[PATCH dev-5.4 10/14] dt-bindings: mfd: Add Intel PECI client bindings document

[Jae Hyun Yoo]

This commit adds Intel PECI client bindings document.

Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo at linux.intel.com>
---
Changes since v11:
- None

Changes since v10:
- Changed documents format to DT schema format so I dropped all review tags.
  Please review it again.

 .../bindings/mfd/intel,peci-client.yaml       | 67 +++++++++++++++++++
 1 file changed, 67 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/intel,peci-client.yaml

diff --git a/Documentation/devicetree/bindings/mfd/intel,peci-client.yaml b/Documentation/devicetree/bindings/mfd/intel,peci-client.yaml
new file mode 100644
index 000000000000..7baddce0a92c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/intel,peci-client.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/intel,peci-client.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel PECI Client Device Tree Bindings
+
+maintainers:
+  - Jae Hyun Yoo <jae.hyun.yoo at linux.intel.com>
+
+description: |
+  PECI (Platform Environment Control Interface) is a one-wire bus interface
+  that provides a communication channel from PECI clients in Intel processors
+  and chipset components to external monitoring or control devices. PECI is
+  designed to support the following sideband functions:
+  - Processor and DRAM thermal management
+  - Platform Manageability
+  - Processor Interface Tuning and Diagnostics
+  - Failure Analysis
+
+properties:
+  compatible:
+    const: intel,peci-client
+
+  reg:
+    description: |
+      Address of a client CPU. According to the PECI specification, client
+      addresses start from 0x30.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/ast2600-clock.h>
+    peci: bus at 1e78b000 {
+        compatible = "simple-bus";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x1e78b000 0x60>;
+
+        peci0: peci-bus at 0 {
+            compatible = "aspeed,ast2600-peci";
+            reg = <0x0 0x100>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&syscon ASPEED_CLK_GATE_REF0CLK>;
+            resets = <&syscon ASPEED_RESET_PECI>;
+            clock-frequency = <24000000>;
+
+            peci-client at 30 {
+                compatible = "intel,peci-client";
+                reg = <0x30>;
+            };
+
+            peci-client at 31 {
+                compatible = "intel,peci-client";
+                reg = <0x31>;
+            };
+        };
+    };
+...
-- 
2.17.1