[PATCH v4 4/4] ARM: dts: aspeed: Add Mihawk BMC platform
Ben Pai
Ben_Pai at wistron.com
Thu Aug 8 00:46:54 AEST 2019
The Mihawk BMC is an ASPEED ast2500 based BMC that is part of an
OpenPower Power9 server.
Signed-off-by: Ben Pai <Ben_Pai at wistron.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts | 918 ++++++++++++++++++++
2 files changed, 919 insertions(+)
create mode 100755 arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index eb6de52c1936..cdfe0f43ffd3 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1275,6 +1275,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-lenovo-hr630.dtb \
aspeed-bmc-microsoft-olympus.dtb \
aspeed-bmc-opp-lanyang.dtb \
+ aspeed-bmc-opp-mihawk.dtb \
aspeed-bmc-opp-palmetto.dtb \
aspeed-bmc-opp-romulus.dtb \
aspeed-bmc-opp-swift.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
new file mode 100755
index 000000000000..bbf4a4671421
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
@@ -0,0 +1,918 @@
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+ model = "Mihawk BMC";
+ compatible = "ibm,mihawk-bmc", "aspeed,ast2500";
+
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory at 80000000 {
+ reg = <0x80000000 0x20000000>; /* address and size of RAM(512MB) */
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ flash_memory: region at 98000000 {
+ no-map;
+ reg = <0x98000000 0x04000000>; /* 64M */
+ };
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+
+ video_engine_memory: jpegbuffer {
+ size = <0x02000000>; /* 32MM */
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ air-water {
+ label = "air-water";
+ gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(F, 6)>;
+ };
+
+ checkstop {
+ label = "checkstop";
+ gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(J, 2)>;
+ };
+
+ ps0-presence {
+ label = "ps0-presence";
+ gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(Z, 2)>;
+ };
+
+ ps1-presence {
+ label = "ps1-presence";
+ gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(Z, 0)>;
+ };
+ id-button {
+ label = "id-button";
+ gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(F, 1)>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ poll-interval = <1000>;
+
+ fan0-presence {
+ label = "fan0-presence";
+ gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
+ linux,code = <9>;
+ };
+
+ fan1-presence {
+ label = "fan1-presence";
+ gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
+ linux,code = <10>;
+ };
+
+ fan2-presence {
+ label = "fan2-presence";
+ gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
+ linux,code = <11>;
+ };
+
+ fan3-presence {
+ label = "fan3-presence";
+ gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
+ linux,code = <12>;
+ };
+
+ fan4-presence {
+ label = "fan4-presence";
+ gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
+ linux,code = <13>;
+ };
+
+ fan5-presence {
+ label = "fan5-presence";
+ gpios = <&pca9552 14 GPIO_ACTIVE_LOW>;
+ linux,code = <14>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ fault {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
+ };
+
+ power {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>;
+ };
+
+ rear-id {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ rear-g {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_LOW>;
+ };
+
+ rear-ok {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&gpio ASPEED_GPIO(Y, 0) GPIO_ACTIVE_LOW>;
+ };
+
+ fan0 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca9552 0 GPIO_ACTIVE_LOW>;
+ };
+
+ fan1 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca9552 1 GPIO_ACTIVE_LOW>;
+ };
+
+ fan2 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca9552 2 GPIO_ACTIVE_LOW>;
+ };
+
+ fan3 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca9552 3 GPIO_ACTIVE_LOW>;
+ };
+
+ fan4 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca9552 4 GPIO_ACTIVE_LOW>;
+ };
+
+ fan5 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca9552 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ fsi: gpio-fsi {
+ compatible = "fsi-master-gpio", "fsi-master";
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-gpio-delays;
+
+ clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
+ data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>;
+ mux-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+ trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+ };
+ iio-hwmon-12v {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>;
+ };
+
+ iio-hwmon-5v {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 1>;
+ };
+
+ iio-hwmon-3v {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 2>;
+ };
+
+ iio-hwmon-vdd0 {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 3>;
+ };
+
+ iio-hwmon-vdd1 {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 4>;
+ };
+
+ iio-hwmon-vcs0 {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 5>;
+ };
+
+ iio-hwmon-vcs1 {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 6>;
+ };
+
+ iio-hwmon-vdn0 {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 7>;
+ };
+
+ iio-hwmon-vdn1 {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 8>;
+ };
+
+ iio-hwmon-vio0 {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 9>;
+ };
+
+ iio-hwmon-vio1 {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 10>;
+ };
+
+ iio-hwmon-vddra {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 11>;
+ };
+
+ iio-hwmon-battery {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 12>;
+ };
+
+ iio-hwmon-vddrb {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 13>;
+ };
+
+ iio-hwmon-vddrc {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 14>;
+ };
+
+ iio-hwmon-vddrd {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 15>;
+ };
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+ &pinctrl_pwm2_default &pinctrl_pwm3_default
+ &pinctrl_pwm4_default &pinctrl_pwm5_default>;
+
+ fan at 0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan at 1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+ };
+
+ fan at 2 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan at 3 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+ };
+
+ fan at 4 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+ };
+
+ fan at 5 {
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+ };
+
+ fan at 6 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+ };
+
+ fan at 7 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+ };
+
+ fan at 8 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+ };
+
+ fan at 9 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+ };
+
+ fan at 10 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+ };
+
+ fan at 11 {
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash at 0 {
+ status = "okay";
+ label = "bmc";
+ m25p,fast-read;
+ spi-max-frequency = <50000000>;
+ partitions {
+ #address-cells = < 1 >;
+ #size-cells = < 1 >;
+ compatible = "fixed-partitions";
+ u-boot at 0 {
+ reg = < 0 0x60000 >;
+ label = "u-boot";
+ };
+ u-boot-env at 60000 {
+ reg = < 0x60000 0x20000 >;
+ label = "u-boot-env";
+ };
+ obmc-ubi at 80000 {
+ reg = < 0x80000 0x1F80000 >;
+ label = "obmc-ubi";
+ };
+ };
+ };
+ flash at 1 {
+ status = "okay";
+ label = "alt-bmc";
+ m25p,fast-read;
+ spi-max-frequency = <50000000>;
+ partitions {
+ #address-cells = < 1 >;
+ #size-cells = < 1 >;
+ compatible = "fixed-partitions";
+ u-boot at 0 {
+ reg = < 0 0x60000 >;
+ label = "alt-u-boot";
+ };
+ u-boot-env at 60000 {
+ reg = < 0x60000 0x20000 >;
+ label = "alt-u-boot-env";
+ };
+ obmc-ubi at 80000 {
+ reg = < 0x80000 0x1F80000 >;
+ label = "alt-obmc-ubi";
+ };
+ };
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash at 0 {
+ status = "okay";
+ label = "pnor";
+ m25p,fast-read;
+ spi-max-frequency = <100000000>;
+ };
+};
+
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+ flash = <&spi1>;
+};
+
+&uart1 {
+ /* Rear RS-232 connector */
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default
+ &pinctrl_nrts1_default
+ &pinctrl_ndtr1_default
+ &pinctrl_ndsr1_default
+ &pinctrl_ncts1_default
+ &pinctrl_ndcd1_default
+ &pinctrl_nri1_default>;
+};
+
+&uart2 {
+ /* APSS */
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ use-ncsi;
+};
+
+&mac1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+ status = "disabled";
+};
+
+&i2c1 {
+ status = "disabled";
+};
+
+&i2c2 {
+ status = "okay";
+
+ /* SAMTEC P0 */
+ /* SAMTEC P1 */
+
+};
+
+&i2c3 {
+ status = "okay";
+
+ /* APSS */
+ /* CPLD */
+
+ /* PCA9516 (repeater) ->
+ * CLK Buffer 9FGS9092
+ * CLK Buffer 9DBL0651BKILFT
+ * CLK Buffer 9DBL0651BKILFT
+ * Power Supply 0
+ * Power Supply 1
+ * PCA 9552 LED
+ */
+
+ power-supply at 58 {
+ compatible = "ibm,cffps1";
+ reg = <0x58>;
+ };
+
+ power-supply at 5b {
+ compatible = "ibm,cffps1";
+ reg = <0x5b>;
+ };
+
+ pca9552: pca9552 at 60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio at 0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio at 1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio at 2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio at 3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio at 4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio at 5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio at 6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio at 7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio at 8 {
+ reg = <8>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio at 9 {
+ reg = <9>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio at 10 {
+ reg = <10>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio at 11 {
+ reg = <11>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio at 12 {
+ reg = <12>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio at 13 {
+ reg = <13>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio at 14 {
+ reg = <14>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio at 15 {
+ reg = <15>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ };
+
+};
+
+&i2c4 {
+ status = "okay";
+
+ /* CP0 VDD & VCS : IR35221 */
+ /* CP0 VDN : IR35221 */
+ /* CP0 VIO : IR38064 */
+ /* CP0 VDDR : PXM1330 */
+
+ ir35221 at 70 {
+ compatible = "infineon,ir35221";
+ reg = <0x70>;
+ };
+
+ ir35221 at 72 {
+ compatible = "infineon,ir35221";
+ reg = <0x72>;
+ };
+
+};
+
+&i2c5 {
+ status = "okay";
+
+ /* CP0 VDD & VCS : IR35221 */
+ /* CP0 VDN : IR35221 */
+ /* CP0 VIO : IR38064 */
+ /* CP0 VDDR : PXM1330 */
+
+ ir35221 at 70 {
+ compatible = "infineon,ir35221";
+ reg = <0x70>;
+ };
+
+ ir35221 at 72 {
+ compatible = "infineon,ir35221";
+ reg = <0x72>;
+ };
+
+};
+
+&i2c6 {
+ status = "okay";
+
+ /* pca9548 -> NVMe1 to 8 */
+
+ pca9548 at 70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ };
+
+};
+
+&i2c7 {
+ status = "okay";
+
+ /* pca9548 -> NVMe9 to 16 */
+
+ pca9548 at 70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ };
+
+};
+
+&i2c8 {
+ status = "okay";
+
+ eeprom at 50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+};
+
+&i2c9 {
+ status = "okay";
+
+ /* pca9545 Riser ->
+ * PCIe x8 Slot3
+ * PCIe x16 slot4
+ * PCIe x8 slot5
+ * I2C BMC RISER PCA9554
+ * BMC SCL/SDA PCA9554
+ * PCA9554
+ */
+
+ /* pca9545 ->
+ * PCIe x16 Slot1
+ * PCIe x8 slot2
+ * PEX8748
+ */
+
+ pca9545riser at 70 {
+ compatible = "nxp,pca9545";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+
+ i2c-mux-idle-disconnect;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pca9545 at 71 {
+ compatible = "nxp,pca9545";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x71>;
+
+ i2c-mux-idle-disconnect;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
+&i2c10 {
+ status = "okay";
+
+ /* pca9545 Riser ->
+ * PCIe x8 Slot8
+ * PCIe x16 slot9
+ * PCIe x8 slot10
+ * I2C BMC RISER PCA9554
+ * BMC SCL/SDA PCA9554
+ * PCA9554
+ */
+
+ /* pca9545 ->
+ * PCIe x16 Slot1
+ * PCIe x8 slot2
+ * PEX8748
+ */
+
+ pca9545riser at 70 {
+ compatible = "nxp,pca9545";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+
+ i2c-mux-idle-disconnect;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pca9545 at 71 {
+ compatible = "nxp,pca9545";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x71>;
+
+ i2c-mux-idle-disconnect;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ /* TPM */
+ /* RTC RX8900CE */
+ /* FPGA for power sequence */
+ /* TMP275A */
+ /* TMP275A */
+ /* EMC1462 */
+
+ tpm at 57 {
+ compatible = "infineon,slb9645tt";
+ reg = <0x57>;
+ };
+
+ rtc at 32 {
+ compatible = "epson,rx8900";
+ reg = <0x32>;
+ };
+
+ tmp275 at 48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ tmp275 at 49 {
+ compatible = "ti,tmp275";
+ reg = <0x49>;
+ };
+
+ /* chip emc1462 use emc1403 driver */
+ emc1403 at 4c {
+ compatible = "smsc,emc1403";
+ reg = <0x4c>;
+ };
+
+};
+
+&i2c12 {
+ status = "okay";
+
+ /* pca9545 ->
+ * SAS BP1
+ * SAS BP2
+ * NVMe BP
+ * M.2 riser
+ */
+
+ pca9545 at 70 {
+ compatible = "nxp,pca9545";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ eeprom at 50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ eeprom at 50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ eeprom at 50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ tmp275 at 48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+ };
+
+ };
+
+};
+
+&i2c13 {
+ status = "okay";
+
+ /* pca9548 ->
+ * NVMe BP
+ * NVMe HDD17 to 24
+ */
+
+ pca9548 at 70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ };
+};
+
+&vuart {
+ status = "okay";
+};
+
+&gfx {
+ status = "okay";
+ memory-region = <&gfx_memory>;
+};
+
+&adc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default
+ &pinctrl_adc1_default
+ &pinctrl_adc2_default
+ &pinctrl_adc3_default
+ &pinctrl_adc4_default
+ &pinctrl_adc5_default
+ &pinctrl_adc6_default
+ &pinctrl_adc7_default
+ &pinctrl_adc8_default
+ &pinctrl_adc9_default
+ &pinctrl_adc10_default
+ &pinctrl_adc11_default
+ &pinctrl_adc12_default
+ &pinctrl_adc13_default
+ &pinctrl_adc14_default
+ &pinctrl_adc15_default>;
+};
+
+&wdt1 {
+ aspeed,reset-type = "none";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+ aspeed,alt-boot;
+};
+
+&ibt {
+ status = "okay";
+};
+
+&vhub {
+ status = "okay";
+};
+
+&video {
+ status = "okay";
+ memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
+
--
2.17.1
---------------------------------------------------------------------------------------------------------------------------------------------------------------
This email contains confidential or legally privileged information and is for the sole use of its intended recipient.
Any unauthorized review, use, copying or distribution of this email or the content of this email is strictly prohibited.
If you are not the intended recipient, you may reply to the sender and should delete this e-mail immediately.
---------------------------------------------------------------------------------------------------------------------------------------------------------------
More information about the openbmc
mailing list