[PATCH v2] ARM: dts: aspeed: Add Facebook Wedge100 BMC

[Joel Stanley]

On Fri, 2 Aug 2019 at 04:10, Tao Ren <taoren at fb.com> wrote:
>
> Add initial version of device tree for Facebook Wedge100 AST2400 BMC
> platform.
>
> Signed-off-by: Tao Ren <taoren at fb.com>
> Reviewed-by: Andrew Jeffery <andrew at aj.id.au>
> ---
>  Changes in v2:
>  - remove "debug" from bootargs.

Thanks. I applied wedge40 and then this one fails to apply due to
conflicts in the Makefile. Next time you have two patches, send them
as a series they apply one atop the other.

The naming of these two files suggests they come from a family. I
noticed there's very minor differences, a pca9548 switch and the use
of a watchdog.

Are these device trees complete? If yes, do you think it's worthwhile
to have a common wedge description in eg.
aspeed-bmc-facebook-wedge.dtsi, and put the unique description in
respective dts board files?

The upside of this is reduced duplication.

If you have a reason not to, then that is okay and we can leave it as
you submitted them.

Cheers,

Joel

--- arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts    2019-08-02
13:44:26.536934502 +0930
+++ arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts    2019-08-02
13:44:02.980670672 +0930
@@ -5,8 +5,8 @@
 #include "aspeed-g4.dtsi"

 / {
-    model = "Facebook Wedge 100 BMC";
-    compatible = "facebook,wedge100-bmc", "aspeed,ast2400";
+    model = "Facebook Wedge 40 BMC";
+    compatible = "facebook,wedge40-bmc", "aspeed,ast2400";

     aliases {
         /*
@@ -35,8 +35,7 @@
 };

 &wdt2 {
-    status = "okay";
-    aspeed,reset-type = "system";
+    status = "disabled";
 };

 &fmc {
@@ -111,13 +110,6 @@

 &i2c7 {
     status = "okay";
-
-    i2c-switch at 70 {
-        compatible = "nxp,pca9548";
-        #address-cells = <1>;
-        #size-cells = <0>;
-        reg = <0x70>;
-    };
 };

>
>  arch/arm/boot/dts/Makefile                    |   1 +
>  .../boot/dts/aspeed-bmc-facebook-wedge100.dts | 149 ++++++++++++++++++
>  2 files changed, 150 insertions(+)
>  create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 39a05a10a2a2..d71504ed82d3 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1273,6 +1273,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
>         aspeed-bmc-facebook-cmm.dtb \
>         aspeed-bmc-facebook-minipack.dtb \
>         aspeed-bmc-facebook-tiogapass.dtb \
> +       aspeed-bmc-facebook-wedge100.dtb \
>         aspeed-bmc-facebook-yamp.dtb \
>         aspeed-bmc-intel-s2600wf.dtb \
>         aspeed-bmc-inspur-fp5280g2.dtb \
> diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts
> new file mode 100644
> index 000000000000..b1e10f0c85c9
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts
> @@ -0,0 +1,149 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +// Copyright (c) 2018 Facebook Inc.
> +/dts-v1/;
> +
> +#include "aspeed-g4.dtsi"
> +
> +/ {
> +       model = "Facebook Wedge 100 BMC";
> +       compatible = "facebook,wedge100-bmc", "aspeed,ast2400";
> +
> +       aliases {
> +               /*
> +                * Override the default uart aliases to avoid breaking
> +                * the legacy applications.
> +                */
> +               serial0 = &uart5;
> +               serial1 = &uart1;
> +               serial2 = &uart3;
> +               serial3 = &uart4;
> +       };
> +
> +       chosen {
> +               stdout-path = &uart3;
> +               bootargs = "console=ttyS2,9600n8 root=/dev/ram rw";
> +       };
> +
> +       memory at 40000000 {
> +               reg = <0x40000000 0x20000000>;
> +       };
> +};
> +
> +&wdt1 {
> +       status = "okay";
> +       aspeed,reset-type = "system";
> +};
> +
> +&wdt2 {
> +       status = "okay";
> +       aspeed,reset-type = "system";
> +};
> +
> +&fmc {
> +       status = "okay";
> +       flash at 0 {
> +               status = "okay";
> +               m25p,fast-read;
> +               label = "fmc0";
> +#include "facebook-bmc-flash-layout.dtsi"
> +       };
> +};
> +
> +&uart1 {
> +       status = "okay";
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_txd1_default
> +                    &pinctrl_rxd1_default>;
> +};
> +
> +&uart3 {
> +       status = "okay";
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_txd3_default
> +                    &pinctrl_rxd3_default>;
> +};
> +
> +&uart4 {
> +       status = "okay";
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_txd4_default
> +                    &pinctrl_rxd4_default>;
> +};
> +
> +&uart5 {
> +       status = "okay";
> +};
> +
> +&mac1 {
> +       status = "okay";
> +       no-hw-checksum;
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
> +};
> +
> +&i2c0 {
> +       status = "okay";
> +};
> +
> +&i2c1 {
> +       status = "okay";
> +};
> +
> +&i2c2 {
> +       status = "okay";
> +};
> +
> +&i2c3 {
> +       status = "okay";
> +};
> +
> +&i2c4 {
> +       status = "okay";
> +};
> +
> +&i2c5 {
> +       status = "okay";
> +};
> +
> +&i2c6 {
> +       status = "okay";
> +};
> +
> +&i2c7 {
> +       status = "okay";
> +
> +       i2c-switch at 70 {
> +               compatible = "nxp,pca9548";
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +               reg = <0x70>;
> +       };
> +};
> +
> +&i2c8 {
> +       status = "okay";
> +};
> +
> +&i2c9 {
> +       status = "okay";
> +};
> +
> +&i2c10 {
> +       status = "okay";
> +};
> +
> +&i2c11 {
> +       status = "okay";
> +};
> +
> +&i2c12 {
> +       status = "okay";
> +};
> +
> +&i2c13 {
> +       status = "okay";
> +};
> +
> +&vhub {
> +       status = "okay";
> +};
> --
> 2.17.1
>