[PATCH v4 2/2] hwmon: pmbus: Add Inspur Power System power supply driver
Vijay Khemka
vijaykhemka at fb.com
Fri Aug 16 04:43:52 AEST 2019
On 8/13/19, 1:36 AM, "openbmc on behalf of John Wang" <openbmc-bounces+vijaykhemka=fb.com at lists.ozlabs.org on behalf of wangzqbj at inspur.com> wrote:
Add the driver to monitor Inspur Power System power supplies
with hwmon over pmbus.
This driver adds sysfs attributes for additional power supply data,
including vendor, model, part_number, serial number,
firmware revision, hardware revision, and psu mode(active/standby).
Signed-off-by: John Wang <wangzqbj at inspur.com>
---
v4:
- Remove the additional tabs in the Makefile
- Rebased on 5.3-rc4, not 5.2
v3:
- Sort kconfig/makefile entries alphabetically
- Remove unnecessary initialization
- Use ATTRIBUTE_GROUPS instead of expanding directly
- Use memscan to avoid reimplementation
v2:
- Fix typos in commit message
- Invert Christmas tree
- Configure device with sysfs attrs, not debugfs entries
- Fix errno in fw_version_read, ENODATA to EPROTO
- Change the print format of fw-version
- Use sysfs_streq instead of strcmp("xxx" "\n", "xxx")
- Document sysfs attributes
---
Documentation/hwmon/inspur-ipsps1.rst | 79 +++++++++
drivers/hwmon/pmbus/Kconfig | 9 +
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/inspur-ipsps.c | 226 ++++++++++++++++++++++++++
4 files changed, 315 insertions(+)
create mode 100644 Documentation/hwmon/inspur-ipsps1.rst
create mode 100644 drivers/hwmon/pmbus/inspur-ipsps.c
diff --git a/Documentation/hwmon/inspur-ipsps1.rst b/Documentation/hwmon/inspur-ipsps1.rst
new file mode 100644
index 000000000000..aa19f0ccc8b0
--- /dev/null
+++ b/Documentation/hwmon/inspur-ipsps1.rst
@@ -0,0 +1,79 @@
+Kernel driver inspur-ipsps1
+=======================
+
+Supported chips:
+
+ * Inspur Power System power supply unit
+
+Author: John Wang <wangzqbj at inspur.com>
+
+Description
+-----------
+
+This driver supports Inspur Power System power supplies. This driver
+is a client to the core PMBus driver.
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices for
+details.
+
+Sysfs entries
+-------------
+
+The following attributes are supported:
+
+======================= ======================================================
+curr1_input Measured input current
+curr1_label "iin"
+curr1_max Maximum current
+curr1_max_alarm Current high alarm
+curr2_input Measured output current in mA.
+curr2_label "iout1"
+curr2_crit Critical maximum current
+curr2_crit_alarm Current critical high alarm
+curr2_max Maximum current
+curr2_max_alarm Current high alarm
+
Please align above details.
+fan1_alarm Fan 1 warning.
+fan1_fault Fan 1 fault.
+fan1_input Fan 1 speed in RPM.
+
+in1_alarm Input voltage under-voltage alarm.
+in1_input Measured input voltage in mV.
+in1_label "vin"
+in2_input Measured output voltage in mV.
+in2_label "vout1"
+in2_lcrit Critical minimum output voltage
+in2_lcrit_alarm Output voltage critical low alarm
+in2_max Maximum output voltage
+in2_max_alarm Output voltage high alarm
+in2_min Minimum output voltage
+in2_min_alarm Output voltage low alarm
+
+power1_alarm Input fault or alarm.
+power1_input Measured input power in uW.
+power1_label "pin"
+power1_max Input power limit
+power2_max_alarm Output power high alarm
+power2_max Output power limit
+power2_input Measured output power in uW.
+power2_label "pout"
+
Same alignment issue in description.
+temp[1-3]_input Measured temperature
+temp[1-2]_max Maximum temperature
+temp[1-3]_max_alarm Temperature high alarm
+
+vendor Manufacturer name
+model Product model
+part_number Product part number
+serial_number Product serial number
+fw_version Firmware version
+hw_version Hardware version
+mode Work mode. Can be set to active or
+ standby, when set to standby, PSU will
+ automatically switch between standby
+ and redundancy mode.
+======================= ======================================================
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index b6588483fae1..d62d69bb7e49 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -46,6 +46,15 @@ config SENSORS_IBM_CFFPS
This driver can also be built as a module. If so, the module will
be called ibm-cffps.
+config SENSORS_INSPUR_IPSPS
+ tristate "INSPUR Power System Power Supply"
+ help
+ If you say yes here you get hardware monitoring support for the INSPUR
+ Power System power supply.
+
+ This driver can also be built as a module. If so, the module will
+ be called inspur-ipsps.
+
config SENSORS_IR35221
tristate "Infineon IR35221"
help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index c950ea9a5d00..03bacfcfd660 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_PMBUS) += pmbus_core.o
obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o
obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o
obj-$(CONFIG_SENSORS_IBM_CFFPS) += ibm-cffps.o
+obj-$(CONFIG_SENSORS_INSPUR_IPSPS) += inspur-ipsps.o
obj-$(CONFIG_SENSORS_IR35221) += ir35221.o
obj-$(CONFIG_SENSORS_IR38064) += ir38064.o
obj-$(CONFIG_SENSORS_IRPS5401) += irps5401.o
diff --git a/drivers/hwmon/pmbus/inspur-ipsps.c b/drivers/hwmon/pmbus/inspur-ipsps.c
new file mode 100644
index 000000000000..fa981b881a60
--- /dev/null
+++ b/drivers/hwmon/pmbus/inspur-ipsps.c
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2019 Inspur Corp.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/pmbus.h>
+#include <linux/hwmon-sysfs.h>
+
+#include "pmbus.h"
+
+#define IPSPS_REG_VENDOR_ID 0x99
+#define IPSPS_REG_MODEL 0x9A
+#define IPSPS_REG_FW_VERSION 0x9B
+#define IPSPS_REG_PN 0x9C
+#define IPSPS_REG_SN 0x9E
+#define IPSPS_REG_HW_VERSION 0xB0
+#define IPSPS_REG_MODE 0xFC
+
+#define MODE_ACTIVE 0x55
+#define MODE_STANDBY 0x0E
+#define MODE_REDUNDANCY 0x00
+
+#define MODE_ACTIVE_STRING "active"
+#define MODE_STANDBY_STRING "standby"
+#define MODE_REDUNDANCY_STRING "redundancy"
+
+enum ipsps_index {
+ vendor,
+ model,
+ fw_version,
+ part_number,
+ serial_number,
+ hw_version,
+ mode,
+ num_regs,
+};
+
+static const u8 ipsps_regs[num_regs] = {
+ [vendor] = IPSPS_REG_VENDOR_ID,
+ [model] = IPSPS_REG_MODEL,
+ [fw_version] = IPSPS_REG_FW_VERSION,
+ [part_number] = IPSPS_REG_PN,
+ [serial_number] = IPSPS_REG_SN,
+ [hw_version] = IPSPS_REG_HW_VERSION,
+ [mode] = IPSPS_REG_MODE,
+};
+
+static ssize_t ipsps_string_show(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ u8 reg;
+ int rc;
+ char *p;
+ char data[I2C_SMBUS_BLOCK_MAX + 1];
+ struct i2c_client *client = to_i2c_client(dev->parent);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+
+ reg = ipsps_regs[attr->index];
+ rc = i2c_smbus_read_block_data(client, reg, data);
+ if (rc < 0)
+ return rc;
+
+ /* filled with printable characters, ending with # */
+ p = memscan(data, '#', rc);
+ *p = '\0';
+
+ return snprintf(buf, PAGE_SIZE, "%s\n", data);
+}
+
+static ssize_t ipsps_fw_version_show(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ u8 reg;
+ int rc;
+ u8 data[I2C_SMBUS_BLOCK_MAX] = { 0 };
+ struct i2c_client *client = to_i2c_client(dev->parent);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+
+ reg = ipsps_regs[attr->index];
+ rc = i2c_smbus_read_block_data(client, reg, data);
+ if (rc < 0)
+ return rc;
+
+ if (rc != 6)
+ return -EPROTO;
+
+ return snprintf(buf, PAGE_SIZE, "%u.%02u%u-%u.%02u\n",
+ data[1], data[2]/* < 100 */, data[3]/*< 10*/,
+ data[4], data[5]/* < 100 */);
+}
+
+static ssize_t ipsps_mode_show(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ u8 reg;
+ int rc;
+ struct i2c_client *client = to_i2c_client(dev->parent);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+
+ reg = ipsps_regs[attr->index];
+ rc = i2c_smbus_read_byte_data(client, reg);
+ if (rc < 0)
+ return rc;
+
+ switch (rc) {
+ case MODE_ACTIVE:
+ return snprintf(buf, PAGE_SIZE, "[%s] %s %s\n",
+ MODE_ACTIVE_STRING,
+ MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
+ case MODE_STANDBY:
+ return snprintf(buf, PAGE_SIZE, "%s [%s] %s\n",
+ MODE_ACTIVE_STRING,
+ MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
+ case MODE_REDUNDANCY:
+ return snprintf(buf, PAGE_SIZE, "%s %s [%s]\n",
+ MODE_ACTIVE_STRING,
+ MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
+ default:
+ return snprintf(buf, PAGE_SIZE, "unspecified\n");
+ }
+}
+
+static ssize_t ipsps_mode_store(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ u8 reg;
+ int rc;
+ struct i2c_client *client = to_i2c_client(dev->parent);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+
+ reg = ipsps_regs[attr->index];
+ if (sysfs_streq(MODE_STANDBY_STRING, buf)) {
+ rc = i2c_smbus_write_byte_data(client, reg,
+ MODE_STANDBY);
+ if (rc < 0)
+ return rc;
+ return count;
+ } else if (sysfs_streq(MODE_ACTIVE_STRING, buf)) {
+ rc = i2c_smbus_write_byte_data(client, reg,
+ MODE_ACTIVE);
+ if (rc < 0)
+ return rc;
+ return count;
+ }
+
+ return -EINVAL;
+}
+
+static SENSOR_DEVICE_ATTR_RO(vendor, ipsps_string, vendor);
+static SENSOR_DEVICE_ATTR_RO(model, ipsps_string, model);
+static SENSOR_DEVICE_ATTR_RO(part_number, ipsps_string, part_number);
+static SENSOR_DEVICE_ATTR_RO(serial_number, ipsps_string, serial_number);
+static SENSOR_DEVICE_ATTR_RO(hw_version, ipsps_string, hw_version);
+static SENSOR_DEVICE_ATTR_RO(fw_version, ipsps_fw_version, fw_version);
+static SENSOR_DEVICE_ATTR_RW(mode, ipsps_mode, mode);
+
+static struct attribute *ipsps_attrs[] = {
+ &sensor_dev_attr_vendor.dev_attr.attr,
+ &sensor_dev_attr_model.dev_attr.attr,
+ &sensor_dev_attr_part_number.dev_attr.attr,
+ &sensor_dev_attr_serial_number.dev_attr.attr,
+ &sensor_dev_attr_hw_version.dev_attr.attr,
+ &sensor_dev_attr_fw_version.dev_attr.attr,
+ &sensor_dev_attr_mode.dev_attr.attr,
+ NULL,
+};
+
+ATTRIBUTE_GROUPS(ipsps);
+
+static struct pmbus_driver_info ipsps_info = {
+ .pages = 1,
+ .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
+ PMBUS_HAVE_IIN | PMBUS_HAVE_POUT | PMBUS_HAVE_PIN |
+ PMBUS_HAVE_FAN12 | PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 |
+ PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_VOUT |
+ PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT |
+ PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_STATUS_FAN12,
This can be dynamic read by chip identify function
+ .groups = ipsps_groups,
+};
+
+static struct pmbus_platform_data ipsps_pdata = {
+ .flags = PMBUS_SKIP_STATUS_CHECK,
+};
+
+static int ipsps_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ client->dev.platform_data = &ipsps_pdata;
Allocate memory for this platform data inside tis function rather than having global variable.
+ return pmbus_do_probe(client, id, &ipsps_info);
+}
+
+static const struct i2c_device_id ipsps_id[] = {
+ { "inspur_ipsps1", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, ipsps_id);
+
+static const struct of_device_id ipsps_of_match[] = {
+ { .compatible = "inspur,ipsps1" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, ipsps_of_match);
+
+static struct i2c_driver ipsps_driver = {
+ .driver = {
+ .name = "inspur-ipsps",
+ .of_match_table = ipsps_of_match,
+ },
+ .probe = ipsps_probe,
+ .remove = pmbus_do_remove,
+ .id_table = ipsps_id,
+};
+
+module_i2c_driver(ipsps_driver);
+
+MODULE_AUTHOR("John Wang");
+MODULE_DESCRIPTION("PMBus driver for Inspur Power System power supplies");
+MODULE_LICENSE("GPL");
--
2.17.1
More information about the openbmc
mailing list