Enable KCS interface in zaius

[Yong Li]

It seems that the kernel needs to enable KCS, and disable BT. 
CONFIG_ASPEED_KCS_IPMI_BMC=y

Suggest to check on this: https://github.com/Intel-BMC/openbmc

Thanks,
Yong
-----Original Message-----
From: openbmc <openbmc-bounces+yong.b.li=linux.intel.com at lists.ozlabs.org>
On Behalf Of Andrew Jeffery
Sent: Friday, August 30, 2019 12:42 PM
To: AKASH G J <akashgj91 at gmail.com>; openbmc at lists.ozlabs.org
Subject: Re: Enable KCS interface in zaius



On Thu, 29 Aug 2019, at 09:05, AKASH G J wrote:
> Hi all,
> 
> I am using server platform with Intel processor and Aspeed AST-2500 
> BMC. OpenBMC firmware with zaius configuration is used for BMC.
> 

Zaius is an OpenPOWER platform (and our OpenPOWER platforms use the BT
interface rather than KCS). You're using an Intel-based processor for the
host, so perhaps it's better to start with an x86-based platform such as the
s2600wf. This should already have KCS IPMI enabled for you.

Andrew