[PATCH net-next v3] net: phy: broadcom: add 1000Base-X support for BCM54616S

Vladimir Oltean olteanv at gmail.com
Mon Aug 5 01:59:44 AEST 2019


On Sun, 4 Aug 2019 at 17:52, Andrew Lunn <andrew at lunn.ch> wrote:
>
> > > The patchset looks better now. But is it ok, I wonder, to keep
> > > PHY_BCM_FLAGS_MODE_1000BX in phydev->dev_flags, considering that
> > > phy_attach_direct is overwriting it?
> >
>
> > I checked ftgmac100 driver (used on my machine) and it calls
> > phy_connect_direct which passes phydev->dev_flags when calling
> > phy_attach_direct: that explains why the flag is not cleared in my
> > case.
>
> Yes, that is the way it is intended to be used. The MAC driver can
> pass flags to the PHY. It is a fragile API, since the MAC needs to
> know what PHY is being used, since the flags are driver specific.
>
> One option would be to modify the assignment in phy_attach_direct() to
> OR in the flags passed to it with flags which are already in
> phydev->dev_flags.
>
>         Andrew

Even if that were the case (patching phy_attach_direct to apply a
logical-or to dev_flags), it sounds fishy to me that the genphy code
is unable to determine that this PHY is running in 1000Base-X mode.

In my opinion it all boils down to this warning:

"PHY advertising (0,00000200,000062c0) more modes than genphy
supports, some modes not advertised".

You see, the 0x200 in the above advertising mask corresponds exactly
to this definition from ethtool.h:
    ETHTOOL_LINK_MODE_1000baseX_Full_BIT    = 41,

But it gets truncated and hence lost.

Regards,
-Vladimir


More information about the openbmc mailing list