1: pull down only during transactions.
> +        2: pull down always disable.
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32
> +      - minimum: 0
> +        maximum: 2
> +        default: 0
> +
> +  host-neg-bit-rate:
> +    description: |
> +      Define host negotiation bit rate divider.
> +      the host negotiation bit rate calculate with formula:
> +      clock frequency[Hz] / [4 x {host-neg-bit-rate + 1}]
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32
> +      - minimum: 7
> +        maximum: 31
> +        default: 15
> +
> +  high-volt-range:
> +    description: |
> +      Adapts PECI I/O interface to voltage range.
> +        0: PECI I/O interface voltage range of 0.8-1.06V (default)
> +        1: PECI I/O interface voltage range of 0.95-1.26V
> +    type: boolean

These last 4 properties are vendor specific or PECI common. For the 
former, needs a vendor prefix. For the latter, needs to be moved to 
common location.

> +
> +required:
> +  - compatible
> +  - reg
> +  - "#address-cells"
> +  - "#size-cells"
> +  - interrupts
> +  - clocks
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
> +    peci: bus at 100000 {
> +        compatible = "simple-bus";
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +        ranges = <0x0 0x100000 0x200>;
> +
> +        peci0: peci-bus at 0 {
> +            compatible = "nuvoton,npcm750-peci";
> +            reg = <0x0 0x200>;
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +            interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> +            clocks = <&clk NPCM7XX_CLK_APB3>;
> +            cmd-timeout-ms = <1000>;
> +            pull-down = <0>;
> +            host-neg-bit-rate = <15>;
> +        };
> +    };
> +...
> -- 
> 2.17.1
>