[PATCH dev-5.0 v4 0/7] Enable video engine

Eddie James eajames at linux.ibm.com
Tue Apr 2 13:42:23 AEDT 2019


This series adds the necessary clocks for the video engine to the Aspeed clock
driver. It also adds the video engine node to the AST2500 dts and enables that
node in the witherspoon and romulus dts. It also removes the use of the reset
line in the video engine driver.

Changes since v3:
 - fix reset indices on video engine/video capture clock
 - add info to commit messages for machine dts

Changes since v2:
 - make memory-region dts property optional
 - document the memory-region property
 - only reserve 32MB for video memory
 - remove delay after clock enable - my original testing couldn't detect the
   video resolution without that delay, but now I can't repro that problem, so
   I assume it was a test setup issue?

Changes since v1:
 - new reserved memory node for video engine
 - remove reset line from video engine driver
 - no more addition of reset line to clock driver

Eddie James (7):
  media: platform: Aspeed: Remove use of reset line
  media: platform: Aspeed: Make reserved memory optional
  media: dt-bindings: aspeed-video: Add missing memory-region property
  clk: Aspeed: Setup video engine clocking
  ARM: dts: aspeed-g5: Add video engine
  ARM: dts: witherspoon: Enable video engine
  ARM: dts: romulus: Enable video engine

 .../devicetree/bindings/media/aspeed-video.txt     |  6 ++++
 arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts       | 12 +++++++
 arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts   | 12 +++++++
 arch/arm/boot/dts/aspeed-g5.dtsi                   | 10 ++++++
 drivers/clk/clk-aspeed.c                           | 42 ++++++++++++++++++++--
 drivers/media/platform/aspeed-video.c              | 33 ++++-------------
 6 files changed, 85 insertions(+), 30 deletions(-)

-- 
1.8.3.1



More information about the openbmc mailing list