[PATCH] hwmon: pmbus: Add Inspur Power System power supply driver
John Wang
wangzqbj at inspur.com
Thu Aug 8 17:36:36 AEST 2019
Add the driver to monitor Inspur Power System power supplies
with hwmon over pmbus.
This driver adds debugfs entries for addintional power supply data,
including vendor,model,part_number,serial number,firmware revision,
hardware revision,and psu mode(active/standby).
Signed-off-by: John Wang <wangzqbj at inspur.com>
---
drivers/hwmon/pmbus/Kconfig | 9 +
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/inspur-ipsps.c | 291 +++++++++++++++++++++++++++++
3 files changed, 301 insertions(+)
create mode 100644 drivers/hwmon/pmbus/inspur-ipsps.c
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 30751eb9550a..c09357c26b10 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -203,4 +203,13 @@ config SENSORS_ZL6100
This driver can also be built as a module. If so, the module will
be called zl6100.
+config SENSORS_INSPUR_IPSPS
+ tristate "INSPUR Power System Power Supply"
+ help
+ If you say yes here you get hardware monitoring support for the INSPUR
+ Power System power supply.
+
+ This driver can also be built as a module. If so, the module will
+ be called inspur-ipsps.
+
endif # PMBUS
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index 2219b9300316..fde2d10cd05c 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -23,3 +23,4 @@ obj-$(CONFIG_SENSORS_TPS53679) += tps53679.o
obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o
obj-$(CONFIG_SENSORS_UCD9200) += ucd9200.o
obj-$(CONFIG_SENSORS_ZL6100) += zl6100.o
+obj-$(CONFIG_SENSORS_INSPUR_IPSPS) += inspur-ipsps.o
diff --git a/drivers/hwmon/pmbus/inspur-ipsps.c b/drivers/hwmon/pmbus/inspur-ipsps.c
new file mode 100644
index 000000000000..7dc2b00cb192
--- /dev/null
+++ b/drivers/hwmon/pmbus/inspur-ipsps.c
@@ -0,0 +1,291 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2019 Inspur Corp.
+ */
+
+#include <linux/bitops.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/pmbus.h>
+
+#include "pmbus.h"
+
+#define IPSPS_VENDOR_ID 0x99
+#define IPSPS_MODEL 0x9A
+#define IPSPS_FW_VERSION 0x9B
+#define IPSPS_PN 0x9C
+#define IPSPS_SN 0x9E
+#define IPSPS_HW_VERSION 0xB0
+#define IPSPS_MODE 0xFC
+
+#define MODE_ACTIVE 0x55
+#define MODE_STANDBY 0x0E
+#define MODE_REDUNDANCY 0x00
+
+#define MODE_ACTIVE_STRING "active"
+#define MODE_STANDBY_STRING "standby"
+#define MODE_REDUNDANCY_STRING "redundancy"
+
+struct ipsps_attr {
+ u8 reg;
+ umode_t mode;
+ const char *name;
+ int mask;
+ const struct file_operations *fops;
+};
+
+struct ipsps_entry {
+ struct i2c_client *client;
+ u8 reg;
+};
+
+static ssize_t ipsps_string_read(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct ipsps_entry *entry = file->private_data;
+ char data[I2C_SMBUS_BLOCK_MAX + 1] = { 0 };
+ int i, rc;
+
+ rc = i2c_smbus_read_block_data(entry->client, entry->reg, data);
+ if (rc <= 0)
+ return rc;
+
+ for (i = 0; i < rc; i++) {
+ if (data[i] == '#')
+ break;
+ }
+
+ data[i] = '\n';
+ i++;
+ data[i] = '\0';
+ i++;
+
+ return simple_read_from_buffer(buf, count, ppos, data, i);
+
+}
+
+static ssize_t ipsps_fw_version_read(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ char data[I2C_SMBUS_BLOCK_MAX] = { 0 };
+ int rc;
+ struct ipsps_entry *entry = file->private_data;
+
+ rc = i2c_smbus_read_block_data(entry->client, entry->reg, data);
+ if (rc < 0)
+ return rc;
+
+ if (rc != 6)
+ return -ENODATA;
+
+ rc = snprintf(data, sizeof(data), "%d.%02d.%02d\n",
+ data[1], data[2], data[3]);
+
+ return simple_read_from_buffer(buf, count, ppos, data, rc);
+}
+
+static ssize_t ipsps_mode_read(struct file *file,
+ char __user *buf, size_t count,
+ loff_t *ppos)
+{
+ int rc;
+ char data[64] = { 0 };
+ struct ipsps_entry *entry = file->private_data;
+
+ rc = i2c_smbus_read_byte_data(entry->client, entry->reg);
+ if (rc < 0)
+ return rc;
+
+ switch (rc) {
+ case MODE_ACTIVE:
+ rc = snprintf(data, sizeof(data), "[%s] %s %s\n",
+ MODE_ACTIVE_STRING,
+ MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
+ break;
+ case MODE_STANDBY:
+ rc = snprintf(data, sizeof(data), "%s [%s] %s\n",
+ MODE_ACTIVE_STRING,
+ MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
+ break;
+ case MODE_REDUNDANCY:
+ rc = snprintf(data, sizeof(data), "%s %s [%s]\n",
+ MODE_ACTIVE_STRING,
+ MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
+ break;
+ default:
+ rc = snprintf(data, sizeof(data), "unspecified\n");
+ break;
+ }
+
+ return simple_read_from_buffer(buf, count, ppos, data, rc);
+}
+
+static ssize_t ipsps_mode_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ int rc;
+ char data[64] = { 0 };
+ struct ipsps_entry *entry = file->private_data;
+
+ rc = simple_write_to_buffer(data, sizeof(data), ppos, buf, count);
+ if (rc < 0)
+ return rc;
+
+ if (strcmp(MODE_STANDBY_STRING, data) == 0 ||
+ strcmp(MODE_STANDBY_STRING"\n", data) == 0) {
+ rc = i2c_smbus_write_byte_data(entry->client, entry->reg,
+ MODE_STANDBY);
+ if (rc < 0)
+ return rc;
+ return count;
+ } else if (strcmp(MODE_ACTIVE_STRING, data) == 0 ||
+ strcmp(MODE_ACTIVE_STRING"\n", data) == 0) {
+ rc = i2c_smbus_write_byte_data(entry->client, entry->reg,
+ MODE_ACTIVE);
+ if (rc < 0)
+ return rc;
+ return count;
+ }
+
+ return -EINVAL;
+}
+
+static const struct file_operations ipsps_string_fops = {
+ .llseek = noop_llseek,
+ .open = simple_open,
+ .read = ipsps_string_read,
+};
+
+static const struct file_operations ipsps_fw_version_fops = {
+ .llseek = noop_llseek,
+ .open = simple_open,
+ .read = ipsps_fw_version_read,
+};
+
+static const struct file_operations ipsps_mode_fops = {
+ .llseek = noop_llseek,
+ .open = simple_open,
+ .read = ipsps_mode_read,
+ .write = ipsps_mode_write,
+};
+
+struct ipsps_attr ipsps_attrs[] = {
+ {
+ .name = "vendor",
+ .fops = &ipsps_string_fops,
+ .reg = IPSPS_VENDOR_ID,
+ .mode = 0444,
+ }, {
+ .name = "model",
+ .fops = &ipsps_string_fops,
+ .reg = IPSPS_MODEL,
+ .mode = 0444,
+ }, {
+ .name = "fw_version",
+ .fops = &ipsps_fw_version_fops,
+ .reg = IPSPS_FW_VERSION,
+ .mode = 0444,
+ }, {
+ .name = "part_number",
+ .fops = &ipsps_string_fops,
+ .reg = IPSPS_PN,
+ .mode = 0444,
+ }, {
+ .name = "serial_number",
+ .fops = &ipsps_string_fops,
+ .reg = IPSPS_SN,
+ .mode = 0444,
+ }, {
+ .name = "hw_version",
+ .fops = &ipsps_string_fops,
+ .reg = IPSPS_HW_VERSION,
+ .mode = 0444,
+ }, {
+ .name = "mode",
+ .fops = &ipsps_mode_fops,
+ .reg = IPSPS_MODE,
+ .mode = 0644,
+ }
+
+};
+
+static struct pmbus_driver_info ipsps_info = {
+ .pages = 1,
+ .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
+ PMBUS_HAVE_POUT | PMBUS_HAVE_PIN | PMBUS_HAVE_FAN12 |
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3 |
+ PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT |
+ PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP |
+ PMBUS_HAVE_STATUS_FAN12,
+};
+
+static struct pmbus_platform_data ipsps_pdata = {
+ .flags = PMBUS_SKIP_STATUS_CHECK,
+};
+
+static int ipsps_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int i, rc;
+ struct dentry *debugfs;
+ struct dentry *ipsps_dir;
+ struct ipsps_entry *entry;
+
+ client->dev.platform_data = &ipsps_pdata;
+ rc = pmbus_do_probe(client, id, &ipsps_info);
+ if (rc)
+ return rc;
+
+ /* Don't fail the probe if we can't create debugfs */
+ debugfs = pmbus_get_debugfs_dir(client);
+ if (!debugfs)
+ return 0;
+
+ ipsps_dir = debugfs_create_dir(client->name, debugfs);
+ if (!ipsps_dir)
+ return 0;
+
+ for (i = 0; i < ARRAY_SIZE(ipsps_attrs); ++i) {
+ entry = devm_kzalloc(&client->dev, sizeof(*entry), GFP_KERNEL);
+ if (!entry)
+ return 0;
+
+ entry->client = client;
+ entry->reg = ipsps_attrs[i].reg;
+ debugfs_create_file(ipsps_attrs[i].name, ipsps_attrs[i].mode,
+ ipsps_dir, entry, ipsps_attrs[i].fops);
+ }
+
+ return 0;
+}
+
+static const struct i2c_device_id ipsps_id[] = {
+ { "inspur_ipsps1", 1 },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, ipsps_id);
+
+static const struct of_device_id ipsps_of_match[] = {
+ { .compatible = "inspur,ipsps1" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, ipsps_of_match);
+
+static struct i2c_driver ipsps_driver = {
+ .driver = {
+ .name = "inspur-ipsps",
+ .of_match_table = ipsps_of_match,
+ },
+ .probe = ipsps_probe,
+ .remove = pmbus_do_remove,
+ .id_table = ipsps_id,
+};
+
+module_i2c_driver(ipsps_driver);
+
+MODULE_AUTHOR("John Wang");
+MODULE_DESCRIPTION("PMBus driver for Inspur Power System power supplies");
+MODULE_LICENSE("GPL");
--
2.17.1
More information about the openbmc
mailing list