[PATCH v5 2/2] hwmon: pmbus: Add Inspur Power System power supply driver

Guenter Roeck linux at roeck-us.net
Sat Aug 17 02:12:27 AEST 2019


On Fri, Aug 16, 2019 at 04:01:05PM +0000, Vijay Khemka wrote:
> 
> 
> On 8/16/19, 3:20 AM, "openbmc on behalf of John Wang" <openbmc-bounces+vijaykhemka=fb.com at lists.ozlabs.org on behalf of wangzqbj at inspur.com> wrote:
> 
>     Add the driver to monitor Inspur Power System power supplies
>     with hwmon over pmbus.
>     
>     This driver adds sysfs attributes for additional power supply data,
>     including vendor, model, part_number, serial number,
>     firmware revision, hardware revision, and psu mode(active/standby).
>     
>     Signed-off-by: John Wang <wangzqbj at inspur.com>
>     ---
>     v5:
>         - Align sysfs attrs description in inspur-ipsps1.rst
>           (Use tab instead of space to sperate names and values)
>     v4:
>         - Remove the additional tabs in the Makefile
>         - Rebased on 5.3-rc4, not 5.2
>     v3:
>         - Sort kconfig/makefile entries alphabetically
>         - Remove unnecessary initialization
>         - Use ATTRIBUTE_GROUPS instead of expanding directly
>         - Use memscan to avoid reimplementation
>     v2:
>         - Fix typos in commit message
>         - Invert Christmas tree
>         - Configure device with sysfs attrs, not debugfs entries
>         - Fix errno in fw_version_read, ENODATA to EPROTO
>         - Change the print format of fw-version
>         - Use sysfs_streq instead of strcmp("xxx" "\n", "xxx")
>         - Document sysfs attributes
>     ---
>      Documentation/hwmon/inspur-ipsps1.rst |  79 +++++++++
>      drivers/hwmon/pmbus/Kconfig           |   9 +
>      drivers/hwmon/pmbus/Makefile          |   1 +
>      drivers/hwmon/pmbus/inspur-ipsps.c    | 226 ++++++++++++++++++++++++++
>      4 files changed, 315 insertions(+)
>      create mode 100644 Documentation/hwmon/inspur-ipsps1.rst
>      create mode 100644 drivers/hwmon/pmbus/inspur-ipsps.c
>     
>     diff --git a/Documentation/hwmon/inspur-ipsps1.rst b/Documentation/hwmon/inspur-ipsps1.rst
>     new file mode 100644
>     index 000000000000..2b871ae3448f
>     --- /dev/null
>     +++ b/Documentation/hwmon/inspur-ipsps1.rst
>     @@ -0,0 +1,79 @@
>     +Kernel driver inspur-ipsps1
>     +=======================
>     +
>     +Supported chips:
>     +
>     +  * Inspur Power System power supply unit
>     +
>     +Author: John Wang <wangzqbj at inspur.com>
>     +
>     +Description
>     +-----------
>     +
>     +This driver supports Inspur Power System power supplies. This driver
>     +is a client to the core PMBus driver.
>     +
>     +Usage Notes
>     +-----------
>     +
>     +This driver does not auto-detect devices. You will have to instantiate the
>     +devices explicitly. Please see Documentation/i2c/instantiating-devices for
>     +details.
>     +
>     +Sysfs entries
>     +-------------
>     +
>     +The following attributes are supported:
>     +
>     +======================= ======================================================
>     +curr1_input		Measured input current
>     +curr1_label		"iin"
>     +curr1_max		Maximum current
>     +curr1_max_alarm		Current high alarm
>     +curr2_input		Measured output current in mA.
>     +curr2_label		"iout1"
>     +curr2_crit		Critical maximum current
>     +curr2_crit_alarm	Current critical high alarm
>     +curr2_max		Maximum current
>     +curr2_max_alarm		Current high alarm
>     +
>     +fan1_alarm		Fan 1 warning.
>     +fan1_fault		Fan 1 fault.
>     +fan1_input		Fan 1 speed in RPM.
>     +
>     +in1_alarm		Input voltage under-voltage alarm.
>     +in1_input		Measured input voltage in mV.
>     +in1_label		"vin"
>     +in2_input		Measured output voltage in mV.
>     +in2_label		"vout1"
>     +in2_lcrit		Critical minimum output voltage
>     +in2_lcrit_alarm		Output voltage critical low alarm
>     +in2_max			Maximum output voltage
>     +in2_max_alarm		Output voltage high alarm
>     +in2_min			Minimum output voltage
>     +in2_min_alarm		Output voltage low alarm
>     +
>     +power1_alarm		Input fault or alarm.
>     +power1_input		Measured input power in uW.
>     +power1_label		"pin"
>     +power1_max		Input power limit
>     +power2_max_alarm	Output power high alarm
>     +power2_max		Output power limit
>     +power2_input		Measured output power in uW.
>     +power2_label		"pout"
>     +
>     +temp[1-3]_input		Measured temperature
>     +temp[1-2]_max		Maximum temperature
>     +temp[1-3]_max_alarm	Temperature high alarm
>     +
>     +vendor			Manufacturer name
>     +model			Product model
>     +part_number		Product part number
>     +serial_number		Product serial number
>     +fw_version		Firmware version
>     +hw_version		Hardware version
>     +mode			Work mode. Can be set to active or
>     +			standby, when set to standby, PSU will
>     +			automatically switch between standby
>     +			and redundancy mode.
> I don't think it is aligned yet. Please use space only instead of tabs.
> 

First, it is aligned. It just appears unaligned in the patch because
'+' at the beginning of the lins shifts the output. We want the result
to be aligned, not the patch file.

Second, let's use tabs like every other hwmon documentation file. I don't
see the point of using spaces just to make the patch file appear aligned.

Unless there is serious feedback, I am going to apply this patch to
hwmon-next.

Guenter

>     +======================= ======================================================
>     diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
>     index b6588483fae1..d62d69bb7e49 100644
>     --- a/drivers/hwmon/pmbus/Kconfig
>     +++ b/drivers/hwmon/pmbus/Kconfig
>     @@ -46,6 +46,15 @@ config SENSORS_IBM_CFFPS
>      	  This driver can also be built as a module. If so, the module will
>      	  be called ibm-cffps.
>      
>     +config SENSORS_INSPUR_IPSPS
>     +	tristate "INSPUR Power System Power Supply"
>     +	help
>     +	  If you say yes here you get hardware monitoring support for the INSPUR
>     +	  Power System power supply.
>     +
>     +	  This driver can also be built as a module. If so, the module will
>     +	  be called inspur-ipsps.
>     +
>      config SENSORS_IR35221
>      	tristate "Infineon IR35221"
>      	help
>     diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
>     index c950ea9a5d00..03bacfcfd660 100644
>     --- a/drivers/hwmon/pmbus/Makefile
>     +++ b/drivers/hwmon/pmbus/Makefile
>     @@ -7,6 +7,7 @@ obj-$(CONFIG_PMBUS)		+= pmbus_core.o
>      obj-$(CONFIG_SENSORS_PMBUS)	+= pmbus.o
>      obj-$(CONFIG_SENSORS_ADM1275)	+= adm1275.o
>      obj-$(CONFIG_SENSORS_IBM_CFFPS)	+= ibm-cffps.o
>     +obj-$(CONFIG_SENSORS_INSPUR_IPSPS) += inspur-ipsps.o
>      obj-$(CONFIG_SENSORS_IR35221)	+= ir35221.o
>      obj-$(CONFIG_SENSORS_IR38064)	+= ir38064.o
>      obj-$(CONFIG_SENSORS_IRPS5401)	+= irps5401.o
>     diff --git a/drivers/hwmon/pmbus/inspur-ipsps.c b/drivers/hwmon/pmbus/inspur-ipsps.c
>     new file mode 100644
>     index 000000000000..fa981b881a60
>     --- /dev/null
>     +++ b/drivers/hwmon/pmbus/inspur-ipsps.c
>     @@ -0,0 +1,226 @@
>     +// SPDX-License-Identifier: GPL-2.0-or-later
>     +/*
>     + * Copyright 2019 Inspur Corp.
>     + */
>     +
>     +#include <linux/debugfs.h>
>     +#include <linux/device.h>
>     +#include <linux/fs.h>
>     +#include <linux/i2c.h>
>     +#include <linux/module.h>
>     +#include <linux/pmbus.h>
>     +#include <linux/hwmon-sysfs.h>
>     +
>     +#include "pmbus.h"
>     +
>     +#define IPSPS_REG_VENDOR_ID	0x99
>     +#define IPSPS_REG_MODEL		0x9A
>     +#define IPSPS_REG_FW_VERSION	0x9B
>     +#define IPSPS_REG_PN		0x9C
>     +#define IPSPS_REG_SN		0x9E
>     +#define IPSPS_REG_HW_VERSION	0xB0
>     +#define IPSPS_REG_MODE		0xFC
>     +
>     +#define MODE_ACTIVE		0x55
>     +#define MODE_STANDBY		0x0E
>     +#define MODE_REDUNDANCY		0x00
>     +
>     +#define MODE_ACTIVE_STRING		"active"
>     +#define MODE_STANDBY_STRING		"standby"
>     +#define MODE_REDUNDANCY_STRING		"redundancy"
>     +
>     +enum ipsps_index {
>     +	vendor,
>     +	model,
>     +	fw_version,
>     +	part_number,
>     +	serial_number,
>     +	hw_version,
>     +	mode,
>     +	num_regs,
>     +};
>     +
>     +static const u8 ipsps_regs[num_regs] = {
>     +	[vendor] = IPSPS_REG_VENDOR_ID,
>     +	[model] = IPSPS_REG_MODEL,
>     +	[fw_version] = IPSPS_REG_FW_VERSION,
>     +	[part_number] = IPSPS_REG_PN,
>     +	[serial_number] = IPSPS_REG_SN,
>     +	[hw_version] = IPSPS_REG_HW_VERSION,
>     +	[mode] = IPSPS_REG_MODE,
>     +};
>     +
>     +static ssize_t ipsps_string_show(struct device *dev,
>     +				 struct device_attribute *devattr,
>     +				 char *buf)
>     +{
>     +	u8 reg;
>     +	int rc;
>     +	char *p;
>     +	char data[I2C_SMBUS_BLOCK_MAX + 1];
>     +	struct i2c_client *client = to_i2c_client(dev->parent);
>     +	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
>     +
>     +	reg = ipsps_regs[attr->index];
>     +	rc = i2c_smbus_read_block_data(client, reg, data);
>     +	if (rc < 0)
>     +		return rc;
>     +
>     +	/* filled with printable characters, ending with # */
>     +	p = memscan(data, '#', rc);
>     +	*p = '\0';
>     +
>     +	return snprintf(buf, PAGE_SIZE, "%s\n", data);
>     +}
>     +
>     +static ssize_t ipsps_fw_version_show(struct device *dev,
>     +				     struct device_attribute *devattr,
>     +				     char *buf)
>     +{
>     +	u8 reg;
>     +	int rc;
>     +	u8 data[I2C_SMBUS_BLOCK_MAX] = { 0 };
>     +	struct i2c_client *client = to_i2c_client(dev->parent);
>     +	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
>     +
>     +	reg = ipsps_regs[attr->index];
>     +	rc = i2c_smbus_read_block_data(client, reg, data);
>     +	if (rc < 0)
>     +		return rc;
>     +
>     +	if (rc != 6)
>     +		return -EPROTO;
>     +
>     +	return snprintf(buf, PAGE_SIZE, "%u.%02u%u-%u.%02u\n",
>     +			data[1], data[2]/* < 100 */, data[3]/*< 10*/,
>     +			data[4], data[5]/* < 100 */);
>     +}
>     +
>     +static ssize_t ipsps_mode_show(struct device *dev,
>     +			       struct device_attribute *devattr, char *buf)
>     +{
>     +	u8 reg;
>     +	int rc;
>     +	struct i2c_client *client = to_i2c_client(dev->parent);
>     +	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
>     +
>     +	reg = ipsps_regs[attr->index];
>     +	rc = i2c_smbus_read_byte_data(client, reg);
>     +	if (rc < 0)
>     +		return rc;
>     +
>     +	switch (rc) {
>     +	case MODE_ACTIVE:
>     +		return snprintf(buf, PAGE_SIZE, "[%s] %s %s\n",
>     +				MODE_ACTIVE_STRING,
>     +				MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
>     +	case MODE_STANDBY:
>     +		return snprintf(buf, PAGE_SIZE, "%s [%s] %s\n",
>     +				MODE_ACTIVE_STRING,
>     +				MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
>     +	case MODE_REDUNDANCY:
>     +		return snprintf(buf, PAGE_SIZE, "%s %s [%s]\n",
>     +				MODE_ACTIVE_STRING,
>     +				MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
>     +	default:
>     +		return snprintf(buf, PAGE_SIZE, "unspecified\n");
>     +	}
>     +}
>     +
>     +static ssize_t ipsps_mode_store(struct device *dev,
>     +				struct device_attribute *devattr,
>     +				const char *buf, size_t count)
>     +{
>     +	u8 reg;
>     +	int rc;
>     +	struct i2c_client *client = to_i2c_client(dev->parent);
>     +	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
>     +
>     +	reg = ipsps_regs[attr->index];
>     +	if (sysfs_streq(MODE_STANDBY_STRING, buf)) {
>     +		rc = i2c_smbus_write_byte_data(client, reg,
>     +					       MODE_STANDBY);
>     +		if (rc < 0)
>     +			return rc;
>     +		return count;
>     +	} else if (sysfs_streq(MODE_ACTIVE_STRING, buf)) {
>     +		rc = i2c_smbus_write_byte_data(client, reg,
>     +					       MODE_ACTIVE);
>     +		if (rc < 0)
>     +			return rc;
>     +		return count;
>     +	}
>     +
>     +	return -EINVAL;
>     +}
>     +
>     +static SENSOR_DEVICE_ATTR_RO(vendor, ipsps_string, vendor);
>     +static SENSOR_DEVICE_ATTR_RO(model, ipsps_string, model);
>     +static SENSOR_DEVICE_ATTR_RO(part_number, ipsps_string, part_number);
>     +static SENSOR_DEVICE_ATTR_RO(serial_number, ipsps_string, serial_number);
>     +static SENSOR_DEVICE_ATTR_RO(hw_version, ipsps_string, hw_version);
>     +static SENSOR_DEVICE_ATTR_RO(fw_version, ipsps_fw_version, fw_version);
>     +static SENSOR_DEVICE_ATTR_RW(mode, ipsps_mode, mode);
>     +
>     +static struct attribute *ipsps_attrs[] = {
>     +	&sensor_dev_attr_vendor.dev_attr.attr,
>     +	&sensor_dev_attr_model.dev_attr.attr,
>     +	&sensor_dev_attr_part_number.dev_attr.attr,
>     +	&sensor_dev_attr_serial_number.dev_attr.attr,
>     +	&sensor_dev_attr_hw_version.dev_attr.attr,
>     +	&sensor_dev_attr_fw_version.dev_attr.attr,
>     +	&sensor_dev_attr_mode.dev_attr.attr,
>     +	NULL,
>     +};
>     +
>     +ATTRIBUTE_GROUPS(ipsps);
>     +
>     +static struct pmbus_driver_info ipsps_info = {
>     +	.pages = 1,
>     +	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
>     +		PMBUS_HAVE_IIN | PMBUS_HAVE_POUT | PMBUS_HAVE_PIN |
>     +		PMBUS_HAVE_FAN12 | PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 |
>     +		PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_VOUT |
>     +		PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT |
>     +		PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_STATUS_FAN12,
>     +	.groups = ipsps_groups,
>     +};
>     +
>     +static struct pmbus_platform_data ipsps_pdata = {
>     +	.flags = PMBUS_SKIP_STATUS_CHECK,
>     +};
>     +
>     +static int ipsps_probe(struct i2c_client *client,
>     +		       const struct i2c_device_id *id)
>     +{
>     +	client->dev.platform_data = &ipsps_pdata;
>     +	return pmbus_do_probe(client, id, &ipsps_info);
>     +}
>     +
>     +static const struct i2c_device_id ipsps_id[] = {
>     +	{ "inspur_ipsps1", 0 },
>     +	{}
>     +};
>     +MODULE_DEVICE_TABLE(i2c, ipsps_id);
>     +
>     +static const struct of_device_id ipsps_of_match[] = {
>     +	{ .compatible = "inspur,ipsps1" },
>     +	{}
>     +};
>     +MODULE_DEVICE_TABLE(of, ipsps_of_match);
>     +
>     +static struct i2c_driver ipsps_driver = {
>     +	.driver = {
>     +		.name = "inspur-ipsps",
>     +		.of_match_table = ipsps_of_match,
>     +	},
>     +	.probe = ipsps_probe,
>     +	.remove = pmbus_do_remove,
>     +	.id_table = ipsps_id,
>     +};
>     +
>     +module_i2c_driver(ipsps_driver);
>     +
>     +MODULE_AUTHOR("John Wang");
>     +MODULE_DESCRIPTION("PMBus driver for Inspur Power System power supplies");
>     +MODULE_LICENSE("GPL");
>     -- 
>     2.17.1
>     
>     
> 


More information about the openbmc mailing list