[PATCH dev-5.0 v2 4/4] ARM: dts: nuvoton: Add Quanta GSJ BMC machine.
fran.hsu at quantatw.com
fran.hsu at quantatw.com
Sat Apr 13 00:01:32 AEST 2019
From: FranHsu <Fran.Hsu at quantatw.com>
Add device tree for quanta-gsj BMC module.
Tested: Build Quanta GSJ image and load on the GSJ BMC module.
Ensure that BMC boots to console successful.
Signed-off-by: FranHsu <Fran.Hsu at quantatw.com>
---
arch/arm/boot/dts/nuvoton-npcm730-gsj.dts | 573 ++++++++++++++++++++++
1 file changed, 573 insertions(+)
create mode 100644 arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts b/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
new file mode 100644
index 000000000000..cbbe928db86f
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
@@ -0,0 +1,573 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2019 Quanta Computer lnc. Fran.Hsu at quantatw.com
+
+/dts-v1/;
+#include "nuvoton-npcm730.dtsi"
+#include "nuvoton-npcm730-gsj-gpio.dtsi"
+/ {
+ model = "Quanta GSJ Board (Device Tree v9)";
+ compatible = "nuvoton,npcm750";
+
+ aliases {
+ ethernet0 = &emc0;
+ ethernet1 = &gmac0;
+ serial3 = &serial3;
+ udc9 = &udc9;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ i2c8 = &i2c8;
+ i2c9 = &i2c9;
+ i2c10 = &i2c10;
+ i2c11 = &i2c11;
+ i2c12 = &i2c12;
+ i2c13 = &i2c13;
+ i2c14 = &i2c14;
+ i2c15 = &i2c15;
+ fiu0 = &fiu0;
+ };
+
+ chosen {
+ stdout-path = &serial3;
+ };
+
+ memory {
+ reg = <0 0x40000000>;
+ };
+
+ ahb {
+ gmac0: eth at f0802000 {
+ phy-mode = "rgmii-id";
+ status = "okay";
+ };
+
+ mc: memory-controller at f0824000 {
+ compatible = "nuvoton,npcm7xx-sdram-edac";
+ reg = <0xf0824000 0x1000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ emc0: eth at f0825000 {
+ phy-mode = "rmii";
+ use-ncsi;
+ status = "okay";
+ };
+
+ ehci1: usb at f0806000 {
+ status = "okay";
+ };
+
+ ohci1: ohci at f0807000 {
+ status = "okay";
+ };
+
+ udc9:udc at f0839000 {
+ status = "okay";
+ };
+
+ aes:aes at f0858000 {
+ status = "okay";
+ };
+
+ sha:sha at f085a000 {
+ status = "okay";
+ };
+
+ fiu0: fiu at fb000000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0cs1_pins>;
+ status = "okay";
+ spi-nor at 0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ spi-rx-bus-width = <2>;
+#include "nuvoton-npcm730-gsj-flash-layout.dtsi"
+ };
+ };
+
+ pcimbox: pcimbox at f0848000 {
+ status = "okay";
+ };
+
+ apb {
+
+ watchdog1: watchdog at 901C {
+ status = "okay";
+ };
+
+ rng: rng at b000 {
+ status = "okay";
+ };
+
+ serial0: serial at 1000 {
+ status = "okay";
+ };
+
+ serial1: serial at 2000 {
+ status = "okay";
+ };
+
+ serial2: serial at 3000 {
+ status = "okay";
+ };
+
+ serial3: serial at 4000 {
+ status = "okay";
+ };
+
+ adc: adc at c000 {
+ status = "okay";
+ };
+ otp:otp at 189000 {
+ status = "okay";
+ };
+
+ i2c0: i2c at 80000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c1: i2c at 81000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus-frequency = <100000>;
+ status = "okay";
+ lm75 at 5c {
+ compatible = "maxim,max31725";
+ reg = <0x5c>;
+ status = "okay";
+ };
+ };
+
+ i2c2: i2c at 82000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus-frequency = <100000>;
+ status = "okay";
+ lm75 at 5c {
+ compatible = "maxim,max31725";
+ reg = <0x5c>;
+ status = "okay";
+ };
+ };
+
+ i2c3: i2c at 83000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus-frequency = <100000>;
+ status = "okay";
+ lm75 at 5c {
+ compatible = "maxim,max31725";
+ reg = <0x5c>;
+ status = "okay";
+ };
+ };
+
+ i2c4: i2c at 84000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus-frequency = <100000>;
+ status = "okay";
+ lm75 at 5c {
+ compatible = "maxim,max31725";
+ reg = <0x5c>;
+ status = "okay";
+ };
+ };
+ i2c5: i2c at 85000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus-frequency = <100000>;
+ status = "disabled";
+ };
+ i2c6: i2c at 86000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c7: i2c at 87000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c8: i2c at 88000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus-frequency = <100000>;
+ status = "okay";
+ };
+
+ i2c9: i2c at 89000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus-frequency = <100000>;
+ status = "okay";
+ eeprom at 55 {
+ compatible = "atmel,24c64";
+ reg = <0x55>;
+ };
+ };
+
+ i2c10: i2c at 8a000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus-frequency = <100000>;
+ status = "okay";
+ eeprom at 55 {
+ compatible = "atmel,24c64";
+ reg = <0x55>;
+ };
+ };
+
+ i2c11: i2c at 8b000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus-frequency = <100000>;
+ status = "okay";
+
+ /* P12V Quarter Brick DC/DC Power Module Q54SH12050 @60 */
+ power-brick at 36 {
+ compatible = "delta,dps800";
+ reg = <0x36>;
+ };
+
+ hotswap at 15 {
+ compatible = "ti,lm5066i";
+ reg = <0x15>;
+ };
+ };
+
+ i2c12: i2c at 8c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus-frequency = <100000>;
+ status = "okay";
+ };
+
+ i2c13: i2c at 8d000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus-frequency = <100000>;
+ status = "okay";
+
+ ipmb at 40000010 {
+ compatible = "slave-mqueue";
+ reg = <0x40000010>;
+ status = "okay";
+ };
+ };
+
+ i2c14: i2c at 8e000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus-frequency = <100000>;
+ status = "okay";
+
+ ipmb at 40000012 {
+ compatible = "slave-mqueue";
+ reg = <0x40000012>;
+ status = "okay";
+ };
+ };
+
+ i2c15: i2c at 8f000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus-frequency = <100000>;
+ status = "okay";
+
+ i2c-switch at 75 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+ i2c-mux-idle-disconnect;
+
+ i2c_u20: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c_u21: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c_u22: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c_u23: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ i2c_u24: i2c at 4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ i2c_u25: i2c at 5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ i2c_u26: i2c at 6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ i2c_u27: i2c at 7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+ };
+
+ pwm_fan:pwm-fan-controller at 103000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pins &pwm1_pins &pwm2_pins
+ &fanin0_pins &fanin1_pins
+ &fanin2_pins &fanin3_pins
+ &fanin4_pins &fanin5_pins>;
+ status = "okay";
+ fan at 0 {
+ reg = <0x00>;
+ fan-tach-ch = /bits/ 8 <0x00 0x01>;
+ cooling-levels = <127 255>;
+ };
+ fan at 1 {
+ reg = <0x01>;
+ fan-tach-ch = /bits/ 8 <0x02 0x03>;
+ cooling-levels = /bits/ 8 <127 255>;
+ };
+ fan at 2 {
+ reg = <0x02>;
+ fan-tach-ch = /bits/ 8 <0x04 0x05>;
+ cooling-levels = /bits/ 8 <127 255>;
+ };
+ };
+
+ };
+ };
+
+ pinctrl: pinctrl at f0800000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ /* GPI pins*/
+ &gpio8_pins
+ &gpio9_pins
+ &gpio12_pins
+ &gpio13_pins
+ &gpio14_pins
+ &gpio60_pins
+ &gpio83_pins
+ &gpio91_pins
+ &gpio92_pins
+ &gpio95_pins
+ &gpio136_pins
+ &gpio137_pins
+ &gpio141_pins
+ &gpio144_pins
+ &gpio145_pins
+ &gpio146_pins
+ &gpio147_pins
+ &gpio148_pins
+ &gpio149_pins
+ &gpio150_pins
+ &gpio151_pins
+ &gpio152_pins
+ &gpio153_pins
+ &gpio154_pins
+ &gpio155_pins
+ &gpio156_pins
+ &gpio157_pins
+ &gpio158_pins
+ &gpio159_pins
+ &gpio161_pins
+ &gpio162_pins
+ &gpio163_pins
+ &gpio164_pins
+ &gpio165_pins
+ &gpio166_pins
+ &gpio167_pins
+ &gpio168_pins
+ &gpio169_pins
+ &gpio170_pins
+ &gpio177_pins
+ &gpio191_pins
+ &gpio192_pins
+ &gpio203_pins
+ /* GPO pins*/
+ &gpio0pp_pins
+ &gpio1pp_pins
+ &gpio2pp_pins
+ &gpio3pp_pins
+ &gpio4pp_pins
+ &gpio5pp_pins
+ &gpio6pp_pins
+ &gpio7pp_pins
+ &gpio10pp_pins
+ &gpio11pp_pins
+ &gpio15od_pins
+ &gpio17pp_pins
+ &gpio18pp_pins
+ &gpio19pp_pins
+ &gpio24pp_pins
+ &gpio25pp_pins
+ &gpio37od_pins
+ &gpio59pp_pins
+ &gpio72od_pins
+ &gpio73od_pins
+ &gpio74od_pins
+ &gpio75od_pins
+ &gpio76od_pins
+ &gpio77od_pins
+ &gpio78od_pins
+ &gpio79od_pins
+ &gpio84pp_pins
+ &gpio85pp_pins
+ &gpio86pp_pins
+ &gpio87pp_pins
+ &gpio88pp_pins
+ &gpio89pp_pins
+ &gpio90pp_pins
+ &gpio93pp_pins
+ &gpio94pp_pins
+ &gpio125pp_pins
+ &gpio126od_pins
+ &gpio127od_pins
+ &gpio142od_pins
+ &gpio143ol_pins
+ &gpio175od_pins
+ &gpio176od_pins
+ &gpio190od_pins
+ &gpio194pp_pins
+ &gpio195od_pins
+ &gpio196od_pins
+ &gpio197od_pins
+ &gpio198od_pins
+ &gpio199od_pins
+ &gpio200pp_pins
+ &gpio202od_pins
+ >;
+ };
+
+
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-bmc-live {
+ gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ LED_U2_0_LOCATE {
+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ LED_U2_1_LOCATE {
+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ LED_U2_2_LOCATE {
+ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ LED_U2_3_LOCATE {
+ gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ LED_U2_4_LOCATE {
+ gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ LED_U2_5_LOCATE {
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ LED_BMC_TRAY_PWRGD {
+ gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ LED_U2_7_FAULT {
+ gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ LED_U2_6_LOCATE {
+ gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ LED_U2_7_LOCATE {
+ gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ LED_U2_0_FAULT {
+ gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ LED_U2_1_FAULT {
+ gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ LED_U2_2_FAULT {
+ gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ LED_U2_3_FAULT {
+ gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ LED_U2_4_FAULT {
+ gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ LED_U2_5_FAULT {
+ gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ LED_U2_6_FAULT {
+ gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+};
--
2.21.0
More information about the openbmc
mailing list