[PATCH v2 2/2] hwmon: pmbus: Add Inspur Power System power supply driver
Milton Miller II
miltonm at us.ibm.com
Mon Aug 12 08:55:57 AEST 2019
Around 08/10/2019 04:55AM in some time zone, John Wang wrote:
>
>Add the driver to monitor Inspur Power System power supplies
>with hwmon over pmbus.
>
>This driver adds sysfs attributes for additional power supply data,
>including vendor, model, part_number, serial number,
>firmware revision, hardware revision, and psu mode(active/standby).
>
>Signed-off-by: John Wang <wangzqbj at inspur.com>
>---
>v2:
> - Fix typos in commit message
> - Invert Christmas tree
> - Configure device with sysfs attrs, not debugfs entries
> - Fix errno in fw_version_read, ENODATA to EPROTO
> - Change the print format of fw-version
> - Use sysfs_streq instead of strcmp("xxx" "\n", "xxx")
> - Document sysfs attributes
>---
> Documentation/hwmon/inspur-ipsps1.rst | 79 +++++++++
> drivers/hwmon/pmbus/Kconfig | 9 +
> drivers/hwmon/pmbus/Makefile | 1 +
> drivers/hwmon/pmbus/inspur-ipsps.c | 236
>++++++++++++++++++++++++++
> 4 files changed, 325 insertions(+)
> create mode 100644 Documentation/hwmon/inspur-ipsps1.rst
> create mode 100644 drivers/hwmon/pmbus/inspur-ipsps.c
>
>diff --git a/Documentation/hwmon/inspur-ipsps1.rst
>b/Documentation/hwmon/inspur-ipsps1.rst
....
>diff --git a/drivers/hwmon/pmbus/Kconfig>b/drivers/hwmon/pmbus/Kconfig
>index 30751eb9550a..c09357c26b10 100644
>--- a/drivers/hwmon/pmbus/Kconfig
>+++ b/drivers/hwmon/pmbus/Kconfig
>@@ -203,4 +203,13 @@ config SENSORS_ZL6100
> This driver can also be built as a module. If so, the module will
> be called zl6100.
>
>+config SENSORS_INSPUR_IPSPS
>+ tristate "INSPUR Power System Power Supply"
The entries in this file are sorted alphabetically.
>diff --git a/drivers/hwmon/pmbus/Makefile>b/drivers/hwmon/pmbus/Makefile
>index 2219b9300316..fde2d10cd05c 100644
>--- a/drivers/hwmon/pmbus/Makefile
>+++ b/drivers/hwmon/pmbus/Makefile
>@@ -23,3 +23,4 @@ obj-$(CONFIG_SENSORS_TPS53679) += tps53679.o
> obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o
> obj-$(CONFIG_SENSORS_UCD9200) += ucd9200.o
> obj-$(CONFIG_SENSORS_ZL6100) += zl6100.o
>+obj-$(CONFIG_SENSORS_INSPUR_IPSPS) += inspur-ipsps.o
>diff --git a/drivers/hwmon/pmbus/inspur-ipsps.c
>b/drivers/hwmon/pmbus/inspur-ipsps.c
>new file mode 100644
>index 000000000000..f6dd10a62aef
>--- /dev/null
>+++ b/drivers/hwmon/pmbus/inspur-ipsps.c
>@@ -0,0 +1,236 @@
>+// SPDX-License-Identifier: GPL-2.0-or-later
>+/*
>+ * Copyright 2019 Inspur Corp.
>+ */
>+
>+#include <linux/debugfs.h>
>+#include <linux/device.h>
>+#include <linux/fs.h>
>+#include <linux/i2c.h>
>+#include <linux/module.h>
>+#include <linux/pmbus.h>
>+#include <linux/hwmon-sysfs.h>
>+
>+#include "pmbus.h"
>+
>+#define IPSPS_REG_VENDOR_ID 0x99
>+#define IPSPS_REG_MODEL 0x9A
>+#define IPSPS_REG_FW_VERSION 0x9B
>+#define IPSPS_REG_PN 0x9C
>+#define IPSPS_REG_SN 0x9E
>+#define IPSPS_REG_HW_VERSION 0xB0
>+#define IPSPS_REG_MODE 0xFC
>+
>+#define MODE_ACTIVE 0x55
>+#define MODE_STANDBY 0x0E
>+#define MODE_REDUNDANCY 0x00
>+
>+#define MODE_ACTIVE_STRING "active"
>+#define MODE_STANDBY_STRING "standby"
>+#define MODE_REDUNDANCY_STRING "redundancy"
>+
>+enum ipsps_index {
>+ vendor,
>+ model,
>+ fw_version,
>+ part_number,
>+ serial_number,
>+ hw_version,
>+ mode,
>+ num_regs,
>+};
>+
>+static const u8 ipsps_regs[num_regs] = {
>+ [vendor] = IPSPS_REG_VENDOR_ID,
>+ [model] = IPSPS_REG_MODEL,
>+ [fw_version] = IPSPS_REG_FW_VERSION,
>+ [part_number] = IPSPS_REG_PN,
>+ [serial_number] = IPSPS_REG_SN,
>+ [hw_version] = IPSPS_REG_HW_VERSION,
>+ [mode] = IPSPS_REG_MODE,
>+};
>+
>+static ssize_t ipsps_string_show(struct device *dev,
>+ struct device_attribute *devattr,
>+ char *buf)
>+{
>+ u8 reg;
>+ int rc, i;
>+ char data[I2C_SMBUS_BLOCK_MAX + 1] = { 0 };
Shouldn't need to initialize this.
>+ struct i2c_client *client = to_i2c_client(dev->parent);>+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
>+
>+ reg = ipsps_regs[attr->index];
>+ rc = i2c_smbus_read_block_data(client, reg, data);
>+ if (rc < 0)
>+ return rc;
>+
>+ for (i = 0; i < rc; i++) {
>+ /* filled with printable characters, ending with # */
>+ if (data[i] == '#')
>+ break;
>+ }
This seems to be p = memscan(data, '#', rc);
>+>+ data[i] = '\0';
>+
>+ return snprintf(buf, PAGE_SIZE, "%s\n", data);
>+}
>+
>+static ssize_t ipsps_fw_version_show(struct device *dev,
>+ struct device_attribute *devattr,
>+ char *buf)
>+{
>+ u8 reg;
>+ int rc;
>+ u8 data[I2C_SMBUS_BLOCK_MAX] = { 0 };
>+ struct i2c_client *client = to_i2c_client(dev->parent);
>+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
>+
>+ reg = ipsps_regs[attr->index];
>+ rc = i2c_smbus_read_block_data(client, reg, data);
>+ if (rc < 0)
>+ return rc;
>+
>+ if (rc != 6)
>+ return -EPROTO;
>+
>+ return snprintf(buf, PAGE_SIZE, "%u.%02u%u-%u.%02u\n",
>+ data[1], data[2]/* < 100 */, data[3]/*< 10*/,
>+ data[4], data[5]/* < 100 */);
>+}
>+
>+static ssize_t ipsps_mode_show(struct device *dev,
>+ struct device_attribute *devattr, char *buf)
>+{
>+ u8 reg;
>+ int rc;
>+ struct i2c_client *client = to_i2c_client(dev->parent);
>+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
>+
>+ reg = ipsps_regs[attr->index];
>+ rc = i2c_smbus_read_byte_data(client, reg);
>+ if (rc < 0)
>+ return rc;
>+
>+ switch (rc) {
>+ case MODE_ACTIVE:
>+ return snprintf(buf, PAGE_SIZE, "[%s] %s %s\n",
>+ MODE_ACTIVE_STRING,
>+ MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
>+ case MODE_STANDBY:
>+ return snprintf(buf, PAGE_SIZE, "%s [%s] %s\n",
>+ MODE_ACTIVE_STRING,
>+ MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
>+ case MODE_REDUNDANCY:
>+ return snprintf(buf, PAGE_SIZE, "%s %s [%s]\n",
>+ MODE_ACTIVE_STRING,
>+ MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
>+ default:
>+ return snprintf(buf, PAGE_SIZE, "unspecified\n");
>+ }
>+}
>+
>+static ssize_t ipsps_mode_store(struct device *dev,
>+ struct device_attribute *devattr,
>+ const char *buf, size_t count)
>+{
>+ u8 reg;
>+ int rc;
>+ struct i2c_client *client = to_i2c_client(dev->parent);
>+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
>+
>+ reg = ipsps_regs[attr->index];
>+ if (sysfs_streq(MODE_STANDBY_STRING, buf)) {
>+ rc = i2c_smbus_write_byte_data(client, reg,
>+ MODE_STANDBY);
>+ if (rc < 0)
>+ return rc;
>+ return count;
>+ } else if (sysfs_streq(MODE_ACTIVE_STRING, buf)) {
>+ rc = i2c_smbus_write_byte_data(client, reg,
>+ MODE_ACTIVE);
>+ if (rc < 0)
>+ return rc;
>+ return count;
>+ }
>+
>+ return -EINVAL;
>+}
>+
>+static SENSOR_DEVICE_ATTR_RO(vendor, ipsps_string, vendor);
>+static SENSOR_DEVICE_ATTR_RO(model, ipsps_string, model);
>+static SENSOR_DEVICE_ATTR_RO(part_number, ipsps_string,
>part_number);
>+static SENSOR_DEVICE_ATTR_RO(serial_number, ipsps_string,
>serial_number);
>+static SENSOR_DEVICE_ATTR_RO(hw_version, ipsps_string, hw_version);
>+static SENSOR_DEVICE_ATTR_RO(fw_version, ipsps_fw_version,
>fw_version);
>+static SENSOR_DEVICE_ATTR_RW(mode, ipsps_mode, mode);
>+
>+static struct attribute *enable_attrs[] = {
>+ &sensor_dev_attr_vendor.dev_attr.attr,
>+ &sensor_dev_attr_model.dev_attr.attr,
>+ &sensor_dev_attr_part_number.dev_attr.attr,
>+ &sensor_dev_attr_serial_number.dev_attr.attr,
>+ &sensor_dev_attr_hw_version.dev_attr.attr,
>+ &sensor_dev_attr_fw_version.dev_attr.attr,
>+ &sensor_dev_attr_mode.dev_attr.attr,
>+ NULL,
>+};
>+
>+static const struct attribute_group enable_group = {
>+ .attrs = enable_attrs,
>+};
>+
>+static const struct attribute_group *attribute_groups[] = {
>+ &enable_group,
>+ NULL,
>+};
ATTRIBUTE_GROUPS(enable);
>+
>+static struct pmbus_driver_info ipsps_info = {
>+ .pages = 1,
>+ .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
>+ PMBUS_HAVE_IIN | PMBUS_HAVE_POUT | PMBUS_HAVE_PIN |
>+ PMBUS_HAVE_FAN12 | PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 |
>+ PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_VOUT |
>+ PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT |
>+ PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_STATUS_FAN12,
>+ .groups = attribute_groups,
>+};
>+
>+static struct pmbus_platform_data ipsps_pdata = {
>+ .flags = PMBUS_SKIP_STATUS_CHECK,
>+};
>+
>+static int ipsps_probe(struct i2c_client *client,
>+ const struct i2c_device_id *id)
>+{
>+ client->dev.platform_data = &ipsps_pdata;
>+ return pmbus_do_probe(client, id, &ipsps_info);
>+}
>+
>+static const struct i2c_device_id ipsps_id[] = {
>+ { "inspur_ipsps1", 0 },
>+ {}
>+};
>+MODULE_DEVICE_TABLE(i2c, ipsps_id);
>+
>+static const struct of_device_id ipsps_of_match[] = {
>+ { .compatible = "inspur,ipsps1" },
>+ {}
>+};
>+MODULE_DEVICE_TABLE(of, ipsps_of_match);
>+
>+static struct i2c_driver ipsps_driver = {
>+ .driver = {
>+ .name = "inspur-ipsps",
>+ .of_match_table = ipsps_of_match,
>+ },
>+ .probe = ipsps_probe,
>+ .remove = pmbus_do_remove,
>+ .id_table = ipsps_id,
>+};
>+
>+module_i2c_driver(ipsps_driver);
>+
>+MODULE_AUTHOR("John Wang");
>+MODULE_DESCRIPTION("PMBus driver for Inspur Power System power
>supplies");
>+MODULE_LICENSE("GPL");
>--
>2.17.1
>
>
More information about the openbmc
mailing list