chassis power status seems to not be changed when type command to shutdown OS

[Oskar Senft]

There's also quite a bit of infrastructure on the OpenBMC side that needs
to be running to be able for the BMC to actually power on / off the host.

Can you power-on / off the host using "ipmitool power on" / "off" from the
BMC? If that works, then the host should be able to do the same.

Oskar.

On Thu, Aug 22, 2019 at 11:47 AM Andrew Geissler <geissonator at gmail.com>
wrote:

> On Thu, Aug 22, 2019 at 5:01 AM Andrew MS1 Peng <pengms1 at lenovo.com>
> wrote:
> >
> > Hi Team,
> >
> > When I executed command "poweroff" or "shutdown -h" in Host OS, the
> chassis power status seems to not be changed. Is there any package could
> support update power status for this situation?
>
> Sounds like your host is not sending the inband IPMI message to
> the BMC to turn off the chassis once it completes the shutdown?
>
> > Thanks,
> >
> > Andrew
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20190828/628d9ae7/attachment.htm>